Twindoor boot LEDs

[monkeychild]

Hi, after some failed searching I can't find a definitive answer for which LEDs I need to replace the OEM ones in the boot.  

 

Is it this type I need? http://www.ebay.co.uk/itm/10X-White-T10-501-W5W-5050-LED-2-SMD-Car-CANBUS-Error-Free-Side-Light-Lamp-Bulb-/331548295161?var=&hash=item4d31d17ff9

 

Cheers

 

 

[Figment]

I used these :

 

http://www.ebay.co.uk/itm/2x-12-LED-smd-Canbus-T10-501-W5W-HIGH-POWER-Xenon-WHITE-5730-TWO-SIDED-SIDELIGHT-/272130893270?

 

Any CANBUS friendly W5W LEDs should work.

[Steffan]

W5W are that also what you use inside the car ? In The ceiling

[Figment]

W5W are that also what you use inside the car ? In The ceiling

 

The same bulbs are in front and rear ceiling, front and rear footwells, bottoms of the doors and the entry (puddle) lights in the bottom of the mirrors.  The one in the glovebox is a C3W  and the ones above the vanity mirrors are C5W

[Steffan]

Thanks for info :-)

[monkeychild]

After a nosey, it looks like my boot lights are a complete sealed unit??

[Gizmo]

The metal case on the lights will just pop off, use a small screwdriver on each corner of the metal case, no problem if they bend out of shape as they will straighten very easily. 

[WaveyDavey]

And these bulbs also don't need to be canbus.