pedpasos

Te upper fuses are everytime powered. The down ones are powered only when the car is powered. I have installed the screen mirror with dashboard cam by connecting red wire to +12V, yellow wire called "ACC" to the key managed fuse slot. I found several spaces without fuse.

Hello. Just installed the mirror, and lloks great! The problem is that it remains with the green light on when the car is closed. Does anyone know wich fuse slot are key manged? I mean, only powered if the key is on. Thanks!

Hello after getting crazy with vcds with no chance of having image on radio screen i've decided to try this: https://es.aliexpress.com/store/product/HD-1920x1080P-5-IPS-LCD-Auto-Dimming-Anti-glare-Rearview-Mirror-DVR-Recorder-Monitor-With-Original/1187689_32792184472.html?spm=a219c.search0104.3.16.204b36e2TBAP3W&ws_ab_test=searchweb0_0,searchweb201602_2_10152_10151_10065_10344_10068_10342_10547_10343_10340_10548_10341_10084_10083_10618_10307_10301_10303_5722316_5711212_10313_10059_10184_10534_100031_10103_10626_10625_10624_10623_10622_10621_10620_10142,searchweb201603_25,ppcSwitch_5&algo_expid=6baf6c1e-398b-4bbe-aeca-812a104be287-2&algo_pvid=6baf6c1e-398b-4bbe-aeca-812a104be287&transAbTest=ae803_5&priceBeautifyAB=0

Thankyou very much! That are 3 operative buttons?

Hello. I am thinking about conecting my garage command on one of the buttons of the left panel of my skoda fabia: Anyone knows if i can buy a spare of those buttons?? Thanks!

I decided to take wireless option, due to the complication of routing more than 6 meters of video wire through the car. At this moment i have only half of the installation (only the rear camera mounted, and connectad to the rear lamp). I have tried to have image on an external screen, and it works reasonably well. A little interference probably due to the 12v noise on the car. I can be easily solved by adding a chocke coil based filter, but for me is okay. I only want to see something about rear on the screen. I tried to activate rearview option via VCDS without success. I tried also other mods that i founded here: I can't do any of these, and o dont know why. About the control menus, that are: -INSTALLED -DRIVETRAIN -CHASSIS -COMFORT/CONV -ELECTRONICS 1 -ELECTRONICS 2 I only can access to the first one, "INSTALLED", and when i tried to activate the only option that i found (hill hold control), when i tried to "Do it" it appeared a warning on the radio screen with problems with the tire pressure, and anothe warning with the front assist. After getting petrified, i turned off the car and restarted two times, and it dissapeared. It seems that there is a problem with my vagcom. On the hardware issues, i have not be able to extract the radio unit, despite te fact of using the apropiate keys... they didn't grab correcly. To resume: Camera installed, it works ok. I don't know where to have 12v on the radio area, where i have to put the wireless receiver. I don't know how to extract the radio without broking anything. I dont' know the procedure (all steps, including if i have to turn the key, or start the engine... etc.) for activating the rearview with VCDS. Thankyou every one! T

Hello, i finally tried to install the rearview today. Here some pics:

edit: OK, after googling a bit I have found all you said: Signal wire to pin 6. Ground wire to pin 12. Terminals 000 979 009: https://www.my-gti.com/1294/volkswagen-head-unit-housings-and-pins

Have you the pin list of swing 2?? thanks!

Thankyou very much! Now, another little question: Could yo take a photo of the original connector? I have bought a connector like this, but i dont know if it will work: Thanks!

hello, PixiTrabi, could you explain me where have i to do to activate RCV on the 5F module?? Thanks!

Hello, sorry by the delay, but i am a little busy this days. Just received the vagcom (17.8 version) and plugged it to the car. Looking at the menus on VCDS, i didn't found any "Navigation" option, that is where should be the long bit coding for rearview. I have to say that i didn't lose too many time looking at the different options, cause i had no time that day. I will write with more info when i have the oportunity of looking better. Salutations.

What do you mean with that? Do you think that the chinese radios are able to run wheel buttons? Do you refer to the "car" button options, such as greendrive, fuel consumption etc.? For me it is ok if i can see this info on the sreen of the car board. Thanks!

Hello, I am still waiting for the camera. After trying to connect vcds 409.1 with an old vag-com i decided tu buy a vcds 17.8 compatible one, when i recive it, i will try to activate the code, and to have or not signal on the screen. Now my question is if i have to trigger the radio via the blue line that comes with the video wire, and if i have to do with +12V? I prefer to make the installation wired, but i have bought also the wireless kit. I don't know where to connect the receiver, maybe on the lighter, or maybe with an "add a circuit" attached on the fuse box: Other option is to buy an after market radio came from china that allows all the options plus gps. (there are around 300€, but i am scared abut the import taxes).