ricardo_smooth

Got them on mine and they handle great. then again my rear shock had collapsed lol. I'm still happy with them though

gone

Brand new Sachs set....swap for something, not sure what. Try me lol

v rated is high enough for fabias

done

pics?

you've not sealed it properly and cleared the drain holes too. Fact :)

have you got the boot lid gas struts? mine died yesterday!

could be the ARB itself needs replacing if it's an older one with plastic collars for the bushings. Had it myself and had to replace the ARB with a newer one with metal collars to stop the inner bushes moving

nothing unless you can bleed it yourself again?

It was only a light roughing up. I agree more aggressive, but by no means overboard. Same job effectively

FYI I did this yesterday as in the 6 years of ownership, the one touch hasn't worked on the passenger window from the drivers control, I used a standard pot scourer pad to roug up the brass contacts lightly and cleaned the rubber pad with some 'elbow grease' multipurpose household degreaser. I dried off the ruber pad and reassembled and all worked well, so no need to buy anything you haven't got in your house already. I did it this way knowing that I might kill it completely for the purposes of research

I changed mine about 3 weeks ago, radiator from euro car parts was very cheap for a new one

Changing a rad is not a 5 minute job fyi. It's not hard, but time consuming!

Pm pics of the bonnet inc grille. Im in sheffield so could pick up