Jump to content

PastyBadge Group Buy #12


PastyBoy

Recommended Posts

Been a while since i organised one so i thought i'd see if there is any interest in a new round of badges.

  

Running in the same format as all the previous Group Buys the badges are a flexible self-adhesive backed vinyl printed with the chosen design and finished with a clear resin dome to give a pronounced finish and protection and durability.
They work equally well stuck over the OEM badge or in place of them.
They can also be shrunk down and used as alloy wheel or steering wheel centres too!

Pretty much anything goes - solid flat colours to a coloured vinyl are the best finish but full colour designs can be printed to white vinyl. 
The choice really is yours however a few for inspiration (and if you want any of these designs try to quote what i call them and your colour choice)

Retro

3643720524_23b3e044a6.jpg

 

Retro in Lime Green & Black

 

post-64344-13477322247059.jpg

 

Autobot Steering whel centre 

also in lime and black

 

014.jpg

 

Skoda Motosport


IMG00013-20091021-1814.jpg

Custom Full colour designs
(I'd need you to supply "print ready" artwork for something this complex!)

zn7bk5.jpg

 

post-32928-0-42573800-1314480250.jpg


OEM Badge minus the green

original5-1.jpg

 

My version of the new 2013 Badge

 

2013SilveronBlack_zps12681155.jpg



 

Which can be done in whatever colour/colours one fancies

 

Skoda2013Green_zpsd6e763fc.jpg

 

2013BlackonRed_zpsf134c405.jpg

VRS logo on black alloy centres!

IMG_0415.jpg
 

Here is a link to the photobucket album where i have dumped most badge artworks and images

feel free to browse and let it guide your decisions

the images should be named just try to use that as what you put on the list  :thumbup:

 

PastyBadge Design Gallery

 

However don't feel limited by this collection, and not everything i have produced is in there.

Everything is produced to order so you can be unique or have a badge shown in a different colour combo if required.

 

If you're interested start a list in the normal Group Buy fashion along with the sizing you want.

 

Quote

Quote

Quote

 


Pasty Boy - Retro - Silver on Black - 80mm x2

I've done most cars now but it is your responsibility to make sure you request the correct sizing!
As a very rough guide off the top of my head from memory

Fabia & Octy mk1 - 80mm bonnet and boot - 55mm alloy centres
Fabia & Octy mk2 - 80mm boot & 88mm bonnet - 55mm alloy centres
Superb mk1 - 88mm bonnet & 92mm boot
Superb mk2 - 90mm bonnet and boot

If in doubt.... get a ruler out!!

As a guide larger badges are about £10 and the alloy centres around £6 when produced on their own but normally come down to around £6.50 and £4 respectively.

Things like extra colours in the design, larger size, international shipping add to the cost but once the quantity is up to a sizeable amount I will discuss with the printer and sort out pricing and everyone will then get a PM to confirm their requirements, the costs there of, delivery details and payment details.

Once the quantity gets up to enough to warrant the maximum discount (generally around 100 badges) I shall contact everyone via PM to confirm design, sizing and cost; and to request payment.

Once all payments are in I shall hit the button! 

 

Generally these things take a month to go down and then a couple of weeks to be produced and posted

Any questions ask away 

 

However don't feel limited by this collection, and not everything i have produced is in there.

Everything is produced to order so you can be unique or have a badge shown in a different colour combo if required.

 

If you're interested start a list in the normal Group Buy fashion along with the sizing you want.

 

Pasty Boy - Retro - Silver on Black - 80mm x2

 

I've done most cars now but it is your responsibility to make sure you request the correct sizing!
As a very rough guide off the top of my head from memory

Fabia & Octy mk1 - 80mm bonnet and boot - 55mm alloy centres
Fabia & Octy mk2 - 80mm boot & 88mm bonnet - 55mm alloy centres
Superb mk1 - 88mm bonnet & 92mm boot
Superb mk2 - 90mm bonnet and boot

If in doubt.... get a ruler out!!

As a guide larger badges are about £10 and the alloy centres around £6 when produced on their own but normally come down to around £6.50 and £4 respectively.

Things like extra colours in the design, larger size, international shipping add to the cost but once the quantity is up to a sizeable amount I will discuss with the printer and sort out pricing and everyone will then get a PM to confirm their requirements, the costs there of, delivery details and payment details.

Once the quantity gets up to enough to warrant the maximum discount (generally around 100 badges) I shall contact everyone via PM to confirm design, sizing and cost; and to request payment.

Once all payments are in I shall hit the button! 

 

Generally these things take a month to go down and then a couple of weeks to be produced and posted

Any questions ask away 

  • Like 2
Link to comment
Share on other sites

You've posted a few things twice buddy like dimensions and pictures.

LGM - OEM red on black - 1x boot 80mm, 1x bonnet 88mm and 4x vrs logo alloy centres please.

P.s. I'm away on holiday from the 29th of May til the 12th of June.

Link to comment
Share on other sites

One new style black/silver logo for the steering wheel sized badge (I'll measure it and amend this post).

How accurate do you need the measuring to be and how accurate are your sizings?

Link to comment
Share on other sites

You've posted a few things twice buddy like dimensions and pictures.

 

Indeed. Looks like I got copy&paste happy but have now fixed

 

How accurate do you need the measuring to be and how accurate are your sizings?

 

We can do down to the mm so have a measure and let me know

 

 

 

Updated and collated list as follows

 

1 -  vRS Joe - OEM minus green - 80mm x2 & 55mm x x4 

2 - Tempra007 - Custom design - 80mm x 1, 88mm x 1 & 60mm x 4

3 - LGM - OEM red on black - 80mm x1, 88mm x1 & vrs logo on black  - 55mm x4

4 - jakko27 - 2013 - black on red - 80mm x1

5 - tee - skoda motorsport - TBC

6 - KBPhoto - 2014 silver on black - TBC

Link to comment
Share on other sites

pdated and collated list as follows


 


1 -  vRS Joe - OEM minus green - 80mm x2 & 55mm x x4 


2 - Tempra007 - Custom design - 80mm x 1, 88mm x 1 & 60mm x 4


3 - LGM - OEM red on black - 80mm x1, 88mm x1 & vrs logo on black  - 55mm x4


4 - jakko27 - 2013 - black on red - 80mm x1


5 - tee - skoda motorsport - TBC


6 - KBPhoto - 2014 silver on black - TBC


7 - Getulus - OEM wheel centres 55mm x 4.

Link to comment
Share on other sites

1 - vRS Joe - OEM minus green - 80mm x2 & 55mm x x4

2 - Tempra007 - Custom design - 80mm x 1, 88mm x 1 & 60mm x 4

3 - LGM - OEM red on black - 80mm x1, 88mm x1 & vrs logo on black - 55mm x4

4 - jakko27 - 2013 - black on red - 80mm x1

5 - tee - skoda motorsport - TBC

6 - KBPhoto - 2014 silver on black without silver border/ring - 40mm (domed if possible) x1

7 - Getulus - OEM wheel centre

Link to comment
Share on other sites

Indeed. Looks like I got copy&paste happy but have now fixed

We can do down to the mm so have a measure and let me know

Updated and collated list as follows

1 - vRS Joe - OEM minus green - 80mm x2 & 55mm x x4

2 - Tempra007 - Custom design - 80mm x 1, 88mm x 1 & 60mm x 4

3 - LGM - OEM red on black - 80mm x1, 88mm x1 & vrs logo on black - 55mm x4

4 - jakko27 - 2013 - black on red - 80mm x1

5 - tee - skoda motorsport - TBC

6 - KBPhoto - 2014 silver on black - TBC

Mate can you check your pms and get back to me? I payed for badges 2 weeks ago and havent heard from you?

Dale

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

  • 2 weeks later...

This gonna sound really daft but the price for the wheel centres is that each or the set ?

From what I remember from the last GB it's each.

I'm picking my new furby up on Saturday so will let you know what badges ill be needing pasty.

Link to comment
Share on other sites

Hey buddy i want the mark 1 Vrs fabia green and black badges front and back also same full set of wheel badges can you pm me please do you except paypal? if so get back to me Pasty please

 

:notme:

Link to comment
Share on other sites

Sorry all have become Skodaless so have not been around much

 

Updated list as follows

 

1 -  vRS Joe - OEM minus green - 80mm x2 & 55mm x x4 

2 - Tempra007 - Custom design - 80mm x 1, 88mm x 1 & 60mm x 4

3 - LGM - OEM red on black - 80mm x1, 88mm x1 & vrs logo on black  - 55mm x4

4 - jakko27 - 2013 - black on red - 80mm x1

5 - tee - skoda motorsport - TBC

6 - KBPhoto - 2014 silver on black without silver border/ring - 40mm (domed if possible) x1

7 - Getulus - OEM wheel centres 55mm x4
8 - LukeSi - 2013 - 55mm x1
9 - mintyduck - VRS on black - 55mm x4
10 - leef69 - Retro Green on Black - 80mm x2 & 55mm x4

 

This gonna sound really daft but the price for the wheel centres is that each or the set ?

 

Price is per badge - generally they are around £5 (ish) each so £20 (ish) for a set of 4

 

I'll leave this thread open until the end of the week and then send out payment requests as i'm aware it's now been a month and movement has been slow so shall just push it through

:thumbup:

  • Like 1
Link to comment
Share on other sites

As messaged fella:

 

1 -  vRS Joe - OEM minus green - 80mm x2 & 55mm x x4 

2 - Tempra007 - Custom design - 80mm x 1, 88mm x 1 & 60mm x 4

3 - LGM - OEM red on black - 80mm x1, 88mm x1 & vrs logo on black  - 55mm x4

4 - jakko27 - 2013 - black on red - 80mm x1

5 - tee - skoda motorsport - TBC

6 - KBPhoto - 2014 silver on black without silver border/ring - 40mm (domed if possible) x1

7 - Getulus - OEM wheel centres 55mm x4
8 - LukeSi - 2013 - 55mm x1
9 - mintyduck - VRS on black - 55mm x4
10 - leef69 - Retro Green on Black - 80mm x2 & 55mm x4
11 - shooorn (Mk1 octy VRS) - Skoda motorsport front badge and all black OEM look boot badge
 
Cheers bud.
Link to comment
Share on other sites

  • 2 weeks later...

please accept my largest apologies

 

As uptake for this GB has been quite slow it, in all honesty, slipped my mind i was runnig it at all!

 

I'll put together my master sheet and will try to get confirmations and payment info to everyone lunchtime or this evening.

 

Once we have all payments in we'll go to production.

 

Sorry again for the massive delays on this one

  • Like 1
Link to comment
Share on other sites

1 -  vRS Joe - PM Sent


2 - Tempra007 - PM Sent


3 - LGM - PM Sent


4 - jakko27 - PM Sent


5 - tee - PM Sent - Awaiting size confirmation


6 - KBPhoto - PM Sent


7 - Getulus - PM Sent

8 - LukeSi - PM Sent

9 - mintyduck - PM Sent

10 - leef69 - PM Sent

11 - shooorn - PM Sent

12 - boothybass - PM Sent

13 - scottybhoy - PM Sent

14 - TrevorB33 - PM Sent - Awaiting size confirmation

15 - DannHall - PM Sent

  • Like 2
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Community Partner

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.