spiz

30Nm for the oil sump plug

The bracket under the passenger seat can mount either the amplifier or the voltage stabiliser. If you have the amplifier then that will be under the passenger seat and the voltage stabiliser will be under the drivers seat.

Smartlink was activated on my Yeti Amundsen today using the 000 054 830A item pictured above. All good! Cheers

Gummi Pflege the seal that is in between the door and the body, not the one around the glass. I observed the same that when the glass was fully up the creaking was worse. One application cured it for a little while, the second a few days later cured it permanently. I used Einszett Gummi Pflege. Cheers

Sorry, left out the zeros after the "L"s but I think you realised that... The "B" suffix is a 17" wheel. The part number you require (M/T) appears available. From your VIN your parts person should know the exact part for your car.

Your wheels are 17"? Does your wheel show 5L601025M 8Z8 & 5L601025T FM9 on the rear? That is the part number for the FL "NEW DOLOMITE" Dolomite wheels came in both 16" and 17" versions. 5L0601025B shows as"DOLOMITE" 17" but I think different colour to yours.

That part number is a different unit and for voice activation, not app activation. Ask for a quote on the 000 054 830A. And if the price includes labour to do it. I'll check where mine came from & let you know.

Paid around 200euro last year. At the time the dealer had no idea, so bought it myself as part of a larger order of Skoda parts. (we own more than one Skoda.) For AU some Yeti versions had Smartlink activated as default, others had the activation as part of the Tech Pack. (listed as a value of $250 in the tech pack.) My service is due next month & will be asking to dealer to activate at that time. I'll report back if successful or not. Maybe wait till then for a definitive answer..... Cheers

You need the activation key which the dealer will have to activate. (& can only be used once.) I have an unused one here which I plan to have activated at the next service. :-) Pic with part number attached. This item was listed as an available option on one of the AU brochures.

Access by removing the cover from behind the low beam bulb. DRL/side light is located deep underneath the low beam section. Manual says to remove the headlight. Doesn't mean you have to if access is possible.

That shows some of the codes of what is an 8 page list that you could get from ERWIN or your dealer. 20 1T0 498 621 wheel bearing with assembly parts 4 holes 2 PR-1ZA,1ZE, 1LJ (20) 1K0 498 621 wheel bearing with assembly parts 3 holes 2 PR-1ZF Cheers

We did this recently to our Octavia (Swing ->Bolero). The Bolero was ex Yeti. It was a plug and play swap. No VCDS required. You'll require the PIN for the Bolero. Only needs to be input once. Bluetooth streaming is great! Cheers

It is a purchased module. (Your second listed.) Easier to fit this module rather than coding & warranty complications. I removed the radio trim, plastic trim that runs above the glovebox and under the switches, and also the heating controls for access to the existing wiring.

84 is correct for 185/60R15 on a Rapid. Any rating over 84 is legal.

Depends on what front brakes are fitted. Check the build code sticker near the spare tyre... 1ZA, 1ZE, 1LJ have 4 holes 1ZF has 3 holes Recommend the oem one.