kentphil1
Resident Member
-
Joined
-
Last visited
Solutions
-
kentphil1's post in which compression cylinder tool? was marked as the answerSomething like this should do you ok - https://www.machinemart.co.uk/p/040814101/
Whilst the hex size is 16mm, the actual thread diameter is 14mm, with a 19mm reach, see here for info - http://www.sparkplugs.co.uk/ngk-spark-plug-pfr6q click the additional info tab.
-
kentphil1's post in Lower ball joints, OE only or any good recommended aftermarket brands? was marked as the answerI use the Lemforder ones from ECP, and they have been good quality so far. I believe Lemforder make for OEM as well.
-
kentphil1's post in Rear Parking Sensors - Not Working was marked as the answerThis is the instructions for a wiring dedicated kit for the octavia that you will see can be programmed for towbar and pdc, https://www.westfalia-automotive.com/fileadmin/pdf/e_anlagen/317/e317015391101-01.pdf it should detail the actual module and coding. I think it is module 76, control code to 1, but don't quote me on that, it was nearly 4 years ago that I fitted mine
-
kentphil1's post in No dip beam was marked as the answerSpray some contact cleaner into the switch and give it a good wiggle workout, cures about 6/10 of the switch faults, not much to lose.
-
kentphil1's post in Scuttle Panel Removal was marked as the answerHere you go -
No sound I'm afraid, but fairly self explanatory
-
kentphil1's post in How do I clean an oily ignition coil? was marked as the answerTwisted kitchen towel soaked in IPA or carb cleaner. Once you get it down the tube, use a long screwdriver to move it round if that makes sense.
-
kentphil1's post in Error code p0130 low mpg was marked as the answerAccording to Ross Tech either you have a wiring fault, or more likely, a fubar front lambda sensor - for info - http://wiki.ross-tech.com/wiki/index.php/16514/P0130/000304