Jump to content

nutskoda

Members
  • Posts

    34
  • Joined

  • Last visited

Car Info

  • Model
    ?octavia 1.6

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

nutskoda's Achievements

Contributor

Contributor (5/17)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. hi,,that is a nice job you done their ,it came up well ,i gave mine a clean but not as good as that,the car will run fine now,job well done,,
  2. check to see that it has not come loose from its mounting,,if it has put it back and some insulation tape tight around it to stop it coming loose again,if it has not come loose while you are their take it off and bring it with you when you are getting the new one so you can get the same one,,good luck,and take care,,,,,
  3. HI, had the same problem with the egg smell,have you tried to scan for fault codes, or pending codes,mine was the EGR valve. that could be something to do with it,sometimes it can get stuck with carbon ,hope you get it sorted out soon, all the best
  4. HI,, POSI TAPS DOSE ANYBODY KNOW WHERE I CAN GET HOLD OF THESE THINGS,IN UK OR IRELAND.I HAVE BEEN LOOKING ON EBAY AND NO JOY,,THEY BREAK THE INSULATION ON A WIRE TO MAKE A CONNECTION ,,I AM ALSO LOOKING FOR AN INSULATION PIERCING PROBE FOR MY MULTIMETER ,,CANNOT FIND ONE OF THESE ,,I WILL NEED THEM FOR MY ALARM FITTING PROJECT,,I WILL SOLDER ALL THE CONNECTIONS,BUT USE THE POSI TAP TO CHECK THAT I HAVE THE RIGHT WIRE ,,THIS MAY TAKE SOME TIME ,,,,
  5. HI,, I WANT TO FIT A ALARM TO MY OCTAVIA,,WHERE CAN I FIND A DIAGRAM TO FIT IT,AS IN ,WINDOWS CLOSE,CENTRAL LOCKING,,I WANT TO USE MY KEY FOB TO ARM AND DISARM ,,THIS IS MY NEXT PROJECT,SO I HAVE A BIT OF STUDY TO DO ,ANY INFO WELCOME,THANK YOU,,,,,,,,,
  6. THANKS FOR THE ADVICE ,,GETTING TO LEARN ALL ABOUT SKODA CARS ,,THANKS AGAIN,,,,,,,,,
  7. I HAD THE SAME..IT WAS THE NUMBER PLATE ,,THE CENTER OF IT HAD COME AWAY JUST ENOUGH TO VIBRATE WHEN I ACCELERATED ,I THOUGHT THE EXHAUST HAD COME LOOSE,,
  8. HI TO ALL,,,,,I WOULD LIKE TO FIT A ALARM TO MY OCTAVIA 1.9TDI, IS THEIR MUCH INVOLVED, WHAT ALARM IS NOT TOO HARD TO FIT,,FOR A DIY JOB, CAN I USE THE CENTRAL LOCKING KEY STANDERD TO THE CAR TO ARM THE ALARM,, OR WILL I HAVE TO USE THE ONE THAT COMES WITH THE ALARM?
  9. GREAT, THANK YOU,I WAS NOT SURE WITH SO MANY TYPES OUT THEIR,THANKS AGAIN,,,,
  10. HI TO ALL,,I WANT TO FIT A ALARM TO MY OCTAVIA ,WHAT IS THE BEST ALARM TO FIT ,AND AN EASY ONE TO FIT MYSELF ,IS THEIR MUCH INVOLVED TO FIT IT MYSELF, THANK YOU,,,
  11. THANK YOU VERY MUCH FOR YOUR ADVICE,I HAVE ,,
  12. WHAT IS THE BEST MAKE OF OIL FOR MY 07 OCTAVIA 1.9TDI ,HALLFORDS OIL IS THAT ANY GOOD,FOR MY CAR ,SHELL ,,MOBIL,, TEXACO,,WHAT IS THE BEST TO USE.
  13. I USED THE OLD GASKET AS I NEEDED THE CAR BACK ON THE ROAD,ASAP,IT SEEMS TO BE SEALED OK,
  14. YES I THINK THAT WOULD BE THE WAY TO GO ,,POLIHS THE PORTS ,THE NEXT TIME,THAT WOULD BE MY NEXT JOB I THINK ,THANKS FOR THE PICS,
  15. MY OCTAIVA 1.6 I STARTED TO RUN VERY ROUGH I THOUGHT IT WAS THE PETROL PUMP OR SOMETHING LIKE THAT,,, ,THE FAULT LIGHT ON ,THE CAR WAS RUNNING VERY ROUGH,I SCANNED THE FAULT CODE ,IT CAME UP, P0404 ERG,,.I TOOK OFF THE ERG VALVE,IT WAS BLACK FULL OF CARBON ,THE STEM ON THE VALVE WAS JAMMED WITH CARBON ,,SPRAYED IT WITH ENGINE CLEANER AND SCRAPED THE CARBON OFF THE STEM OF THE VALVE ,WASHED IT OUT,SPRAYED IT WITH WD 40 ,,FITTED IT BACK ON AND THE CAR IS BACK ON THE ROAD,FOR ANOTHER WHILE,
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.