SKfab

Cheers yeah i probably will get one be interesting to see the comparison between having one and not fitted the pd150 headbolts today so one step closer to having more power just need a day to fit the turbo and get it remapped the same day

Thought I'd make a thread up of my fabia journey seeing as I have done a fair bit to it now and slowly getting to know other fabia owners so time to get to know more of you . I wont bore with a long detailed story of whats already been done as the pictures will do most the talking for me I went from owning a seat leon cupra running 270bhp 285ft/lb with launch control to the fabia vrs. I bought this car back in February 2014 with 118,500miles pretty much standard other than fk coilovers, 17" spider alloys and the roof, wing mirrors and door centres painted black. since then I have added my own touches to make it my own. my old leon the fabia when I bought it to this; Since owning I have; fitted black depo headlights changed to 16" fox 006 alloys got it remapped 168bhp 265ft/lb to try to shrink the power difference I was previously use to changed to staggard 17" xxr530 wheels 8.25j front, 9.5j rear with 205/40 stretched tyres fitted 312mm front brakes off octavia vrs fitted 6000k hid kit as the standard bulbs wernt much cop when dark and raining hard fitted a miltek turbo 2.5" back exhaust from awesome gti changed to s2000 air filter when service was due got a 51mm egr delete of a group buy on here added a bit of colour to the bay with red top silicone boost pipes to side mount went for the wide mouth front bumper look with a sticker number plate got the seat sport front mount intercooler off a forum member and bought the 57mm egr delete, and 57mm silicone hoses to go with it remapped to 185bhp 285ft/lb at cc tuning changed to the darkside hard pipe kit as I kept blowing hoses off at most inconvenient times got the door bump strips painted gloss black made a bracket and fitted omp bucket seats and harnesses uprated 666 cg motorsport singlemass flywheel clutch kit with gearbox oil change put on wind deflectors fitted acupra r splitter changed to audi tt comp wheels polybushed wishbone rear bushes fitted a flat bottom suade steering wheel and boss kit tinted the rear lights fitted aero wipers Yet to be done/plans; fitting pd150 headbolts (fitting tomorrow) fit a gtb17/60vk hybrid turbo from xman turbo's remapped yet again finish drivers vent boost gauge pod get a rear anti roll bar fit quick release bumper ties possibly lsd depending how the car drives after the remap full re-spray eventually

Are the wheels balanced properly and no buckles?

Ive got a set of these afla wheels in black had them for a few months yet to have tyres put on for my fabia. They look good in white though be interesting to see what they look like on the car in that colour

As title says can anyone tell me the size of the coupler needed to connect uprated 57-51mm 90degree bend silicone hose to the pd130 turbo as i plan to upgrade my hoses to 57mm when i fit the seat sport intercooler and got everything other than this part. Cheers

Which store? Got a number to order the bracket?after one myself only put the order in 2 days ago at tps and they said its on back order and never said when they would have them again

Pm'd

Whats your email address for paypal? Would like the vrs front grille badge

Have mine cable tied around n/s fog grille easy to remove for shows then

Inboxed you. Cheers

How much for passenger door locking module? Cheers

Please copy and paste everything from below the dotted line (including this text) Please state forum name, EGR require and engine code 1. SKFab - PD130 - ASZ with boost nipple

Does the passenger rear door locking module work ok? If so how much posted. Cheers

when I had the same problem with my mk1 leon I used 4mm butyl sealant tape, does the job and 1 roll can do all the doors