Ash's Octy VRS Build Thread

[TERKIN]

forget that you need a set of mint calibre pros with new tyres

 

vr6 clutch and smf should be next

[AshleyHart]

forget that you need a set of mint calibre pros with new tyres

 

vr6 clutch and smf should be next

 

What are they, I don't think I have ever seen them before?

[TERKIN]

few pics

 

[AshleyHart]

I'm surprised, they suit the car well to be honest. The only thing i dislike about the Octavia is the huge arse end. 

[TERKIN]

hehe im selling those

 

well your stuck with that im afraid

[AshleyHart]

hehe im selling those

 

well your stuck with that im afraid

 

Haha yea, I will be looking for comps or something different that has not been done before.

[AshleyHart]

Just a quick update, the VRS is now off the road for winter and I am planning to get it to around 300BHP. Any ideas on the mods I would require/turbo?

[MR G]

a ko3 hybrid will get you to that power but you'll need,fmic,turbo back exhaust,and at around 300bhp you'll need new rods etc in your engine and a lsd in your gearbox plus don't forget better brakes suspension......lots of money good luck

[skud missile]

Hmm to get hybrid KO3 to get that sort of power your looking at tubular manifold and wmi or your egt will go through the roof.

Also when you replace the rods make sure you get gun drilled or it'll b good bye mister wrist pin!

Bigger injectors, clutch...SMF ideally.

[VRade]

You'd need a hybrid K04 most likely 

 

K03s will do about 280ish

 

Although a Gt2871 will do 330+ for abit more cost (Ish) as a K04 hybrid swap.

[skud missile]

Concentrate on building a bomb proof motor first. Believe me it's not cheap but very doable.

Check out my build thread:

http://www.briskoda.net/forums/topic/289807-its-good-to-have-the-old-girl-back/

Yes it's a S3 but the. Lock is more or less the same

Edited 5 November, 2013 by skud missile

[missingmyvrs]

K300 will easily do over 300bhp with correct supporting mods

You will need rods at that power

Standard head will be fine

2.5 inch single pass intercooler

Sfs large intake pipe

3inxh maf

Cupra r injectors

3 inch down pipe

225 fuel pump

Ported oem mannifold

Above will run 300bhp with the right person mapping

Proven time and Time again great turbo k300

[AshleyHart]

I must admit I miss this car and wish I never sold it. I am contemplating getting another but in black.

[Jimbling]

Do it

[YellowCar]

Must be catching. I've been looking at them again, can't afford it yet though...