replacing hand  brake cables

do i have to put cable through the metal tubing on my old ones

as i follow the way i took it off and it looks to long when adjusting

 

best regards brummiered 

Push it through the metal tubing that goes to the handbrake leaver then follow the route the old ones take making sure to do all the clips up then attach it to the rear calipers.

how do i get old cable out of tubing

Pull?

Yh undo it from the handbrake and pull it from underneath.

got cable loose from pipe but theres like a little washer or something in pipe stopping cable coming all the way out

done i have to saw pipe or something else

got cable loose from pipe but theres a washer or something stopping cable coming all the way out

do i saw it above washer  or something else

I read something about someone having to drill it? Apparently there a birch to get out

I had no issues what so ever. They came out very easy. I did also read something about someone drilling. Can u not just cut the old cable out?

thx for all your help

done it now

How did u sort it. Just for others if they get the same issue

i sawed about 1inch off pipe at the end with the birch

     engine still not running   put new cam sensor and crank sensor and new plugs and sleeves but not getting a spark

7 hours ago, brummiered said:

     engine still not running   put new cam sensor and crank sensor and new plugs and sleeves but not getting a spark

Wrong thread?