Jump to content

David's Fabia Saloon (The Daily)


Hyphons

Recommended Posts

Something not mentioned in the first post, is the headlights which were given a quick wet sanding and polish as they looked a little hazy, the bulbs were also quickly upgraded to some Osram night breaker full beams, Phillips X-treme vision low beams and some osram warm white led sidelights which all in give a nice clean look as I didn't want some stupidly over bright sidelights overpowering the low and high beams, gives a pleasant oem look to them but with a nice and clear light output 

 

Before - 

 

IMG_20171216_112745.thumb.jpg.db34d4cca2138b079c9f38d9da66b38c.jpg

 

After - 

 

IMG_20171216_115114.thumb.jpg.07f78b8a81c078576beddd7c97d46820.jpg

Link to comment
Share on other sites

  • 4 weeks later...
7 hours ago, Trilly said:

Im in the same club. Fabia saloon.  Any mods  planned??

 

Just some upgrades more than anything, plan to keep it standard for now and run it as a daily, already have a few parts to fit, cruise control and some electric mirrors with the door loom rocked up in the post this week, the coolant needs an overhaul to so I have a new bottle, outlet pipe and temp sensor to fit, that's about all for now

Link to comment
Share on other sites

  • 3 weeks later...
  • 1 month later...

A quick update, I had a day off today so decided to spend time diagnosing the reason for why the boot didn't always want to open. 

 

I think all I need to say is it was a miracle the boot was even opening in the first place :D after a quick fiddle around, I went to check the wiring for the boot latch (I was hoping that maybe it was something simple). After gaining access, I found the plug hanging down like this.. 

 

IMG_20180411_121837.thumb.jpg.c34d1f00a74a6fff53ae9beb65b2fbce.jpg

 

Electrical tape gave the game away that I had found the problem, I removed the tape to see the worst wiring job I think I have come across, I think I child could have done better

 

IMG-20180411-WA0007.thumb.jpeg.a5ac25276cc3b7f30f1f7547fe96d621.jpeg

 

One wire wasn't even connected and the other wasn't connected to the right wire, so I have no clue as to how the boot was working, I'm not an electrician but even I could do a better job at that.

 

Plan now is to, at some point, strip back the wire a bit more, recouple all the wires correctly and see if this fixes it, I had attempted to twist and tape back together correctly just as a temp measure, but ran out of tape. 

Edited by Hyphons
Link to comment
Share on other sites

Well this took way longer than expected :D boot is now somewhat working again, although the latch might be buggered as its temperamental so I'll be buying another one, the whole wiring loom to the boot ended up coming out for repair as I noticed more electrical tape that I hadn't previously spotted

 

IMG_20180415_111552.thumb.jpg.1468ed8103251b8f8e91d8fd57f71e13.jpg

 

As you can see the ground wire had come apart completely and all the others are wrapped in electrical tape, the wire for the numberplate lights had fortunately been soldered and heat wrapped at a previous point in its life and only 2 of the wires were damaged with 1 completely split in 2, all the rest were okay so there was no need for the electrical tape on all the wires

Link to comment
Share on other sites

  • 2 weeks later...

Update, boot latch may not be buggered as has been spot on since I replaced the fuse to the interior light. 

 

The drop links need replacing at some point as they're on the way out but on a positive note, I ordered the wrong boot floor (but hey, it still fits so who cares) and replaced the disgusting old one that was falling to bits.. 

 

Out with the old

 

IMG_20180428_184308.thumb.jpg.5ae5a43b60d1688c614728634caecfd8.jpg

IMG_20180428_184324.thumb.jpg.f47bac50463561bf8c23f47a6b36dfa3.jpg

 

In with the new.. 

 

IMG_20180428_184047.thumb.jpg.c735c905ce1a83439e317895ad2c4179.jpg

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...
Just now, retro said:

Got a link to the bulbs you bought? Looks really good.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F351581367261

 

These have lasted in the Citigo now for the last 3, 4 years, cheap but good quality

  • Thanks 1
Link to comment
Share on other sites

3 minutes ago, retro said:

Got a link to the bulbs you bought? Looks really good.

Forgot to add the number plate bulbs, bit of a gamble onto if they'll last as they're super duper cheap, but I hate having overly ridiculous bright number plate bulbs so it's trying to find a bulb that's sort of in the 4000k bracket. 

