al bundy

In BC menu, you have this options, under Convenience / Doors / Unlock all.

Yes, is too old. Connections are ok.

Nooo, only 2, from PDC to Cangateway, not to xenon lamp or anything else. LE at xenon lamp control unit, behaiud centre console, what pins you use to conect PDC ?

you need to run 2 wire from PDC to gateway. At gateway, pin T20c/6 is CAN LOW and T20c/16 is CAN HIGH. AT PDC pin T16g/15 is CAN LOW and T16g/6 is CAN HIGH

E is the last version of park distance control, for version C, used between 25.05.2009 and 07.11.2010 , corect verion of gateway are : 1K0907530AD or 7N0907530 .

There is a compressor failure.

In the door.

Does or doesn't work ? Activation of cornering light: Byte 14 bit 7 check and byte 17 bit 0 check. So change byte 17 from 78 (hexa) to 79 (hexa )

You need to run a wire between T10b/2 from switch to T52aa/20 black connector from BCM.

What is part number of Bluetooth unit installed in your car ?

YEs. all octi 2 FL with fog light have cornering.

With VCDS, go to engine, login 12233, adaptation, channel 1 and modify existing value to 300.

NO, only comming home.

LH doesn't working without RLS.

And there is a control module under driver seat.