Oil Breather Pipe, Code needed for part and VAG COM Commands.

[KangarooReviews2014]

Hi all, Just wanting some help.

 

I am buying a new car (Skoda Fabia 1.2 12V 64bhp) and the breather pipe needs replacing. Now I need the part number for it however the car isn't on my drive and I wondered if anyone here would know?

 

Also I would like to know the VAG COM commands for wiping the old codes out because the car keeps going into liping mode.

 

So if you have any sugestions, It would be much appreciated.

Thank You!

Edited 17 April, 2015 by KangarooReviews2014

[hutchysrs50]

The breather from the cam carrier to the air box/engine cover?

[KangarooReviews2014]

Yes, it is that pipe.

Edited 17 April, 2015 by KangarooReviews2014

[Breezy_Pete]

Ref 20, here?

[KangarooReviews2014]

Okay Thank you. Does anyone know the Diameter of it and where that pipe goes to?

 

Thank you!

Edited 17 April, 2015 by KangarooReviews2014

[hutchysrs50]

looks a good website, better than vagcat which I normally use.

[KangarooReviews2014]

Okay Thank you. Does anyone know the Diameter of it and where that pipe goes to?

 

Thank you!

[hutchysrs50]

It's a simple push on pipe attached to the engine cover/air box, and the other end pushing onto the cam carrier.

Don't know diameter but guessing 8mm ID hose.

It doesn't do a great deal, I've drove the car with it off completely, oil splashes out and onto the inlet manifold but drives pretty similar.