nick74
Members-
Posts
928 -
Joined
-
Last visited
Profile Information
-
Gender
Not Telling
-
Location
Lincolnshire
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
nick74's Achievements
-
can a map for a BXE be used on a BKC?
nick74 replied to cypher007's topic in Skoda Octavia Mk II (2004 - 2013)
CO2 is produced directly proportional to the amount of fuel burnt over a given distance, so a bigger heavier car will tend to have worse CO2 emission figures, even if other pollutant levels are lower. Also some pollution control features, such as DPFs, can actually make CO2 emissions worse rather than better. -
My 2007 Elegance had headlamp washers with conventional halogen headlamps too.
-
mk2 fl or mk3 octavia parts on a pre face mk2..
nick74 replied to vrs09's topic in Skoda Octavia Mk II (2004 - 2013)
Facelift tyres will fit a pre-facelift 😉 Seriously though, you need to be a bit more specific on what you are thinking of changing? It's all down to personal taste, I liked the look of the pre-facelift mk2 better than the facelift so wouldn't change anything, but it's up to you. -
High Oil Temperature 114-120 degrees
nick74 replied to alanpartridge's topic in Skoda Octavia Mk II (2004 - 2013)
Not meaning to sound flippant, but does measuring oil temperature to this degree really matter? My understanding was that the only reason an oil temperature sensor was fitted was as a part the variable distance service indicator system. Then someone at VW presumably went 'Hey, we could use this data to display the oil temp on the dash, that might be interesting.....' Surely on a water-cooled engine any sign of overheating would be quickly reflected in the coolant temperature?The oil temperature just does what it does. -
2007 Octavia VRS CD or PR Engine?
nick74 replied to HFM66's topic in Skoda Octavia Mk II (2004 - 2013)
That year would have had a PD engine with a DPF. -
Diesel Fuel Injectors advice
nick74 replied to sealover1's topic in Skoda Octavia Mk II (2004 - 2013)
It's hard to tell from the pic but that looks perhaps like a slow oil leak coming from somewhere. Is it definitely not coming out from round the glow plug? If the glow plug was loose you could possibly get combustion gasses escaping past it. You won't see anything of the injectors on a PD engine without taking the cam cover off, so whatever that black gunge is it's very likely nothing to do with the injectors or injector seals. -
It's been years since I recalibrated one of these but from memory you can only adjust the MPG display by a maximum of 15% in either direction. Yours is slightly more inaccurate than 15% though so you will never be able to get it absolutely spot on. Basically the default value is 100 and if I remember correctly you increase that value to correct an overly optimistic MPG display, and reduce it to correct a pessimistic MPG display (someone please correct me if I've got that the wrong way round!). The lowest it will go is 85 and the highest is 115. So, to get your display as accurate as it can be you would need to set the value to 85.
-
The fact that it was on 90 suggests that someone might have been there and adjusted it before. Normally they are set to 100% at the factory and you adjust the percentage up or down depending on what % you think the MPG display is either optimistic or pessimistic. Anyway it won't do any harm to start at 100 and see whether that makes the accuracy better or worse.
-
I found after a cambelt change that a small change in the torsion value made a significant difference to the MPG shown on the dash display.... but no noticeable difference at all to the actual MPG measured brim to brim over a few full tanks. For some reason the torsion setting seems to have a big effect on the accuracy of the fuel consumption display. Worth checking the actual MPG for a while before condemning the current cam torsion setting. You may find its actually OK. If so you can do what I did and use VCDS to tweak the dash display MPG by a few % to make it accurate again.
-
Would a wing mirror put the bulb indicator light on
nick74 replied to Russ3953's topic in Skoda Octavia Mk II (2004 - 2013)
When one of my LED mirror indicators failed, no it didn't put the bulb warning light on. Over the years I owned the car I did have an intermittent problem with the front sidelight bulbs having a slightly poor contact in the socket and putting the bulb warning light on however. -
Unwanted power surge - 2007 Octy 2.0 TDi 140 (BKD engine)
nick74 replied to KimT's topic in Skoda Octavia Mk II (2004 - 2013)
If the tandem pump was leaking diesel into the engine oil in a seriously big way it could possibly cause runaway of the engine. You would tend to notice a rapidly rising engine oil level before that happened though. By the way, the BKD is 16v and was one of the last of the PD engines. The newer common rail TDis don't have a tandem pump.- 10 replies
-
- turbo boost
- erratic running
- (and 10 more)
-
I used Goodyear Vector 4 Seasons on my standard front wheel drive Octavia during the bad winters of 2010-11 and 2011-12. They were good enough in the snow to convince me I don't ever need four wheel drive, so I imagine on a Scout they would be unstoppable! They were hard to fault in hot weather too, perhaps very slightly noisy on hot tarmac but that was the only issue. Got about 30k from a set I think.
-
strange noise when engine turned off
nick74 replied to mixskoda's topic in Skoda Octavia Mk II (2004 - 2013)
Hey! I hardly visit this forum now as I sold my Octavia in 2014, but I got an email saying someone had quoted my post. Your problem sounds odd, particularly the intake hose getting puffy on acceleration. I wonder if you have a partially blocked intercooler? Or Perhaps the anti shudder flap is sticking partly closed?