S3 owners - electric tailgate / hatch closing from inside

[peterposh]

I find the E tailgate is more of a gimmick without the closing function 

[msemafor]

On 04/06/2023 at 20:39, igrozan said:

Car Skanner has an option for trunk parameters. Now everyone can set the trunk closing from the button in the cabin using the phone and obd. If I haven't tried it. You do everything at your own peril and risk

Have clicked this CarScanner function today and wanted to enable closing tailgate from interior and remote button on module 5Q0959107P [software version 0266, Superb from 2019, no kessy]. Now interior button only unlocks tailgate (its not going up like it used to earlier). But closing with remote when ignition is off works by keeping remote pressed till its closed (it hasnt earlier). Reversing module dataset from backup doesnt help.

Noticed that this function doesnt save option which user changes. Even though I clicked "Apply" and get confirmation that data was accepted it gets back to start after clicking "Refresh".

How can I now make tailgate to open by clicking interior button? Is there a possibility to reset module 6D to factory default? Or type the right coding in anywhere? There is option to include user parameters at the end of this function. Could anyone help me please? I can paste whole current  coding/parametrization of this module.

Edited 15 August, 2023 by msemafor

[igrozan]

Hello. I'll go to the garage and take a look. everything should be simple.

 

[igrozan]

And so, I don't have parameter 0266, but you can try this: my original file, as it was from the factory

 

my modified parameters

[igrozan]

post what happened

[msemafor]

8 hours ago, igrozan said:

post what happened

Thanks @igrozan for your informations.

Have no idea how I did it but now my tailgate works like it should do. Opens and closes with interior button and remote. To close it I have to keep buttons pressed till it locks.

Today morning I clicked "Long coding" --> "Tailgate/bootlid" and clicked "Reset module" and then "Hard reset". After that my tailgate started to work as I wanted it to.

Here is what I have in this feature in CarScanner and in export ECU info to text.

 

6D. Tailgate/Boot lid
Manufacturer spare part number: 5Q0959107P
Manufacturer ECU software version: 0266
System supplier identifier: 00000000000000
ECU manufacturing date (ASCII): 010101
ECU serial number: 32296305400000
VIN: -----------------
Manufacturer ECU hardware number: 5Q0959107J
System supplier ECU hardware number: A2C7376250000
System supplier ECU hardware version: 0000
System supplier ECU software number: A2C7376250000
System supplier ECU software version: 0000
Exhaust regulation or type approval number: -------
System name: HDSG-Modul
Calibration repair shop code or equipment serial number: f,Q
Calibration date (ASCII): #
ODX file id: EV_DeckLidCONTIAU736
HW ver.: H13
ASAM ver.: 001016
Application software identification (id/version/valid/plausible/used): 720A/028E/1/1/1; 720D/028E/1/1/1; 720E/028E/1/1/1; 7210/028E/1/1/1; 7211/028E/1/1/1; 7215/028E/1/1/1; 7216/028E/1/1/1; 7217/028E/1/1/1; 7218/028E/1/1/1; 7219/028E/1/1/1; 721A/028E/1/1/1; 721B/028E/1/1/1; 721D/028E/1/1/1; 721E/028E/1/1/1; 721F/028E/1/1/1; 7220/028E/1/1/1; 7221/028E/1/1/1; 7222/028E/1/1/1; 7223/028E/1/1/1; 7224/028E/1/1/1;
ECU manufacturing date (HEX): 010101
Programming date (HEX): 3551303935393130374A20
Calibration date (HEX): 230815
Long Coding: 1000

 

[igrozan]

You have version 028E, I have this parameter. It's good that everything works.

[msemafor]

14 minutes ago, igrozan said:

You have version 028E, I have this parameter. It's good that everything works.

I'm not sure about which version I have. It's shown by default when I click this option but I can change it  and after it different version will be shown by default - there is also 0285 version which might be newer software symbol. Of course I'm glad taigate works fine and as I wanted it to. Won't be playing with this anymore.

[Jesus98]

Hello.  I have 5Q0959107S, I can leave it 1B2D5BFF or better at 1B2D5B5E.  Which is better for me, I don't have a virtual pedal but I do have keyless and remote access.  Could you explain the difference to me?  It is for a superb 3v 2020

[igrozan]

17.09.2023 в 03:55, Иисус98 сказал:

Привет. У меня 5Q0959107S, я могу оставить его 1B2D5BFF или лучше 1B2D5B5E. Что для меня лучше: у меня нет виртуальной педали, но есть доступ без ключа и удаленный доступ. Не могли бы вы объяснить мне разницу? Это для превосходного 3v 2020 года.

If you don’t have any options, but you set them, it doesn’t change anything

 

 

Edited 19 September, 2023 by igrozan

[baluchap]

Hi 

I want to use Car scaner for my tailgate parametrization. I have SIII combi 12/2016 and trunk was retrofited.  Control module 6D is 5Q0959107G  H12    0250.

