LED number plate lights standard?

[Madis28]

might try tps and see how much they are.  so the 1K8943021C oem numberplate lights will be plug and play with no bulb out errors

 

They will give bulb out errors without coding. Mine cost 68€.

[rumiexile]

Well I bought the original Leds from this topic, but for my experience my MY2011 gives bulb out error. Fits perfectly to the same slot. Coding only stops cold checking, when your lights are lit you'll see the warning light. Maybe it is because of my BCM, I dont know

http://www.cars-equipment.com/www/en/shop/lighting-3/oem-3af943021a-led-license-plate-light/

Edited 20 January, 2014 by rumiexile

[rabmurray121]

Too Tall,

 

These LED lights wont work with the Octavia 3 are the Superb 2 facelift as the connections are different. I have just found this out when I went to swap my lights from the pre-facelift to the new facelift with modification

[Robfab]

Only just seen this, I believe they are on the Golf GTD and are different the octavia 3 i could be wrong but

Sent from my iPhone using Tapatalk

[vrsadz]

if i purchased these 1k8943021c for my superb would fitting these

 

 

http://www.ebay.co.uk/itm/200827419879?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D200827419879%26_rdc%3D1

 

would they be ok and cancel out the bulb warning

[Robfab]

Should do yes, i have the resistors in place and it has cancelled mine

Sent from my iPhone using Tapatalk

[tmg]

Hi

 

so when you are coding this error out, there are two bits to check - byte 17 in the long coding helper for central electrics lets you turn off the pulse modulation check so you can use LEDs (all that i have done on mine) and you can also disable cold check a few bits further along the coding string.

 

t.

Edited 27 January, 2014 by tmg