 

https://www.amazon.co.uk/dp/B01CVYH7ZI/ref=cm_sw_r_cp_apa_i_1kicBbM5XJ17D

Link to comment
Share on other sites

1 minute ago, Hyphons said:

Forgot to add the number plate bulbs, bit of a gamble onto if they'll last as they're super duper cheap, but I hate having overly ridiculous bright number plate bulbs so it's trying to find a bulb that's sort of in the 4000k bracket. 

 

https://www.amazon.co.uk/dp/B01CVYH7ZI/ref=cm_sw_r_cp_apa_i_1kicBbM5XJ17D

Thanks for the links, the number plate ones look like some we have in stock at work so I may have to borrow a pair for quality control.

  • Like 1
Link to comment
Share on other sites

11 minutes ago, retro said:

Thanks for the links, the number plate ones look like some we have in stock at work so I may have to borrow a pair for quality control.

Excellent, assuming it's a Fabia as well? It's a 39mm bulb, just be careful fitting :D it was a bit of a squeeze back in and I managed to somehow slice my finger open 

Link to comment
Share on other sites

Went ahead and picked up some bits from Nottingham today.. 

 

IMG_20180526_192707.thumb.jpg.fbec10b355bbf94aef1d9fed6a537f94.jpg

 

My next problem with the Fabia is working out why it's burning oil, it could be head gasket, but not smoking, or the piston rings which I've read up is common for the 1.4, I've put about 2 and half litres of oil in since buying, I've also seen the breather pipe getting clogged with oil could be a further cause for oil consumption, any ideas are welcome, hopefully not a major issue

Link to comment
Share on other sites

Another job off the list, seats fitted from the Fabia Sport bringing a bit of life back into the interior

 

Old and worn drivers seat

 

IMG_20180528_143900.thumb.jpg.3d6186efce7ebfd5c917c101fad947a1.jpg

 

New and fresh drivers seat (it looks like it's got a hole, but it's just the light) 

 

IMG_20180528_154250.thumb.jpg.8b26835ac71018d8200f19c575485fdc.jpg

 

No real before picture of back seats, I just wanted to get this job done as I was sweating buckets :D the old seats were a 1 piece and the new seats are a split, lucky for me, Skoda knew their stuff and mounting points were already there for the split seats

 

IMG_20180528_183203.thumb.jpg.1c7620d050f4b9e0ea4fce05ee0b1644.jpg

 

  • Like 2
Link to comment
Share on other sites

I also replaced the door cards with some more s****ier ones (which would have been in the post above, but of course 20mb upload limit), more so because the drivers side rear had been attacked by a cat and the passenger front was falling apart thanks to whoever fitted the window regulator not having a foggy how to take the trims off.. 

 

Out with the old

 

IMG_20180528_181113.thumb.jpg.af22738b6e8e650b7a88b31a0235ca1e.jpg

 

In with the new

 

IMG_20180528_181115.thumb.jpg.9e6ae2385bc5f9c613ef3d6a75bdbbd8.jpg

 

I realise these have some staining on, but stains are easier to remove than scratches.. 

 

Thanks to the chap I bought these off, I was also able to replace the passenger window switch with a less broken one

 

Screenshot_2018-05-28-20-13-50.thumb.png.6ec598fd2dd5dc725b207868432a29f9.png

 

Edit - apparently sw4nky is now a swear word :D

Edited by Hyphons
Link to comment
Share on other sites

Last post (this bloody 20mb upload limit!) much to my confusion, discovered 2 additional plugs on the drivers side door, which the bigger of the 2 is I believe for electric mirrors and the smaller of the 2 I know for certain is for the door card light (my car had just 2 reflectors in the front), the new door trims came with the door card lights so I was able to plug it straight up, but yet to see if it works as I didn't have a bulb spare lying around, I would need new ones anyway as both clips are damaged so they don't secure correctly

 

Exhibit A. 

 

IMG_20180528_163422.thumb.jpg.3836a067708db3e4c76dc6647ebb95b3.jpg

 

Exhibit B. 

 

IMG_20180528_163425.thumb.jpg.1f3e3d55841d1f98386bb5ad25a4577d.jpg

 

Here's what came as standard

 

IMG_20180528_164159.thumb.jpg.620deb434372050f44f6d670cf932261.jpg

 

And how it will end up looking (sort of) 

 

IMG_20180528_164237.thumb.jpg.dcc5e39f95131d0ec8b9b4234d35ca81.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Community Partner

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.