xenon adjustment

skodadan · 27-06-2006, 20:44

Hi all. Im sure ive read somewhere you can adjust xenon light aim with vag com. Ive tried but when you click on the xenon range box, it says controller not found. Has anyone else had this.. cheers

Dan

Lummox · 27-06-2006, 21:15

You cant adjust the aim with VAG COM, but you do have to set into an adjustment mode before you can set them.

Headlight control is address word 55, if you cant get into it there is either a fault with your VAG COM or the control unit and/or its power supply.

Theresias · 29-06-2006, 10:38

Since it's unknown which car we are talking about here, you may also try address 29/39 which were used by older models instead of the address 55.

skodadan · 29-06-2006, 18:06

Sorry, its a 2002 octavia vrs.

Tried 29/39 aswell, but cant find any way of adjusting the aim, even with adaptation.

Theresias · 29-06-2006, 18:14

Ok, let's start from the beginning...

...when trying 29/39/55 do you get a response by any of the addresses?

Lummox · 29-06-2006, 18:18

Quote:

Originally Posted by skodadan

sorry, its a 2002 octavia vrs.

I tried 29/39, but cant find anyway to adjust the aim.

As I said in my first reply, you cant adjust the aim with VAG COM. You can only set it into basic settings then you adjust the level normally using a beam setter.

BHP · 30-09-2006, 09:53

Quote:

...when trying 29/39/55

Hi,
For me 29 is working(basic settings )........ 39 is for what???

Regards,

Theresias · 30-09-2006, 10:27

29 = Left Light (Master)
39 = Right Light (Slave)

BHP · 30-09-2006, 19:24

Hi,

29 is working but 39 shows error is this fine?????I followed this link to do.

Ross-Tech: VAG-COM: Xenon Headlamp Adjustment

Lummox · 30-09-2006, 19:27

For the Octavia 55 is used in service for setting the headlights.

BHP · 01-10-2006, 19:38

Quote:

Originally Posted by Theresias

29 = Left Light (Master)
39 = Right Light (Slave)

Should i use 29 for left and 39 for right lights????or will 29 set both right and left lights to basic settings ??

Lummox · 01-10-2006, 20:30

55 will set both lights, I have never used the other address words on a Skoda.

Theresias · 02-10-2006, 17:39

If you do have a system that uses seperate addresses, then the adjustment is being made using the master, which is 29. Please post an Auto-Scan from that car, I'd like to take a look at what you get.

BHP · 02-10-2006, 18:20

Hi,

-------------------------------------------------------------------------------
Address 29: Left Light
Part No: 1U0 941 651
Component: EVG GDL + AutoLWR 0002
Coding: 00005
Shop #: WSC 73430

No fault code found.

-------------------------------------------------------------------------------
Address 39: Right Light
Part No: 1U0 941 651
Component: EVG GDL + AutoLWR 0002
Coding: 00005
Shop #: WSC 73430

No fault code found.

-------------------------------------------------------------------------------

Is this enough or want full report????? Will check 55 again tomorrow....

Regards,

Theresias · 02-10-2006, 18:32

Yep, that's exactly what I was looking for. So based on that you have to use Address 29, which is the master. In general you either have 29 AND 39 or you have 55, never all 3.

If possible send me a complete Auto-Scan via email too.

BHP · 02-10-2006, 18:57

Hi,

Thanks a lot........Will send the Auto scan to you....How you identify master and slave???

Regards,

Theresias · 03-10-2006, 09:19

29 is always the master, so this is a general rule.

27-06-2006, 20:44	#1
skodadan Briskodian Join Date: Apr 2006 Posts: 61 Thanks: 0 Thanked 0 Times in 0 Posts	xenon adjustment Hi all. Im sure ive read somewhere you can adjust xenon light aim with vag com. Ive tried but when you click on the xenon range box, it says controller not found. Has anyone else had this.. cheers Dan

27-06-2006, 21:15	#2
Lummox Hairy Yeti Join Date: Sep 2003 Location: Newport Pagnell Posts: 21,160 Thanks: 18 Thanked 538 Times in 470 Posts	Re: xenon adjustment You cant adjust the aim with VAG COM, but you do have to set into an adjustment mode before you can set them. Headlight control is address word 55, if you cant get into it there is either a fault with your VAG COM or the control unit and/or its power supply. __________________ MK2 Golf GTi - APX 225bhp 1.8T - Emerald K3 - Quaife ATB - VR6 Widetrack - VR6 brakes front and rear - Neuspeed ARBs - Speedline alloys - H+R coilovers - Powerflex bushes - Helix clutch G60 flywheel - Adjustable solid top mounts - Custom engine bay - Tornado Motorsport MSA cage - and lots lots more.

