The its a skoda honest stickers work out at £3 posted. Let me know asap as ill put the order in

Cheers

Let me know what colours etc youd like as im sure i could get them in most

Ps Briskoda will not be responsible for anything that goes wrong _ it wont though!

I've been a long time lurker here on Briskoda, learning loads of useful info for my various Skoda's but never really contributing much.

I'm running a group buy on another forum and thought that members of Briskoda could definitely benefit, So I'd like to offer it here too:

The deal:

Minimum 20% off Stage 1 remaps at 2 selected Revo Dealers.
If we can get good numbers at each dealer, we could get upto an extra 15% off - these numbers are yet to be detailed
Anyone with a 2005> VAG car can participate but,
Everyone taking part in the deal must be on this post, and booked in with a deposit taken at the dealers before the event.
All remaps are to be done on the day. (dates TBC)
Discount is on stage 1 remaps only. For the next stage, you just have to pay the difference between stage 1 and the one you require. This is at normal rates*

30 day money back if you're not satisfied

Locations:

2 Sites are going to take part in the deal. They are ADS Preston and QuattroTech in st, Ives Cambridgeshire
Both Sites are well respected VAG group specialists 

I've personally dealt with both over the last couple of years and found them to be both knowledgeable and professional, but above all - helpful.

Dates are to be agreed when we have numbers back.

But its most likely to be end of October, beginning of November

ADS Preston: http://www.ads-automotive.co.uk/

Quattrotech St Ives: http://www.quattro-tech.co.uk/

Pricing and Power gains:

Some example pricing and gains:

Octavia MKIII VRS diesel £399 + vat = Max cost £383.04 - Min cost £311.22 approx gains 35bhp
Octavia MKIII VRS petrol £599 + vat = Max cost £575.04 - Min cost £467.22 approx gains 100bhp
Octavia MKII VRS petrol £399 + vat = Max cost £383.04 - Min cost £311.22 approx gains 50bhp

Octavia MKII VRS diesel £399 + vat = Max cost £383.04 - Min cost £311.22 approx gains 30bhp
Yeti 1.6D 105bhp £399 + Vat = Max cost £383.04 - Min cost £311.22 approx gains 25bhp
Fabia Vrs 1.4 £399 + Vat = Max cost £383.04 - Min cost £311.22 approx gains 30bhp

These are examples only, please check the Revo website for your actual vehicle price/bhp change: http://www.revotechnik.com/#

* check the Revo website for stage 1 to 2 differences. e.g Stage 1-2 on the Octavia VRS II pertol is £50 + vat

So, still interested?

Post on and lets gets some numbers up and deals done!
If anyone is interested in Exhaust systems then let me know too and I'll see what can be done as both ADS and QT as Milltek dealers too.

Please do not contact any other Revo Dealers: they are not included in this offer and will be unable to participate or offer the discount.

** Please note, this deal is in no way affiliated with Briskoda. Briskoda bears no responsibility for any wrong doing that may occur**

During my time away the requests have stacked up so makes sense to buk them all together and let everyone benefit from the reduction in price.

Running in the same format as all the previous Group Buys from yesteryear the badges are a flexible self-adhesive backed vinyl printed with the chosen design and finished with a clear resin dome to give a pronounced finish and protection and durability.
They work equally well stuck over the OEM badge or in place of them.
They can also be shrunk down and used as alloy wheel or steering wheel centres too.

Pretty much anything goes - solid flat colours to a coloured vinyl are the best finish but full colour designs can be printed to white vinyl. 
The choice really is yours however a few for inspiration (and if you want any of these designs try to quote what i call them and your colour choice)

Retro

Retro in Lime Green & Black

Autobot Steering whel centre 

also in lime and black

Skoda Motosport

Custom Full colour designs
(I'd need you to supply "print ready" artwork for something this complex!)

OEM Badge minus the green

My version of the new latest badge

Which can be done in whatever colour/colours one fancies

old VRS logo on black background used on alloy centres


 

Here is a link to the photobucket album where i have dumped most badge artworks and images

feel free to browse and let it guide your thoughts

the images should be named just try to use that as what you put on the list 

PastyBadge Design Gallery

However don't feel limited by this collection, and not everything i have produced is in there.

Everything is produced to order so you can be unique or have a badge shown in a different colour combo if required.

If you're interested start a list in the normal Group Buy fashion along with the sizing you want.

Pasty Boy - Retro - Silver on Black - 80mm x2

I've done most cars now but it is your responsibility to make sure you request the correct sizing!

As a very rough guide off the top of my head:

Fabia & Octy mk1 - 80mm bonnet and boot - 55mm alloy centres
Fabia & Octy mk2 - 80mm boot & 88mm bonnet - 55mm alloy centres
Superb mk1 - 88mm bonnet & 92mm boot
Superb mk2 - 90mm bonnet and boot

If in doubt.... get a ruler out!!

As a guide larger badges are about £10-12 and the alloy centres around £6-7 when produced on their own but normally come down to around £6.50 and £4 respectively.

Things like extra colours in the design, larger size, international shipping add to the cost but once the quantity is up to a sizeable amount I will discuss with the printer and sort out pricing and everyone will then get a PM to confirm their requirements, the costs there of, delivery details and payment details.

Once the quantity gets up to enough to warrant the maximum discount (generally around 100 badges) I shall contact everyone via PM to confirm design, sizing and cost; and to request payment.

Once all payments are in I shall hit the button! 

Generally these things take a month to go down and then a couple of weeks to be produced and posted

Any questions ask away 

PastyBoy

Looking to get one of these for my Fabia

After contacting  Brian at  Jabbasport a minimum of 6 in a group buy would be needed for them to be produced, would anybody be interested in one?

I have Another chap Called Dean Lock already interested in one so we need 4 more people.

