Ben99Felicia

Sorry I didn't see this message until now. The car sold today

https://www.briskoda.net/forums/topic/530561-mk1-octavia-vrs-hatch-yellow/ In the for sale section with 12months MOT

Make & Model: Mk1 Octavia VRS hatchback Colour: Yellow Mileage: 93,726 Price: £2000 Description: 5 former keeps, owned by me since Jan '22, Just passed an MOT this morning 20/02/25 with one advisory for anti roll bar drop link ball joint play, 2 new Febi drop links purchased and will be fitted before the new owner collects. The car is generally pretty good for its age with lots of new parts and work being done in my ownership. See my build thread on the forum covering most things i've done, although the thread hasn't been updated for a while and quite a bit of work has been done since then, including replacement gearbox and new clutch/flywheel kit. If anything lets the car down its the body/paint, theres a small dent in the drivers door and some small rust scabs on the bottom of the front arches, one on the bonnet near the grill, one on the drivers sill and some on the top of the door under the trim, the usual flattening has happened to the sills from people jacking. The car isn't perfect but It has a lot going for it and could be made nicer still Condition: Fair for age/milage Service History/Receipts/Recent Service work: I've never been great at keeping paperwork in a folder but If you look at the forum thread it shows you how well the car has been cared for https://www.briskoda.net/forums/topic/501520-bens-yellow-mk1-vrs/ Mods: Mapped to aproximately 230bhp, Full miltek exhaust with sports cat 3" downpipe and resonated 2.5" cat back, Airtek front mount intercooler all black including the pipework and intercooler itself, Oversized creation motorsport intake with 3" maf sensor, Ramair induction kit, APS 265lph fuel pump, Bilstein b6 standard ride height shock absorbers, polly bushed frount wishbones and anti roll bar, Pioneer headless bluetooth stereo with built in phone holder, Goodyear Eagle f1 asymetric 6 tyres, braided front brake hoses Collection: I in Burntwood Staffordshire, WS7 Pictures:

Give me a week or so to get the car put back together and get a fresh MOT then I'll be in a better position to sell. I got the clutch and gearbox on yesterday but I've got everything else still to fit and my youngest started to come out with chicken pox yesterday so that'll be a fun week 😔 Anyway I need a bit of time or else I'm going to get stressed out

Bit of a sad update, I'm looking to sell the car, a diff rivet broke off and destroyed the gearbox and it's been off the road since the last week of August. I'm hoping to have the replacement gearbox fitted this weekend and then I'm going to move it on. I planned on keeping the car and doing more work to it but things have changed and I have other priorities. I would like someone on briskoda to buy it and I hopefully someone like me can enjoy it. It's going to need some cleaning up and bits and pieces doing to it and I'll need to get a fresh MOT as it ran out last week I think I'm asking for £2000

Never mind, I've actually bought an over sized tip and induction kit. I might get round to posting about it over the weekend 👍

I noticed when I changed the shock absorbers that one of the front brake hoses was split I bought a set of braided hoses to replace them all, I've only changed the fronts so far because they are a pain to take apart with damaging the hard lines. I broke the passenger side one and had to make a new pipe, I'm glad it wasn't the drivers side because it would be a nightmare to replace I've also got a second hand full Mitlek system 3" sports cat 2.5" resonated cat back after a bit of cleaning and welding it was ready to fit. As you can see the downpipe is a lot bigger than the standard one Ive done a data log and I estimate 20+ftlb of torque and 10+hp, it certainly made boost for longer and the graphs make it look like 30ftlb and 30hp but I can't see it being that much and I'd prefer to be realistic about it, only a dyno could really say I wonder what difference an oversized turbo intake pipe, 80mm maf and big cone filter would make? I also poly bushed the front control arms but forgot to take any pictures, just had a pair of new eagle f1s on the front and the tracking done too If anyone has any intake parts they want to sell let me know

