Sure you can disable it -- by opening the door...:-)

I'm not aware of any other way. This "feature" exists so that if the car is unlocked unintentionally, perhaps as you put the key in your pocket, or by someone else's remote which happens to have rolled to the same code as yours, it will lock again if none of the doors have been opened, rather than sitting there unlocked for all eternity.

-Uwe-

Sure, but there is a reason that i do not like this, that is that the passengers door is faulty (i suppose a switch) that sends the signal of an opened door, so if i open the passengers door and leave the keys in the car, it will auto close the doors:(

Hello, can i disable the autolocking feature after 30 seconds from the time you press the open key in fob? I do not mean the antihijack but the one that when you unlock the car and do not open any door within 30 seconds the car autolocks.

Thanks

I did not think VAG com recognised Octavia 1 HU's anyway.

vagcom recognises Octavia I HU's but to do that it is necessary to be a connection of the k-wire to the k-pin of the HU. But i don't know which cable is the K-line. May be i could grab it from the climatronic :confused: If someone can help it is apriciated.

Thank you

what does vagcom do to your aftermarket nav?

It's not aftermarket, it is the Skoda Navigation DX

Hello friends,

I have a navi Installed to my skoda octavia I (1U). The problem is that in the wiring loom that goes to navi there is not the k-wire. Without this wire is impossible to access the navi (or symphony HU) with vag-com.

Can anyone knows from where can i grab the k-wire to put it behind the navi ?

Which cable is it?

Thank you in advance.

Hello,

I want to reset the factory HU Skoda Symphony. The electrician who put my aftermarket radio at the past, removed the k-wire from the pinout 3 from the connector III as seen at http://www.packetradio.co.uk/Cars/octavia/radio.htm

Now, after the reset of my old HU I do not know which cable of the bundle I have to put the pin 3.

(The HU is completely functional now, but I want to

Pitty..there is no any unplugged wire and I don

There is now wiring at position 3 (k line) at the adaptor!! Now, which cable i have to put there? Which one it the corrrespondig cable that i have to fit to position 3 at the adaptor?

If an aftermarket radio has been fitted at some stage the installer may have disconnected the K line from the radio plug to avoid the radio problems with the scanning tools.

Check that K line connector is intact to the radio.

Dougal

Yes, an aftermarket Radio had been previously installed but I don

The problem is that although the car has this control module installed (I mean the skoda audio symphony), it is not working neither in autoscan nor in manual selection.

I imagine that this is because the car hadn

Hello friends,

Can anyone tell me why vag-com software does not recognize my sound system (radio system 56) controller at all? My car is oct 1,6 with a secondhand symphony audio system from an octy RS. The HU works properly, but I want to make some corrections with vag-com.

Thank you for your help

Hello, My name is Tasos i'm from Greece and i'm owner of a SkodaOctavia Rider 1.6