Price is £229.00 plus postage.

A deposit of £69 per ARB is required to be paid to Jabbasport before this goes ahead

I will leave this open until 30th April to see what interest if any i get.

This is not an offical BRISKODA organised buy and therefore BRISKODA CANNOT be held responsible for any wrong doing that may occur.

https://shop.jabbasport.com/products/jabbasport-rear-arb-fabia-vrs

------------------------------------

THIS ARB IS NOW ONLY AVAILABLE VIA GROUP BUYS OF 6 OR MORE, EMAIL US FOR MORE INFO IF INTERESTED.

A Rear Anti-Rollbar developed primarily for the Fabia VRS known for its great performance but let down by its understeer prone chassis

The Rear Anti-Rollbar (ARB) creates less body roll enhancing a sporty driving behavior and reducing understeer, also increases the back off oversteer effect at a controlable level adding to your driving experience.

Features The Bar is formed from 23mm Bright Bar Steel and mounts to the standard beam via the lower shock mount as well as being strapped to the main length of the beam by using 2 Mikalor straps and 2 polybushes.

We use the best available steel in the production of this bar and when coupled with the direct mounting to the shock mounts rather than mounting through an adustable link offers superior performance over competitors.

This Bar is also suitable for the Volkswagen Polo, Lupo and Seat Ibiza Mk4.

Many Thanks 

Paul

Pricing:

RRP - £193.99

1-5 People - £150

6+ People - £140

Prices include shipping within the UK and VAT. We can ship worldwide if needed as well, just ask 

Some information below or here if you've not seen this shifter. If there's any questions please send me a message or post below.

Product Features:
-Suitable for VAG related 0A8-type transmissions (see exact specifications below)
-Faster Shifting
-Complete new shift mechanism, including gear selector system.
-Designed and Made in the Netherlands by 4H-TECH
-35% Shortened gear throw 
-Easy to install (no car lift or car jack needed, installs in just 15 minutes)
-Completely reversible to stock
-Made from very high quality steel.
-Short Shifter arm with special shift weight for easy and smooth gear shifts
-4H-TECH structure red powder coated finish
-The factory gear stick model, look and height remains unchanged. (no modifications here!)
-2 years warranty
-Stand alone system. (not to be used with other short shift systems)

Product Includes:
-Short Shifter arm
-Gear selector control arm
-Dust Cap
-Fitting parts
-Fitting guide
-4H-TECH Sticker

Compatible Vehicles:
-Audi (8X) A1 1.4 TSi 140Bhp/150Bhp 2010->
-Audi (8X) S1 Quattro 231bhp 2014->
-Audi (8X) A1 Quattro 256Bhp 2010->
-Audi (8X) A1 2.0 TDi 2010-2014
-Seat (6L) Cordoba 1.9 TDi (2002-2008)
-Seat (6J2) Ibiza 1.4 TSi 150bhp 2016->
-Seat (6J2) Ibiza 1.8 TSi Cupra 2016->
-Seat (6J) Ibiza 1.4 TSi 140bhp 2008-2016
-Seat (6J) Ibiza 2.0 TDi 2008-2015
-Seat (6L) Ibiza 1.9 TDi 130bhp 2002-2008
-Skoda (6Y) Fabia 1.9 TDi 130bhp 2003-2007

-VW (6C) Polo 1.4 TSi 150bhp 2014->
-VW (6C) Polo 1.8 TSi (GTi) 2014->
-VW (6R) Polo 2.0 TFSi (WRC) 2014->
-VW (6R) Polo 1.4 TSi 140bhp 2009->
-VW (9N) Polo 1.9 TDi 130bhp 2001-2010

Price is £229.00 plus postage.

I will leave this until 26th August at which point if we don't reach 6 confirmed buyers I'll ask a staff member to lock the thread.

I have taken this upon myself to try and get this going it is no way associated with Briskoda.

https://shop.jabbasport.com/products/jabbasport-rear-arb-fabia-vrs

------------------------------------

THIS ARB IS NOW ONLY AVAILABLE VIA GROUP BUYS OF 6 OR MORE, EMAIL US FOR MORE INFO IF INTERESTED.

A Rear Anti-Rollbar developed primarily for the Fabia VRS known for its great performance but let down by its understeer prone chassis

The Rear Anti-Rollbar (ARB) creates less body roll enhancing a sporty driving behavior and reducing understeer, also increases the back off oversteer effect at a controlable level adding to your driving experience.

Features The Bar is formed from 23mm Bright Bar Steel and mounts to the standard beam via the lower shock mount as well as being strapped to the main length of the beam by using 2 Mikalor straps and 2 polybushes.

We use the best available steel in the production of this bar and when coupled with the direct mounting to the shock mounts rather than mounting through an adustable link offers superior performance over competitors.

This Bar is also suitable for the Volkswagen Polo, Lupo and Seat Ibiza Mk4.

The ARB Kit Consists of:

1 x Coated Bar

2 x Super-Pro Polybushes

2 x Bush Retainer

2 x Mikalor Clamps

Would anybody here be interested in a potential group buy for T-Shirts or Hoodies at all?

In short, I know the owner of Gear Inkage:

https://gearinkage.co.uk/

To give you a taster, with Colin's permission he's created a design specifically for Briskoda. It's the Skoda Octavia vRS - Please do take a look, change the colours and please give feedback (good or bad).

https://gearinkage.co.uk/collections/the-briskoda-collection

I'm sure I could get us some good pricing if I could generate enough interest. Question is, what would people be interested in?

Skoda Fabia?

Skoda Yeti?

Skoda Roomster?

Skoda Citigo?

-> Poll options above.