1.  which odb I can buy  - any advise  ?  Plan is to use car scanner and odb to change parameters  like @igrozan mentioned

2. any other option how  to activate center console button open/close  and key close? 

[baluchap]

2 hours ago, baluchap said:

obd

 

[baluchap]

@msemafor

HI 

Are you able to help me pls.  I retrofitted deck lid  to my SIII COMBI   from 12/2016.   Control module is version G, details  below.  I want to  activate closing lid by key. Now its only open it.  Without  KESSY. 

I am not able to  do parametrization - because by ODB and CAR SCANNER  I have no options for it - or I can not find them between all the options in menu.

Any help ? 

 

6D. Tailgate/Boot lid
Manufacturer spare part number: 5Q0959107G
Manufacturer ECU software version: 0250
System supplier identifier: 00000000000000
ECU manufacturing date (ASCII): 010101
ECU serial number: 30237749000000
VIN: -----------------
Manufacturer ECU hardware number: 5Q0959107G
System supplier ECU hardware number: A2C7376250000
System supplier ECU hardware version: 0000
System supplier ECU software number: A2C7376250000
System supplier ECU software version: 0000
Exhaust regulation or type approval number: -------
System name: HDSG-Modul
Repair shop code or tester serial number: 000000000000
Calibration repair shop code or equipment serial number: 09
Calibration date (ASCII): $
ODX file id: EV_DeckLidCONTIAU736
HW ver.: H12
ASAM ver.: 001011
Application software identification (id/version/valid/plausible/used): 720A/00C2/1/1/1; 720D/00C2/1/1/1; 720E/00C2/1/1/1; 7210/00C2/1/1/1; 7211/00C2/1/1/1; 7215/00C2/1/1/1; 7216/00C2/1/1/1; 7217/00C2/1/1/1; 7218/00C2/1/1/1; 7219/00C2/1/1/1; 721A/00C2/1/1/1; 721B/00C2/1/1/1; 721D/00C2/1/1/1; 721E/00C2/1/1/1; 721F/00C2/1/1/1; 7220/00C2/1/1/1; 7221/00C2/1/1/1; 7222/00C2/1/1/1; 7223/00C2/1/1/1; 7224/00C2/1/1/1;
ECU manufacturing date (HEX): 010101
Programming date (HEX): 3551303935393130374720
Calibration date (HEX): 240313
Long Coding: 0D80

 

 

 

[msemafor]

59 minutes ago, baluchap said:

@msemafor

HI 

Are you able to help me pls.  I retrofitted deck lid  to my SIII COMBI   from 12/2016.   Control module is version G, details  below.  I want to  activate closing lid by key. Now its only open it.  Without  KESSY. 

I am not able to  do parametrization - because by ODB and CAR SCANNER  I have no options for it - or I can not find them between all the options in menu.

Any help ? 

 

6D. Tailgate/Boot lid
Manufacturer spare part number: 5Q0959107G
Manufacturer ECU software version: 0250
System supplier identifier: 00000000000000
ECU manufacturing date (ASCII): 010101
ECU serial number: 30237749000000
VIN: -----------------
Manufacturer ECU hardware number: 5Q0959107G
System supplier ECU hardware number: A2C7376250000
System supplier ECU hardware version: 0000
System supplier ECU software number: A2C7376250000
System supplier ECU software version: 0000
Exhaust regulation or type approval number: -------
System name: HDSG-Modul
Repair shop code or tester serial number: 000000000000
Calibration repair shop code or equipment serial number: 09
Calibration date (ASCII): $
ODX file id: EV_DeckLidCONTIAU736
HW ver.: H12
ASAM ver.: 001011
Application software identification (id/version/valid/plausible/used): 720A/00C2/1/1/1; 720D/00C2/1/1/1; 720E/00C2/1/1/1; 7210/00C2/1/1/1; 7211/00C2/1/1/1; 7215/00C2/1/1/1; 7216/00C2/1/1/1; 7217/00C2/1/1/1; 7218/00C2/1/1/1; 7219/00C2/1/1/1; 721A/00C2/1/1/1; 721B/00C2/1/1/1; 721D/00C2/1/1/1; 721E/00C2/1/1/1; 721F/00C2/1/1/1; 7220/00C2/1/1/1; 7221/00C2/1/1/1; 7222/00C2/1/1/1; 7223/00C2/1/1/1; 7224/00C2/1/1/1;
ECU manufacturing date (HEX): 010101
Programming date (HEX): 3551303935393130374720
Calibration date (HEX): 240313
Long Coding: 0D80

 

 

 

My app is in polish so I'm not sure what names of functionalities are in english version but will try to translate.

After connecting to your car you need to choose the last icon at the bottom of the main screen called "Coding and service" or similar. Then confirm the warning and you'll see categories. There should be "Boot lid" or "Trunk" or similar. Enter there and the last option is "Tailgate dataset customization". Guess it is what you're looking for.

I needed to do a reset of this module after changing parametrization.

Remember that you're doing this on your own resposibility.