Jump to content

Help! My EPC (Emissions) or CEL (Check Engine Lamp) is on.


cjb

Recommended Posts

Help! My EPC (Emissions) or CEL (Check Engine Lamp) is on.

There's a very simple thing to check first: your brakelights. If they don't work, check the brake pedal switch. It's a common fault. Also have a look for anything obvious like a loose or failed HT lead, or an audible air leak if that's appropriate for your car.

Other than that, you really need to get your car scanned by someone with VAG-COM (VCDS), a VAS computer (the one dealers have), or a OBD-II scanner.

Of these, the VAS or VCDS/VAG-COM is your best bet as it can read and decode more faults from the car.

You have several ways of getting the car scanned:

* You can pay a Skoda (or other VAG) dealer. Typically this will cost at least £40.

* You can pay an independent garage. This will be a bit cheaper, but unless the garage specialises in VAG cars, it will probably only have a generic scanner.

* You can ask here in the VAG-COM and diagnostics forum. Look at the member map. If there's someone near you, send them a PM, and negotiate a price- which may just be a pint or two.

* You could obtain VAG-COM/VCDS or a code reader yourself. This can cost as little as £20ish for an ebay cable and a limited downloadable version of VAG-COM, but a fully licenced version (with full capability and support from Ross-Tech) costs more.

For later cars (Octavia II and Superb II), you need a CAN-capable scanner or a version of VAG-COM and appropriate genuine Ross-Tech cable that supports CAN-only cars.

A scan really is the only way to try to diagnose a CEL/EPC light, and often odd running problems as well. If you post the logs from the scanner on this site, someone will have a chance of solving your problem. Otherwise, it's just wild guesswork and you could be checking and changing things for ever.

Link to comment
Share on other sites

  • 5 years later...

Hi,I'm suffering this warning light being on firstly the first link about the break peddle switch in the above post is dead. Since I'm posting I'll ask this anyway, my high centre break light is still working it's just the left/right lamps that are not, would this still be the break peddle switch?

Link to comment
Share on other sites

  • 1 month later...
  • 7 years later...

Have you checked your filler cap? I've filled up before in my old car and if the petrol cap wasn't twisted beyond the clicks, I'd get the light coming on and even a go slow mode. Refill and re tighten worked for me.

 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Community Partner

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.