Many thanks,

Rob

Just gauging interest at this stage, been looking at getting the front spoiler - pictured below - but as people maybe know from previous dealings with Superskoda, due to the apparent monpoly they have with Skoda parts their prices and postage tend to be prohibitive. This spoiler is no exception at £239.99 plus approximately £28 postage!! However I thought it may be worth looking in to a potential group buy and after emailing them yesterday, today I received a reply offering the following (approximate currency conversion):

1 unit £200 each + p&p

10 - 14 = 20% discount £160 + p&p

15 - 19 = 25% discount £150 + p&p

20 or more 30% discount £140 + p&p

Personally I don't think that's to bad, especially if we can get 20 or more interested.....

At this stage nothing has been finalised but if there is enough interest I will contact them again to organise a discount code for payment etc....

Please Note - BRISKODA and it's Staff are exempt from any legal liability if problems arise from the buy. This buy is not an offical BRISKODA organised buy and therefore BRISKODA or it's Staff, CANNOT be held responsible for any wrong doing that may occur.

Just add you names to the list -

1. vRS_Pagey

Same as the previous four Group Buys (1, 2, 3 & 4)

Badges are a flexible self-adhesive backed vinyl printed with the chosen design and finished with a clear resin dome to give a pronounced finish and protection and durability.

They work equally well stuck over the OEM badge or in place of them.

They can also be shrunk down and used as alloy centres too!

Pretty much anything goes - full colour designs can be printed to white vinyl or flat (or even metallic) colours to a coloured vinyl.

The choice really is yours however a few for inspiration (and if you want any of these designs try to quote what i call them and your colour choice)

Retro

Retro - metallic blue on silver (just to show colour options)

2011 Badge

(bear in mind these are NOT 3D! they are printed to look it but are still a flat badge)

Autobot

Skoda Motosport

Custom Full colour designs

(I'd need you to supply "print ready" artwork for something this complex!)

OEM Badge minus the green

VRS logo on black

(see said they worked as alloy centres! )

If you're interested start a list in the normal Group Buy fashion along with the sizing you want.

Pasty Boy - Retro - Silver on Black - 80mm x2

MonkeyBoy - VRS logo on Black - 55mm x 4

I've done most cars now but it is up to you to make sure you request the correct sizing!

As a very rough guide off the top of my head from memory

Fabia & Octy mk1 - 80mm bonnet and boot - 55mm alloy centres

Fabia & Octy mk2 - 80mm bonnet & 88mm boot - 55mm alloy centres

Superb mk1 - 88mm bonnet & 92mm boot

Superb mk2 - 90mm bonnet and boot

If you are in any doubt get a ruler out!!

As a guide larger badges are about £10 and the alloy centres around £6 when produced on their own but in the January GB they were down to £6.50 and £4 respectively.

Things like extra colours in the design, larger size, international shipping add to the cost but once the quantity is up to a sizeable amount I will discuss with the printer and sort out pricing and everyone will then get a PM to confirm their requirements, the costs there of, delivery details and payment details.

Once all payments are all received then I shall hit the button!

Any questions ask away

20% off for 5 or more and 25% for 10 or more. Postage is a flat £10 per kit

It also helps answer any questions on what parts are required too as they are listed with a link to the Superpro site included too

Any questions then drop me a pm on here, email to sales@w8performance.co.uk or call 01892 882422

Payment can be made via paypal, bank transfer or card over the phone

We can also offer fitting via our friendly garage in Tunbridge Wells

Mk1 and Mk2 Fabia kits -          http://www.superpro.eu.com/catalogue/16/skoda-fabia-mki-2000-_to-2005/        

                                                              Part No                 Retail                     20% Off         

Front and Rear                                    KIT5229K              £249.52                   £199.61        

Front and Rear with Anti Lift                KIT5229ADJK        £249.52                   £199.61         

Running Gear only                              KIT5229K-RG        £225.96                   £180.77

Front Control  Arm Kit                          KIT5229CAK         £142.96                   £114.37        

Mk1 Octavia kits -     http://www.superpro.eu.com/catalogue/17/skoda-octavia-mki-2wd-1998-_to-2004/       

                                                                Part No                 Retail                     20% Off                             

Front, Rear and engine steady           KIT5133K                 £215.88                   £172.70                               

Running Gear only                              KIT5133K-RG          £148.63                   £118.91

Front Control  Arm Kit                          KIT5229CAK           £65.65                     £52.52                                 

Mk2 Octavia kits -             http://www.superpro.eu.com/catalogue/19/skoda-octavia-mkii-2004-_to-current/

                                                                 Part No                 Retail                     20% Off                             

Front and Rear Kit                                KIT5238K                £598.80                   £479.04                                

Front Kit                                                KIT5238CAK           £132.60                   £106.08                                

Rear Kit                                                KIT5238RK              £421.36                   £337.08                                

Consoles with built in Bush                   ALOY3273-80K       £166.80                   £133.44         

I know a number of you have been looking into/awaiting release of this.

I've contacted a retailer of the 0806 http://www.carcamerashop.co.uk/mini-0806.html, can now confirm a GB deal has been reached.

The details and a new GB list starts at http://www.briskoda.net/forums/topic/342870-feeler-0806-mini-dashcam-groupbuy/page-2?p=4130457#entry4130457

Me and a few others were looking at arranging a possible group buy for some sound deadening for our MK1 Fabia vrs. I got into contact with Mike at Sound Deadening Shop and said we have at least 5 people interested.

Instead of a group buy he has kindly offered a 10% discount to forum memers bringing the price down to £76.49 which includes free next working day deliver if ordering before 3pm on the one were interested in.

Use checkout code: SKODASC10

http://www.deadening...m-deadening-mat

He's also said that he will keep the code open for forum members so hopefully there will be no time limit. Hope this helps, I'll be ordering mine fairy soonish possibly after payday. I just thought i'd put this thread up to anyone that has considered doing it in the past or for the future.