Car season is here again yay Got some bilstein b6 shocks fitted today The old shocks don't feel like they were doing much, I've not quite finished fitting the new ones yet so I have test driven it but I bet it's a big difference

Cheers mate, I'm glad it might be some use to you. There's always something to fix on these so you'll be practicing those skills before long. I need to sort a few new and reoccurring problems now but it's finding the time

I had to trim the new turbo outlet pipe by 40mm each end, duct tape happens to be the correct width I cut down the original dump valve hose and managed to get it back on the dump valve and new intercooler pipe by swearing at it and using boiling water to heat it up On the hot side I had to flip both of the horns by taking them off their brackets and remounting them upside down Finally I had it all put together, this section took the longest to work out, its very tight in there now and I'll reroot some of it at a later date to make it easier to work on Pretty sucessfull weekend, of course of knocked all of my knuckles off but thats a small price to pay

Airtec intercooler install The intercooler is installed and the results are really good. I'll start by showing the before and after data logs because aside from the kit looking smart it really is all about the performance after all. This is the air intake temperature with the original side mount intercooler. Starting at 18°C it steadily rises to 49°C by the end of the pull, an increase of 31°C. This is the log from today with the new front mount. I'm suprised that the intake temp actual went down from 17.2°C by 1.5°C to15.8°C from the start of the pull and didn't show any rise until after 5000rpm where it reach a maximum of 18.8°C a total rise of only 1.6°C The result in these lower temperatures are also evident in the timing logs. This graph shows the timing pull on each cylinder during the high intake temperatures, the ECU is pulling 3° from the base timing because it is detecting knock, this is reducing the power that the engine makes. With the new intercooler the ECU isn't detecting any knock 🙂 Here are some pictures I took during fitting the kit. I had to trim the crash bar for the intercooler brackets and the plastic cowling at the bottom The pipe work on the cold side was very easy to fit I has to trim the corner of the air vent on each side of the bumper to clear the intercooler bracket I shaved part of the turbo intake pipe to clear the new turbo outlet pipe

I can find the koni str.t for about £500 and the KW v1 seem to be about £1000. In between there's the koni sport for about £800 and bilstein b8 for about £900. I guess if I buy spring and damper kits I would need too mount bushes and bearings for about £100, I think the KW come complete but not sure. I don't know what to do, I'm not sure how to decide

That sounds ideal, which bilsteins are they and what make of spring? The bilsteins are looking expensive but I guess you get what you pay for. Koni look a bit cheaper but I want to be happy with what I buy and I'm not sure if the koni str.t kit will be any good as it's quite cheap compared to bilstein kit I'd be happy with something sporty but not hard or crashy, I've got a mini cooper s r56 with the factory option sports suspension and it's ok but I'd prefer a bit more give. It came with runs flats and was terrible over any sort of damaged tarmac but I can go over stuff without cringing to much now I've got rid of the run flats.

That's good to know because I've ordered one already. The other one I was tempted by is similar to the forge dual pass from Gravity performance, it looks good for the money at £250. The airtec is probably overkill for stage 1 but it shouldn't ever need upgrading. The way it fits so neatly had me sold more than anything. I'm looking at suspension upgrades now if anyone has any recommendations. I've been looking at koni and bilstein, I don't think I want coilovers but might be persuaded.

I bought the APS 265lph from jjc race and rally on ebay. I paid £63.14 at the time which is a bargain, the price has gone up to £88.15 now. Demon Tweeks sell it for £84.50, for some reason the website say its not compactible with my car though, there are 2 versions one for 2wd and 4wd cars. My car is standard apart from a cat back exhaust so it was only ever going to make around 210bhp, he told me a front mount intercooler, sports cat and some bigger injectors (injector duty cycle was getting pretty high) should get me to around 240bhp. I've been looking at the airtec front mount designed to fit the mk4 golf, I wonder if anyone has one fitted to an octavia https://www.airtecmotorsport.com/product/airtec-front-mount-intercooler-for-vw-golf-1-8t/