patch map.file to remove egr

[Livy]

I noticed the other day something about editing the ecu file to disable the egr.

I've just fitted my egr and not ready for a remap just yet so was wondering if anyone could give me a few pointers on editing the map to disable the egr and map out the eml. Thanks

[SKYHAWK]

it has to be mapped out i believe m8 when mapped

[Livy]

i had seen a topic the other day and someone had done the mapping therselves to flatten the egr map.

I have a galletto 1260 lead to read and flash the ecu.

[hutchysrs50]

You can reduce the flow of the egr valve which might stop the eml light coming on for abit but doesn't remove it completely... If that's what your referring to.

[Sam84]

it tells you how to reduce the flow in that guidebook that was put on for vcds coding

[KeithCheetham]

http://www.briskoda.net/forums/topic/282883-map-out-egr-system/?hl=%2Bedc15p#entry3401405

 

 I used an MPPS cable.

Edited 31 October, 2014 by KeithCheetham

[faboka vrs]

Read above

[Livy]

Cheers guys. That's what I was after.

Any hints or tips?

I've got the software