Jamie

Due to personal reasons I can no longer continue and don't want to let people down.

Three members have paid and this has been refunded via PayPal.

Please do not send any more monies.

Please accept my apologies.

Thanks

I'm going to order some new style logo key fob badges (14mm) from China that should fit in place of the old logo and should look something like this (picture hijacked from another thread on here - sorry laars). They are 3D and metallic, so a decent quality I am led to believe.

They only come in sheets of 10 though!

I'll obviously have 2 for myself, but how many more do others want?

​They will be £2.50 per pair including postage.

Add your name and how many you require to the list below and I'll close the GB at the end of November 10th. Reason for the short deadline is that they are discounted on 11.11.15 and we can get them cheaper.

I can't guarantee they will arrive from China in time for Christmas delivery though, so I am not promising this. I will send them out in the post upon payment (after I have received them).

Check that yours are 14mm across and that you are OK to remove the existing badge in order to put these in their place.

This buy is not an offical BRISKODA organised buy and therefore BRISKODA CANNOT be held responsible for any wrong doing that may occur. BRISKODA have no legal liability in this buy should any problems arise.

After some discussion on a thread in the Mk1 Fabia section, I've been in touch with Darkside Developments about a potential discount on their oil cooler setup for the Mk1 Fabia vRS.

The kit in question is as per the link below...

http://www.darksidedevelopments.co.uk/products/darkside-universal-front-mounted-oil-cooler-kit.html

The setup looks likes a solid bit of kit and I'm sure will be excellent quality being sold by Darkside. You have the option to run with a thermostatic sandwich plate or not (good for a road car) and a choice of either 10 or 13 row cooler depending on where you want to fit it and the cooling required. Oil lines are push on hoses, so you can cut them down to size for a very neat installation.

I have managed to negotiate a 10% discount for between 5-10 units sold, and a total of 15% discount for over 10 units sold.

Below are the options available...

Oil cooler kit including a non-thermostatic sandwich plate and a 10 row oil cooler

Original unit price (including VAT):   £162

Group buy price (including VAT):   £145.80 (5-10 units sold)   /   £137.70 (10+ units sold)

Oil cooler kit including a non-thermostatic sandwich plate and a 13 row cooler

Original unit price (including VAT):   £168

Group buy price (including VAT):   £151.20 (5-10 units sold)   /   £142.80 (10+ units sold)

Oil cooler kit including a thermostatic sandwich plate and a 10 row oil cooler

Original unit price (including VAT):   £210

Group buy price (including VAT):   £189 (5-10 units sold)   /   £178.50 (10+ units sold)

Oil cooler kit including a thermostatic sandwich plate and a 13 row cooler

Original unit price (including VAT):   £216

Group buy price (including VAT):   £194.40 (5-10 units sold)   /   £183.60 (10+ units sold)

For anyone wondering why the initial prices are much higher than Darkside's website, please be aware that their products advertised on the website do not include VAT.

Darkside have said they will deliver the entire group buy to one address for free. Hence postage and packaging will be on top of this. I have put a quick quote up on Parcelmonkey, and each parcel would be looking at approximately £12 delivery. With packaging I would estimate that the total for delivery would be £15.

Please note this is an early estimate. I will get a more accurate price if there are enough participants to allow a discount. I may be able to sort it cheaper.

I have no issues with members coming to collect their kit from me personally (in fact I would prefer it!). I am based in Wrexham (North East Wales).

If interested please add your name in the usual style (copy and paste the below list), stating which option of cooler and thermostatic plate you require.

1. alex_e3 - thermostatic plate & 10 row cooler

2.

3.

4.

5.

In the interest of adhering to the Briskoda group buy rules, I am going to put a closing date for payment in full by 3rd August 2015. I will add payment details if and when we get enough on the list. I will accept payment via Paypal or cash in person only. You are free to send it as a gift or as paying for goods, but please add the required Paypal fee on top.

This group buy is not organised by BRISKODA, as such, they do not accept any legal liability if problems arise from the buy and cannot be held responsible for any wrong doing that may occur.

Thanks all!

I am aware of a couple of you that are interested in a CG-Lock as I am too. The usual price of these (proper ones, latest design) seems to be around £45+delivery.

I have been in touch with CG-Lock and have had the following response.

11 - dark_hero

12 - Swaffy

13 - dbg400

14 - caine9

-----------------------------------------------------------

First batch of email addresses sent to supplier - group buy still very much OPEN

15 - clarkey666

16 - octavia5

17 - lwhite92

18 - lwhite92

19 - skippyvrs

20 -

Running in the same format as all the previous Group Buys the badges are a flexible self-adhesive backed vinyl printed with the chosen design and finished with a clear resin dome to give a pronounced finish and protection and durability.
They work equally well stuck over the OEM badge or in place of them.
They can also be shrunk down and used as alloy wheel or steering wheel centres too!

Pretty much anything goes - solid flat colours to a coloured vinyl are the best finish but full colour designs can be printed to white vinyl. 
The choice really is yours however a few for inspiration (and if you want any of these designs try to quote what i call them and your colour choice)

Retro

Retro in Lime Green & Black

Autobot Steering whel centre 

also in lime and black

Skoda Motosport

Custom Full colour designs
(I'd need you to supply "print ready" artwork for something this complex!)

OEM Badge minus the green

My version of the new 2013 Badge

Which can be done in whatever colour/colours one fancies

VRS logo on black alloy centres!


 

Here is a link to the photobucket album where i have dumped most badge artworks and images

feel free to browse and let it guide your decisions

the images should be named just try to use that as what you put on the list 

PastyBadge Design Gallery

However don't feel limited by this collection, and not everything i have produced is in there.

Everything is produced to order so you can be unique or have a badge shown in a different colour combo if required.

If you're interested start a list in the normal Group Buy fashion along with the sizing you want.

