DiGi

right .... but since my car is 3 years old i want to get the exact value to see how is the health of my engine ..... :chef:

i still have 5 days left of the warrenty .... i think i will Goto the dealer and :new_evil:

how can i check the earth

forgot one more thing .... when is the best time to do the test immediatly after starting the car and its cold .... or after the engine temp indecator just reach the middle or after the turbo is HOT ....

Yes thats what happens any idea

Hi guys ... i just bought a Vehicale Performance Computer, for testing car performance 0-60 mile 0-60 feet 0-1000 feet 1/8 mile 1/4 mile average and peak HP top speed at 1/4 mile so i need some information to setup the VPC first my car is 1.8T 4A octavia ... i have 7.5X16 rims fitting a 225/50/16 tyers H&R sport springs and the rest is normal what i need is 1-the frontal area 2-roll characteristics (the specific way car lean during cornering , 3 degree / G is the typical setting for most cars) 3-Pitch characteristics (the way the car tilt back during acceleration, 2 D / G typical for most cars) 4-Car wight i think 3140 pounds 5-rolling resistance 0.013 is the proper choice the manul says 6-@ which speed car shift to the second ratio @ max RPM 7-@ which speed car shift to the third ratio @ max RPM Thanks :singer:

hi guys ... i have a strange problem .... when turn on my lights they work fine if i gave a dim only the right light is giving high light .... and the other is normal ... if i switch to the high level light ... the left light is off and the right is high ..... :please:

:confused: one thing i didnt write it was in the manual .... they says ..... dont play with it ... or you may cusea fualt in the car

Found it in the manual :D :cheers: :D for ppl needs it its 1- switch off ignition and press the reset knob for the trip counter and hold 2- switch the ignition and release the reset knob , one of the service event apears in the display 3- when the desired service event is displayd turn the knob for setting the digital clock to the right "serivce --- " apears in the display 4- switch off the ignition the service event is now reset.

sorry guys u dont need any thing to rest it ... u can do it by a small trick in the dask board, and i dont want the dealer to do it becuase i can do the oil change out side why 1/4 of the price :cheers: :p once the dealer made it infront of me ... but i forgot how exactly ... its the signle aram and the reset milage botton if u got any information guys please tell Thanks

hi guys, do any one know how to reset it ????

okay ... i thing this question should be in the tuning forum... but i will ask it here, well about ECU upgrade .. i have a 1.8T model 2000 and i would like to tune it since long time but since mine is auto gearbox .... i am not sure will it be risky or not to tune it to less than 200bhp !!!:confused: :confused:

well thanks guys .... just for your information DGW the time belt here usually works for 130k~140k km due to the very high temprture here, and cuts off "acording to the dealer words" which happened with a lot of customer who they didnt know that they have to change it and they never go to the dealer after they bay the car ... unless their car is broken ....

i went to the dealer today, i told him to change the timing belt and water pump and the two tensioners, and to check that noise, which after that he discovers it is from the alternator belt tensioner, and i am end up with a new tensioner and belt too, total job will cost 380 Euro :mad: :drive1:

Not the usuall ticking sound this one is seems a problem????:confused: