Interpretation of the error code

[johste]

Interpretation of the error code

I have a Skoda Fabia combo 2002. 1.4 petrol.

Has long had an intermittent windshield wiper problem. The wipers stop and so can not be activated in some ways. after a while they little.

Has been change wipermotor - wiper drag-and wiper contact, but the problem is still there.

 

Has been read out these errors:

 

 

Address 09: Cent. Elect. Labels: 6Qx-937-049-C.lbl

Control Module Part Number: 6Q1 937 049 C

Component and / or Version: 00 BN-SG. 1S32

Software Coding: 09226

Work Shop Code: WSC 13765

VCID: 3B75F111298209B44C4793

2 Faults Found:

 

01317 - Control Module in Instrument Cluster (J285)

49-10 - No Communications - Intermittent

01599 - Main Relay for Electric Drive (J437)

07-00 - Signal too Low

 

 

Has anyone an idea of the above problem and an interpretation of the read errors.?

 

John

[cheshire_cat]

relay?

[fabdavrav]

 

Interpretation of the error code

I have a Skoda Fabia combo 2002. 1.4 petrol.

Has long had an intermittent windshield wiper problem. The wipers stop and so can not be activated in some ways. after a while they little.

Has been change wipermotor - wiper drag-and wiper contact, but the problem is still there.

 

Has been read out these errors:

 

 

Address 09: Cent. Elect. Labels: 6Qx-937-049-C.lbl

Control Module Part Number: 6Q1 937 049 C

Component and / or Version: 00 BN-SG. 1S32

Software Coding: 09226

Work Shop Code: WSC 13765

VCID: 3B75F111298209B44C4793

2 Faults Found:

 

01317 - Control Module in Instrument Cluster (J285)

49-10 - No Communications - Intermittent

01599 - Main Relay for Electric Drive (J437)

07-00 - Signal too Low

 

 

Has anyone an idea of the above problem and an interpretation of the read errors.?

 

John

 

 

http://wiki.ross-tech.com/wiki/index.php/01317

 

01317 - Instrument Cluster (J285): No Communications

Possible Causes

• CAN-Databus Wiring/Connectors from/to Instrument Cluster (J285) faulty
• Fault(s) stored in Instrument Cluster (J285)

Possible Solutions

• Check CAN-Databus Wiring/Connectors from/to Instrument Cluster (J285)
• Check Measuring Value Blocks (MVB)
  • Usually Measuring Value Blocks (MVB) 125+ show the current Communication Status

 

I can find no reference to the others on Ross tech wiki.....