Quote

Quote

Quote

Pasty Boy - Retro - Silver on Black - 80mm x2

I've done most cars now but it is your responsibility to make sure you request the correct sizing!
As a very rough guide off the top of my head from memory

Fabia & Octy mk1 - 80mm bonnet and boot - 55mm alloy centres
Fabia & Octy mk2 - 80mm boot & 88mm bonnet - 55mm alloy centres
Superb mk1 - 88mm bonnet & 92mm boot
Superb mk2 - 90mm bonnet and boot

If in doubt.... get a ruler out!!

As a guide larger badges are about £10 and the alloy centres around £6 when produced on their own but normally come down to around £6.50 and £4 respectively.

Things like extra colours in the design, larger size, international shipping add to the cost but once the quantity is up to a sizeable amount I will discuss with the printer and sort out pricing and everyone will then get a PM to confirm their requirements, the costs there of, delivery details and payment details.

Once the quantity gets up to enough to warrant the maximum discount (generally around 100 badges) I shall contact everyone via PM to confirm design, sizing and cost; and to request payment.

Once all payments are in I shall hit the button! 

Generally these things take a month to go down and then a couple of weeks to be produced and posted

Any questions ask away 

However don't feel limited by this collection, and not everything i have produced is in there.

Everything is produced to order so you can be unique or have a badge shown in a different colour combo if required.

If you're interested start a list in the normal Group Buy fashion along with the sizing you want.

Pasty Boy - Retro - Silver on Black - 80mm x2

I've done most cars now but it is your responsibility to make sure you request the correct sizing!
As a very rough guide off the top of my head from memory

Fabia & Octy mk1 - 80mm bonnet and boot - 55mm alloy centres
Fabia & Octy mk2 - 80mm boot & 88mm bonnet - 55mm alloy centres
Superb mk1 - 88mm bonnet & 92mm boot
Superb mk2 - 90mm bonnet and boot

If in doubt.... get a ruler out!!

As a guide larger badges are about £10 and the alloy centres around £6 when produced on their own but normally come down to around £6.50 and £4 respectively.

Things like extra colours in the design, larger size, international shipping add to the cost but once the quantity is up to a sizeable amount I will discuss with the printer and sort out pricing and everyone will then get a PM to confirm their requirements, the costs there of, delivery details and payment details.

Once the quantity gets up to enough to warrant the maximum discount (generally around 100 badges) I shall contact everyone via PM to confirm design, sizing and cost; and to request payment.

Once all payments are in I shall hit the button! 

Generally these things take a month to go down and then a couple of weeks to be produced and posted

Any questions ask away 

I've been in touch with the Car Camera Shop recently, regarding the purchase of a Lukas dash cam (a new addition to their range). They mentioned a purchase of 5 or more will allow them to offer a discount, the size and nature of which depends on the number required.  (The provisional discount 5% for a group of 5 or more.)

At this point, I'd like to test the waters for appetite for a group buy, I'm looking at the Lukas dash cam, but the group buy needn't be limited to that model. So, if you're interested, please can you provide your preferred camera model below?

If there's enough appetite, then I can firm up details with them to offer a fully fledged buy.

Edit: Please visit the Car Camera Shop website to view their available products. I've listed some of the other models I've noticed people on the forum using, but suggest you read up and have a look at the range. (Prices as of 7 June 2015).

The one's I've been looking at.

Lukas LK-7950     £329.99    (1080p front & rear, wifi with app to view)

Lukas LK-9750     £349.99    (1080p front & rear, with screen)

I have a mi-witness at the moment, but the cameras are only 720p and 640x480 (rear) so a little behind many of these.

Others, in no particular order:

Mobius (single)   £69.99   (1080p, also available in a dual package, no GPS)

G1W                   £42.99   (720p, seems a good starter)

Mini-0801           £74.99   (1080p, £5.00 more for GPS)

Nextbase 202     £79.99   (720p)

Blackvue 650-GW+2CH    £289.99   (Front 1080p + Rear 720p, You'll probably need some extras with this - e.g. power magic haywire kit, currently has 32GB card with it).

This group buy is not organised by BRISKODA, as such, they do not accept any legal liability if problems arise from the buy and cannot be held responsible for any wrong doing that may occur.

DTUK®, or to give us our full name of Diesel Tuning UK LTD, was formed in 2005 by our Managing Director, Andrew Pawley. He saw a gap in the market for a no nonsense approach to diesel tuning and offer the UK consumers one of the best diesel tuning systems on the market without the premium price tag. This all came about after he purchased a 3.0V6 CDTI Vauxhall Vectra 177PS during 2004, after trying tuning boxes from other companies without any success, and seeing that most "manufacturers" claiming to make boxes in the UK were basically buying boxes from anywhere and passing them off as their own..

One thing we don't claim is to make the hardware, (the actual tuning boxes), we're supplied by and work closely with one of Germany's longest established Diesel Tuning Box manufacturers, and over the last 4/5 years have been involved in the development of various applications. In fact the majority of the software we use here at DTUK in unique to ourselves which has been developed in house by Andrew himself.

