Make your Superb superb

[HughGabriel]

Firstly a correction to my previous post - module 3 not module 9 is ABS!

 

From my auto scan on a 64 plate superb estate 2.0tdi 140 dsg which accepted the change.

 

Address 03: ABS Brakes (J104)       Labels:. 1K0-907-379-60EC1F.clb

   Part No SW: 1K0 907 379 BM    HW: 1K0 907 379 BM

   Component: ESP MK60EC1   H46 0164  

   Revision: 00H46001    

   Coding: 863D6016092400FB611206E890220092A1080021

   Shop #: WSC 33361 790 00060

   VCID: 7EF3B297E982EEB6F8-802A

 

No fault code found.

 

 

I have a 2011 Golf which also accepted the change, component on that is MK60EC1 H31 0108 revision 00H31001.

 

Hopefully that some help.  Someone on here there is a list of which ABS modules will allow which adaptations/have what capability.

[Cotswold]

I just turned mine on and I have the 'BM' version of the module, same as HughGrabriel.

 

Success!

Byte 16 bit 0 set, now I have Hill Hold Control. Great on the steep hills in stop start traffic.

[mucden]

On 1/29/2018 at 14:07, HughGabriel said:

Hopefully that some help.  Someone on here there is a list of which ABS modules will allow which adaptations/have what capability.

 

Here's a list:

http://forum.golf6.pl/warsztat/vcds-aktywacja-hill-hold-control-hhc-t250.html

 

1K0 907 379 BM has HHC support.

[Shaunieboy]

On 23/05/2017 at 21:28, kevberlin said:

The very same wheel/tyre combination as on my 2013 FL Superb Greenline SE. They are excellent in my opinion for many practical reasons.

Yep agreed, I have the same car as you but in 'S' trim. I don't think I could get away with the ride with thinner tyres/bigger wheels. 205/55 all the way (and save you a fortune!)

[Shaunieboy]

Just a quick update in case this is of use to anyone thinking of enabling Hill Hold and/or XDS.

 

My module is 1K0 907 379 BL and I had absolutely no issue enabling both on VCDS. Hill Hold is absolutely brilliant