29-06-2006, 10:38	#3
Theresias Briskodian Join Date: Apr 2006 Location: Mid Germany Posts: 389 Thanks: 0 Thanked 26 Times in 23 Posts	Re: xenon adjustment Since it's unknown which car we are talking about here, you may also try address 29/39 which were used by older models instead of the address 55. __________________ Sebastian

29-06-2006, 18:06	#4
skodadan Briskodian Join Date: Apr 2006 Posts: 61 Thanks: 0 Thanked 0 Times in 0 Posts	Re: xenon adjustment Sorry, its a 2002 octavia vrs. Tried 29/39 aswell, but cant find any way of adjusting the aim, even with adaptation.

29-06-2006, 18:14	#5
Theresias Briskodian Join Date: Apr 2006 Location: Mid Germany Posts: 389 Thanks: 0 Thanked 26 Times in 23 Posts	Re: xenon adjustment Ok, let's start from the beginning... ...when trying 29/39/55 do you get a response by any of the addresses? __________________ Sebastian

30-09-2006, 10:27	#8
Theresias Briskodian Join Date: Apr 2006 Location: Mid Germany Posts: 389 Thanks: 0 Thanked 26 Times in 23 Posts	Re: xenon adjustment 29 = Left Light (Master) 39 = Right Light (Slave) __________________ Sebastian

30-09-2006, 19:24	#9
BHP Briskodian Join Date: Apr 2005 Location: India Posts: 30 Thanks: 0 Thanked 0 Times in 0 Posts	Re: xenon adjustment Hi, 29 is working but 39 shows error is this fine?????I followed this link to do. Ross-Tech: VAG-COM: Xenon Headlamp Adjustment

30-09-2006, 19:27	#10
Lummox Hairy Yeti Join Date: Sep 2003 Location: Newport Pagnell Posts: 21,160 Thanks: 18 Thanked 538 Times in 470 Posts	Re: xenon adjustment For the Octavia 55 is used in service for setting the headlights. __________________ MK2 Golf GTi - APX 225bhp 1.8T - Emerald K3 - Quaife ATB - VR6 Widetrack - VR6 brakes front and rear - Neuspeed ARBs - Speedline alloys - H+R coilovers - Powerflex bushes - Helix clutch G60 flywheel - Adjustable solid top mounts - Custom engine bay - Tornado Motorsport MSA cage - and lots lots more.

01-10-2006, 20:30	#12
Lummox Hairy Yeti Join Date: Sep 2003 Location: Newport Pagnell Posts: 21,160 Thanks: 18 Thanked 538 Times in 470 Posts	Re: xenon adjustment 55 will set both lights, I have never used the other address words on a Skoda. __________________ MK2 Golf GTi - APX 225bhp 1.8T - Emerald K3 - Quaife ATB - VR6 Widetrack - VR6 brakes front and rear - Neuspeed ARBs - Speedline alloys - H+R coilovers - Powerflex bushes - Helix clutch G60 flywheel - Adjustable solid top mounts - Custom engine bay - Tornado Motorsport MSA cage - and lots lots more.

02-10-2006, 17:39	#13
Theresias Briskodian Join Date: Apr 2006 Location: Mid Germany Posts: 389 Thanks: 0 Thanked 26 Times in 23 Posts	Re: xenon adjustment If you do have a system that uses seperate addresses, then the adjustment is being made using the master, which is 29. Please post an Auto-Scan from that car, I'd like to take a look at what you get. __________________ Sebastian

02-10-2006, 18:20	#14
BHP Briskodian Join Date: Apr 2005 Location: India Posts: 30 Thanks: 0 Thanked 0 Times in 0 Posts	Re: xenon adjustment Hi, ------------------------------------------------------------------------------- Address 29: Left Light Part No: 1U0 941 651 Component: EVG GDL + AutoLWR 0002 Coding: 00005 Shop #: WSC 73430 No fault code found. ------------------------------------------------------------------------------- Address 39: Right Light Part No: 1U0 941 651 Component: EVG GDL + AutoLWR 0002 Coding: 00005 Shop #: WSC 73430 No fault code found. ------------------------------------------------------------------------------- Is this enough or want full report????? Will check 55 again tomorrow.... Regards,

02-10-2006, 18:32	#15
Theresias Briskodian Join Date: Apr 2006 Location: Mid Germany Posts: 389 Thanks: 0 Thanked 26 Times in 23 Posts	Re: xenon adjustment Yep, that's exactly what I was looking for. So based on that you have to use Address 29, which is the master. In general you either have 29 AND 39 or you have 55, never all 3. If possible send me a complete Auto-Scan via email too. __________________ Sebastian

02-10-2006, 18:57	#16
BHP Briskodian Join Date: Apr 2005 Location: India Posts: 30 Thanks: 0 Thanked 0 Times in 0 Posts	Re: xenon adjustment Hi, Thanks a lot........Will send the Auto scan to you....How you identify master and slave??? Regards,

03-10-2006, 09:19	#17
Theresias Briskodian Join Date: Apr 2006 Location: Mid Germany Posts: 389 Thanks: 0 Thanked 26 Times in 23 Posts	Re: xenon adjustment 29 is always the master, so this is a general rule. __________________ Sebastian

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode