djordjebg

I need to change anti roll bar bushing because of noise they make. I have two question regarding this topic. Is there specified torque value for the screws? Do i need to lubricate bushings with rubber neutral grease?

Had same problem, right volumetric sensor was bad. In my case it didn't respond to movement in the car, you can test it that way. These sensors are cheap and are plug and play but installing them is a headache as you need to remove bunch of things. If you have Cobra alarm like me here is the link: https://www.ebay.co.uk/itm/Cobra-Car-Alarm-Sensors-Ultrasonics-Brand-New-With-Fixtures/202637727848?hash=item2f2e265868:g:N~sAAOSwPcVViwHr Older versions are black, they make grey these days.

can't be easier upload an album

Hi there, can someone attach manual for cruise control kit installation, pdf or pictures. Found some older topics not sure if it is complete. Would like to see textual part also, and guides how to activate it in VCDS. thanks in advance. Installation for ATD is different as i understand, only for 2005. cars or up to 2005.

Just to add a comment, i have resolved this issue. Bracket was broken as you can see on this picture, so it jumped all around. quick image upload Also, it is very hard to approach this part, dashboard needs to go out, and many other parts. So i will add this link here, maybe you had chance to see it, but this is one of the best diy guides on the net.

Thanks. Consulted ETKA in the meantime, yes there is plastic bracket that holds this module in place, This bracket sits in this metal dashboard support: You can see triangle holes where the bracket gets in to place. Just need to check if i need to bolt it in also, as there are holes for bolts on this metal carrier and bolts are also visible on the ETKA too.

Hi there, need help as my central convenience system got loose, it isn't locked in position and it rattles on bumps. Unit is working fine but would like to attach it. I attached picture of it, it has two holes for bolts but where are the bolts and where to screw it? upload pictures free

I noticed that i am missing air hose from can storage (above legs) to ventilation system. I have regular AC, remember that i used this feature in the past. Now i will try to find this hose but do you know where to attach it? Where is the connector on the other side.( Where to look as there are bunch of cables around.

skf https://www.ebay.co.uk/itm/1x-SKF-ANTRIEBSWELLE-GELENKWELLE-VORNE-LINKS-SEAT-CORDOBA-IBIZA-6L-BJ-02-09/291215860121?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649 spidan/ GKN https://www.ebay.co.uk/itm/DRIVE-SHAFT-FRONT-AXLE-LEFT-Spidan-24096-incl-Deposit/122760564795?epid=1543114212&hash=item1c9519903b:g:LVIAAOSwWCdZirYX huge price difference, everywhere GEnuine one is about 500 pounds that is insane... One thing is also strange, looked for inner CV joint here http://ows-cdn.tecdoc.net/gkn/home.jsp?server=4&time=20/3/2018-13:26:57#9f0a7faf39ddd73a2e22f14a94f205fa this is GKN online catalogue, but can't find Inner CV joint for Fabia 1.9sdi 2003. Only outer joint and complete shaft. but this online store has it: https://www.carparts4less.co.uk/cp4l/c/Skoda_Fabia_1.9_2003/p/car-parts/transmission-parts/car-transmission/cv-joint-kits/?657443930&1&bfc26a14c1e5dd86e1cdfd242364af78a0fac029&000095 how come?

Hi there, have problem with inner joint, vibration on gas pedal when accelerating, strange sounds sometimes. Have to further investigate but pretty sure that joint next to transmission is a problem. There are few options, to change only outer with SKF or to change drive shaft with new one. SKF is around 100 euros ( 90 pounds) while GKN is twice of that. Do you have experience, SKF is famous manufacturer but is it better choice to look for GKN ( Lobro)?

Hi there, fan speed switch of AC control unit feels loose, is it possible to remove it to check this out. It works but i think it is making little bit of rattle when it resonates. Other two switches are firm, how does it feel on your car, when you try to move it?

no

Hi there, there is a design difference between pre FL and FL model of Fabia dashboard. Not instruments but this rubber upper part of dash. Didn't have chance to use or touch fl dash, is better in any way?

That would be better but it shows incorrectly for lesser than aprox 1/2 and correctly above that. PRoblem is you never know how much left. Would be better if opposite.

Thanks for answers, first of all this my friend's car. Skoda Felicia 1.3 carburetor engine. When he loads it with fuel, gauge is reading correctly to aprox. 1/2half of the tank. At that point gauge stops, so it reads 1/2 of tank for any given value of fuel. He's been told that a problem is with a instrument cluster, not the sender in the tank. So i wanted to help as i found this item new for few euros, and it would be nice to change just this part but not complete unit. Anyhow, this isn't my car, just wanted to help my friend. Maybe they were wrong, for me it was logical to change sender from the tank. Does this problem sound familiar to you, from your experience?