Jump to content

2.5 tdi auto gearbox oil change.


Recommended Posts

Hi. 

I need to change the oil of the automatic gearbox. Iv heard different storys that i need computer for it to monitor the temperature of the oil when filling it ? 

Is it possible to do this work in home ? do i need special tools ? does anyone have instructions for it ? iv found lots of different videos on youtube about the job but i dont want to start anything before iim 100% sure what im doing , i have changed gearbox oils before , just not for skodas and what iv heared and read about it , it made sound more difficult. 

Any advice/help is much appreciated. 

Link to comment
Share on other sites

I believe your gearbox is a ZF 5HP19 transmission.

 

This video may be helpful:

 

https://www.youtube.com/watch?v=S8jcRd4gyWc

 

And yes you do need to check the temperature but not while filling it just once it's filled then check the temperature and drain any excess off.

ohh if this is it iv overreacted i guess.

Link to comment
Share on other sites

Yes it's much simpler than on a DSG.

 

Also worth noting is you won't drain all the fluid due to the torque converter so often people will drain it again after a few hundreds miles and fill to replace more of the fluid but the choice is yours.

Link to comment
Share on other sites

okey. Thank you for all the information . 

Think its good idea to perform same thing after few hundred miles since i havent heared so far, that mixing different oils is a good thing .

Edited by propeller
Link to comment
Share on other sites

  • 2 months later...

hi. iv realised my gearbox oilpan seems to be a bit different compared what i see on the video. 

and i didnt find the filling hole on the area where they fill it up on video.

i have looked few other videos where there is also 2 hole ion bottom of the oil pan , and im pretty sure the oil is filled up from the bigger hole until it comes out?, then use all the gears for 10 secs, check the the temp , when the temp is 30-40 degress check the oil again while engine is running and gearbox on Parking, if there is oil coming out from the fill hole , let it out and if there is no oil coming out ,fill it up and secure the filling hole bolt. someone please correct if im wrong about something.

 
Here is the picture from my gearbox oil pan. 

14962326_1246385505403738_496313290_n.jp
 

Link to comment
Share on other sites

If you're going to work on these cars at this level, do yourself a big favour and spend 7euros or so on an hour's access to Skoda ERWIN.  In that time you can download all the factory service and repair manuals for your car.

https://erwin.skoda-auto.cz/

You'll get useful things like this... :)

post-78853-0-29550000-1478424283_thumb.png

post-78853-0-32750300-1478424837_thumb.png

 

There is lots of very useful info, such as all the tightening torques, etc...

 

Edited by jimbof
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Community Partner

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.