Diesel Tuning UK LTD | Improved Diesel Performance And Economy | Digital Diesel Chips

Recent developments include our latest CRD-T module which connects to the common rail + boost sensor and is suitable for the VAG 2.0TDI 110, 120, 136, 140 and 170PS

our latest RR feedback..

v

CLICK BELOW TO DOWNLOAD FITTING INSTRUCTIONS FOR THE 2.0 TDI 140/170PS

http://www.diesel-pe..._ldk_quer_e.pdf

We will be offering members of Briskoda

£80 off

the full rrp on all of our systems

CRD-T RRP £439.00 inc vat – Briskoda Group Buy offer £365.95 inc vat and uk carriage

suitable for the 2.0tdi Common Rail 110/140/150/170/184PS

DTUK? CRD-T MultiChannel Common Rail+Boost | chip tuning boxes from Diesel Tuning UK

CRD2+ RRP £389.00 inc vat – Briskoda Group Buy offer is £315.95 inc vat and uk carriage

suitable for the 2.0tdi Common Rail 110/140/150/170/184PS

DTUK? CRD2+? Multimap Power System | chip tuning boxes from Diesel Tuning UK

PD2 RRP £389 inc vat – Briskoda Group Buy offer is £315.95 inc vat and uk carriage

suitable for the 1.9 and 2.0 PD (excluding the 170PS)

DTUK? PD2? Pump Duse System | chip tuning boxes from Diesel Tuning UK

VPC RRP £389 inc vat – Briskoda Group Buy offer is £315.95 inc vat and uk carriage

suitable for the 2.5 V6 150/155/165/180PS

DTUK? VPC Direct Injection System | chip tuning boxes from Diesel Tuning UK

To take advantage of this offer, either drop me a pm for the relevant discount code to buy online at www.diesel-performance.co.uk or give us a call on 01207 299538

cheers

Andrew

Pd100 kits @ £36.00 including postage costs
PD105 kits @ £36.00 including postage costs
Pd130 ASZ kits @ £36.00 including postage costs
Pd130 BLT kits @ £38.00 including postage costs

Pd140 Kits @ £36.00 including postage costs
Pd160 Kits @ £36.00 including postage costs

Pd170 kits @ £38.00 including postage costs
 
With Boost Nipples
Pd100 kits @ £39.00 including postage costs

PD105 kits @ £39.00 including postage costs
Pd130 ASZ kits @ £39.00 including postage costs
Pd130 BLT kits @ £41.00 including postage costs

Pd140 Kits @ £41.00 including postage costs

Pd160 Kits @ £41.00 including postage costs

Pd170 kits @ £41.00 including postage costs

UPGRADE kits to 57mm for an extra £2

The kit consists of everything needed minus the 90 degree bend, you can either chop down your original pipe work or order a 90 degree bend that has a diameter of 52mm (2inch)
 
Instructions on fitting can be found HERE

I Will keep this GB running until we get at least 8 people. Once everyone has paid up people should start receiving their goods within 14 days.Please keep questions out of this post and enquire here this is to avoid cluttering up thread and keep confusion to a minimum.

I really want to try and make this an on-going group buy to "give back" to the forum so all being well these kits will always be available providing the source keeps making them
 

This is not an official BRISKODA organised buy and therefore BRISKODA CANNOT be held responsible for any wrong doing that may occur

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Please copy and paste everything from below the dotted line (including this text)
Please state forum name, EGR require and engine code

• Joelk2010 - PD130 - ASZ (This is an example of layout, first person please replace this with your details)
•  
•  
•  
•  
•  
•  
•  
•  
•  

http://www.kenwood-e...s.co.uk/car/vw/

i can put you in touch with a VW main dealer who has 7 of these brand new in the box and has got to sell them below cost!

you will recieve a Vat paid reciept and be covered by a 12 month warranty

please note i am making nothing on these and just want to do a member a good turn

you will have to mention my name to the seller and he will sort you out

the only problem is when you turn them on the start screen has the VW logo but this can be changed

instructions are here http://wikibin.org/a...-dnx520vbt.html or here http://darkmoon.dynd...p.com/dnx520vbt

please note this is 100% legal

please PM me and i will give you details

**please mods feel free to contact me and i will give you all the info you need to know to make sure its 100% legit**

Running in the same format as all the previous Group Buys the badges are a flexible self-adhesive backed vinyl printed with the chosen design and finished with a clear resin dome to give a pronounced finish and protection and durability.
They work equally well stuck over the OEM badge or in place of them.
They can also be shrunk down and used as alloy wheel or steering wheel centres too!

Pretty much anything goes - solid flat colours to a coloured vinyl are the best finish but full colour designs can be printed to white vinyl. 
The choice really is yours however a few for inspiration (and if you want any of these designs try to quote what i call them and your colour choice)

Retro

Retro in Lime Green & Black

Autobot Steering whel centre 

also in lime and black

Skoda Motosport

Custom Full colour designs
(I'd need you to supply "print ready" artwork for something this complex!)

OEM Badge minus the green

My version of the new 2013 Badge

Which can be done in whatever colour/colours one fancies

VRS logo on black alloy centres!


 

Here is a link to the photobucket album where i have dumped most badge artworks and images

feel free to browse and let it guide your decisions

the images should be named just try to use that as what you put on the list

PastyBadge Design Gallery

However don't feel limited by this collection, and not everything i have produced is in there.

Everything is produced to order so you can be unique or have a badge shown in a different colour combo if required.

If you're interested start a list in the normal Group Buy fashion along with the sizing you want.

Quote

Quote

Pasty Boy - Retro - Silver on Black - 80mm x2

I've done most cars now but it is your responsibility to make sure you request the correct sizing!
As a very rough guide off the top of my head from memory

Fabia & Octy mk1 - 80mm bonnet and boot - 55mm alloy centres
Fabia & Octy mk2 - 80mm boot & 88mm bonnet - 55mm alloy centres
Superb mk1 - 88mm bonnet & 92mm boot
Superb mk2 - 90mm bonnet and boot

If in doubt.... get a ruler out!!

As a guide larger badges are about £10 and the alloy centres around £6 when produced on their own but normally come down to around £6.50 and £4 respectively.

Things like extra colours in the design, larger size, international shipping add to the cost but once the quantity is up to a sizeable amount I will discuss with the printer and sort out pricing and everyone will then get a PM to confirm their requirements, the costs there of, delivery details and payment details.

