Console bushes mk2 Oct vrs tfsi

[christophVRS]

I've been looking at changing my front suspension arm rear console bushes I would like to swap to s3 bushes which come pressed in the mount apart from the different bush is the mount the same as my vrs as I've read the tt one doesn't fit and you have to press the old bush out to fit tt bush in the old vrs mount

[willy0329]

I've been looking at changing my front suspension arm rear console bushes I would like to swap to s3 bushes which come pressed in the mount apart from the different bush is the mount the same as my vrs as I've read the tt one doesn't fit and you have to press the old bush out to fit tt bush in the old vrs mount

only the buses fit not the casings i bought the bushes seperate on ebay the bilstien/febi ones for £20 they are solid no voids so s3 version darkside sell them as well , the only complete units that fit are whiteline but they are well over £100 they have a bolt hole and a  bolt slot for fitment of all models.

[christophVRS]

ah ok so i will need a press to change the bushes out of original console then cheers

[brad1.8T]

Just buy the bushes separate.

 

Febi 33973  about GBP10 each