Once the quantity gets up to enough to warrant the maximum discount (generally around 100 badges) I shall contact everyone via PM to confirm design, sizing and cost; and to request payment.

Once all payments are in I shall hit the button! 

Generally these things take a month to go down and then a couple of weeks to be produced and posted

Any questions ask away 

This Group Buy is being organised by myself (3rd Party) for Bonnet struts for ALL MODELS from Superskoda which can be found here; http://www.superskoda.com/Skoda/OCTAVIA-II/Octavia-II-04-12-power-hood-damper-system-KI-R-RIGHT-side-version -OCTY 2 RIGHT SIDE 33.99 Eur + 15.99 Eur Postage

http://www.superskoda.com/Skoda/OCTAVIA-II/Octavia-II-04-12-power-hood-damper-system-KI-R-LEFT - OCTY 2 LEFT SIDE VERSION 39.99 Eur + 15.99 Eur Postage

http://www.superskoda.com/Skoda/OCTAVIA-III/Octavia-III-hood-power-damper-set-KI-R - OCTY 3 - 39.99 Eur + 15.99 Eur Postage

http://www.superskoda.com/Skoda/FABIA/Fabia-I-99-07-power-lift-set-for-hood-KI-R - FABIA 1 - 39.99 Eur + 15.99 Eur Postage

http://www.superskoda.com/Skoda/Yeti/Skoda-Yeti-hood-damper-KI-R - YETI - 39.99 Eur + 15.99 Eur Postage

http://www.superskoda.com/Skoda/RAPID/Rapid-power-hood-damper-system-KI-R-LEFT-side-version - RAPID, which will be available at end of this month. No price as yet.

The cost reduction will be as follows; (Costs are for for Octy 2 right side as an example)

30 Units - 30% Discount - 23.79 + Shipping[/b]

Units costing 39.99 price reductions;

30 Units - 30% Discount - 27.99 Euro + Shipping

Disclaimer. I am running this Group Buy to try and save us a bit of money as with Superksoda being in Europe the shipping costs are pretty high if you only want one item weighing 2.1kgs. In no way is Briskoda associated with this group buy. All prices converted to pounds are as at 13/08/14 and are subject to change.

Final list;

1: Keechy - MK2 OCTY RIGHT SIDE - PAID

2: mikeholroyd - MK2 OCTY - LEFT SIDE - PAID

3: adamal - MK2 OCTY - RIGHT SIDE - PAID

4: j306td - MK2 OCTY - RIGHT SIDE - PAID

5: such - MK2 OCTY - LEFT SIDE - PAID

6: rip - MK2 OCTY - RIGHT SIDE - PAID

7: turbobell - MK2 OCTY LEFT SIDE - PAID

8: doofy - MK2 OCTY - LEFT SIDE - PAID

9: cactusjack - MK2 OCTY - RIGHT SIDE - PAID

10. Superskoda - MK2 OCTY - RIGHT SIDE - PAID

11. Structures - MK2 OCTY - RIGHT SIDE - PAID

12. 88rsr - MK2 OCTY LEFT SIDE - PAID

13. Gizmo68 ( FL Yeti!). PAID

14. MikeyW94 - MK2 OCTY RIGHT SIDE - PAID

15. Wayne Kerr - MK2 OCTY -RIGHT SIDE - PAID

16. Andyvee - MK3 octy - Non powered PAID

17. Bluemoonin65 - FL Yeti - PAID

18. Stewpotz - MK1 FABIA - PAID

19. Mcalp - FL Yeti - PAID

20. Zarniwoop - Yeti (pre-FL) PAID

21. mikep - Yeti - PAID

22.S76 yeti 2014 - PAID

23. Hutchysrs50 (mk1 Fabia) - PAID

24. Daymo666 - MK1 FABIA - PAID

25. Kieranlt - mk1 fabia

26. MajorTom - preFL Yeti - PAID

27. DanHam - MK1 FABIA - PAID

28. Mr G 76 - MK2 OCTY LEFT SIDE - PAID

29. LouieVrs - mk1 fab

30. Thewilfmeister MK1 FAB

31 Mikebham - MK3 OCTY NON POWERED - PAID

32. Smeghead - Mk3 Octy - NON POWERED - PAID

33. j0hn - MK2 OCTY - LEFT SIDE - PAID

34. KaiserB_uk - Mk3 Octy - non powered - PAID

35. Gazpot0111645 - MK2 Octy - LEFT SIDE - PAID

36. DGW - MK2 OCTY - RIGHT SIDE -PAID

37. Livy - Mk1 Fabia - PAID

38. JJJ66 - Mk3 Octy NON POWERED - PAID

39. Banksie Mk3 Octy NON POWERED- PAID

40. Davidbird - mk2 Octy - RIGHT SIDE - PAID

41. Notts-vrs - mk1 Fabia - PAID

42. Slavish - MK2 OCTY - RIGHT SIDE - PAID

43. alex_e3 - Mk1 Fabia - PAID

44. M12MKD - MK2 OCTI (left hand side please). PAID

45. chris4500uk - mk2 octy RIGHT SIDE - PAID

Could the mk2 octy boys PM me which side they would like when I have given them my PayPal details

I have included a 6% exchange rate charge as PayPal will charge me when I send the money to superskoda and want to make sure I don't incur any charges my self. I would like to point out that I have not run this group buy to make any money for my self, so I will be offering any profits I make to Briskoda as a thank you for the hard work and hopefully can go towards next years national (which I missed this year but it looked like a very good day). I hope this will be okay with everyone?

Prices are as follows;

Octy 2 LEFT SIDE, octy 3, yeti and fabia prices;

Strut - £22.45

6% for exchange rate charge - £1.35

Shipping - £6.80

Total cost - £30.60

Total saving - £14.33

Octy 2 RIGHT SIDE;

Strut - £19.08

6% for exchange Rate charge - £1.15

Shipping - £6.80

Total - £27.03

Total saving- £13.08

Also when paying via paypal, can you either 'gift' or receive the charges your self. I know some people would like to have protection and I don't mind as long as you take the charges. Thanks

Some people have also asked if they could collect from my self which is also fine if you are unsure how far I am my post code is; NP23 or alternatively through the week work at NP44 but this would have to be a limited amount of people as I am in work. If you would like to collect then please take the shipping costs away and PM me.

UPDATED;

Closing date for payments is 22nd August.

People had said they wanted a coatings Group Buy, so there was really only one option for me.

I have been speaking with Matt at Obsidian Detailing (Stangalang on DW) the UK and EU distributor for ArtDeShine for a while now about a GB, last night we hashed out the details of what i think is a great offer for Briskoda Members.

This is Two Group Buys in One.

Only 20 places each,

ArtDeShine Coatings Bundle Group Buy:

ArtDeSicko 30ml
Nano Gloss Protection System Spray 250ml
ArtDeWheel 20ml

Normal RRP: £60
Group Buy price £50 delivered


The now famous artdesicko is an si04 silica hybrid formulated to be able to protect automotive surfaces year round. As a hybrid of cristobalite and polydimethylsiloxane it creates a strong bond with the paint. Its characteristics are a deep wet gloss and hydrophilic water behaviour.

ArtDeShine's ArtDeWheel is a wheel coating, which provides anti-fouling of brake dust to wheels. This product is specially formulated with Siloxane and Silicone. These compounds help the product bond uniformly to the wheel and produce a durable coat, which prevents the bonding of brake dust under high temperature. The durability of the wheel coating is about 6 months.

ArtdeShine Nano Gloss Sealant V2 is newly formulated to give an instant, ultra deep gloss on automotive surfaces like paint, plastic, metal, chrome and on stickers. This new formula will also turn the surface hydrophobic to repel water.

The Artdeshine Series is designed for QD (quick detailing) and a LSP (last-step process) to easily maintain your automotive with a coating of polymer sealant and wax.

• Deepens gloss
• Easy application
• Repels dust
• Water resistant
• Enhances colour
• Non-smearing and non-chalky
• Removes oil stains, tar, bug stains, sap and dust
• Protection against microbial growth (i.e inhibition of algae growth)

The durability for the Nano Gloss Sealant is about 2 months.

Obsidian ArtDeKotsos Hybrid Wax 200ml
Normal RRP: £40.00
Group Buy Price: £32.00 delivered.


Anybody who takes both GB's gets the lot for £80 delivered

ArtDeShine UK are direct shipping these for me straight away on receipt of payment so rapid service


Both of these Group Buys have only 20 places each, please add your name via a post in this thread stating Coatings or Coatings and Wax. I will administer a list in this first post for both to keep tidy.

Coating Bundle

1.vrsRob PAID
2.VRobS PAID
3.simonsheil PAID
4. Sam83
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

Obsidian ArtDeKotsos Wax

1.vrsRob. PAID
2.VRobS PAID
3.simonsheil PAID
4. Sam83
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

And just to show some results with ADS Sicko

They have agreed to do a group buy on 10 of their fantastic Wash Pads (Large size) if there is enough interest..and their Wheel Mitt too

Baker21 (Founder of Dooka and inspirational Detailer.. posting on Briskoda) ran this group buy a while ago

HERE

Rob @ Dooka will confirm soon and give me details of how to purchase

Price will be £18 with Free Recorded delivery(TBC) for the Wash Pad ...Full Price with the Wheel Mitt ..TBA

Please register your interest in the usual way below

1.

2.

3.

4.

5.

6.

7.

8.

9.

10

Reserves

1.

2.

3.

If anyone wants to organise a buy then that person MUST contact a member of staff first to seek clearance to organise one. This is to ensure that the correct rules and regulations are understood and to enable a successful buy for everyone.

Once the above has been done and the GB has been OK'd, the first post should describe the following:

1) Some detail of product/service being bought and if possible, a web page for more information.

2) The standard price and discounted price.

3) The minimum number of people required to qualify for discounted price.

4) A set time limit over which the buy is to be run.

A disclaimer must also be included to exempt BRISKODA from any legal liability if problems arise from the buy.

It must also be stated that the buy is not an offical BRISKODA organised buy and therefore BRISKODA CANNOT be held responsible for any wrong doing that may occur.

All buy organisers will be subject to a "probationary" period. This is to ensure that buys are well organised and successfull.

If you have any questions regarding the above rules please PM one of the Moderators or ColinD.

Many thanks.

Full details here:

http://www.briskoda.net/forums/topic/333119-detailing-service-for-briskoda-members/

They will come in either a wall hanging or desk CD Jewel case formats

Production will be limited to 100 copies split between 75 wall and 25 desk.

Wall Calendars are £10 each

Desk Calendars are £7 each

The above excludes delivery which is charged at £2 per order/shipment

for those who need that explaining:

1 wall calendar will be £10 + £2 so send £12

2 wall calendars will be £10 + £10 + £2 - so send £22

a wall and a desk will be £10 + £7 + £2 - so send £19

Anything outside of the norm (order for 50, international shipment) drop me a PM and i'll sort out a price.

Payments are easiest via paypal to briskodacalendar@gmail.com

Sending payment as a gift so i avoid fees would be lovely but understand completely if you do it as as a transaction with the extra security that brings.

Please make sure that payments include user name, order details, and delivery address.

I will keep a list up-to-date in this thread as payments arrive and sales are registered.

those without paypal get in touch and we'll sort out an alternative method

As said above the plan (at the moment) is a limited run of 100 calendars in total, so you may need to be quick.

Pretty straight forward but any questions just ask

These are not made or sold by briskoda, they are unofficial.