roykssop

What is Yours Amundsen Part Number? Is it start with 5Q or 5E? If 5Q it's MIB2 so You can activate SmartLink with Your dealer for about 100€. For activation, dealer must connect with Skoda servers so it's not only code. Check if You have SmartLink menu. If it's 5E as MIB1 You can have only MirrorLink, if it was activated during purchase.

Thi sis not FW problem but certification of apllication to run in motion. Google for VIM or OBDEleven.

Does anyone have Amundsen with 245 firmware and have correctly working parking lines? I have retrofit Amundsen with 245 firmware to Rapid with originally Bolero FW 361 with factory activated parking lines. After retrofit lines look like in the attachment.

Relocation: 40" TV, two people, and lot of other stuff:

Yes I do.

Easy Entry - this is normal. Easy entry means when You use knob the backseat and seat come together, without easy entry using knob means move backseat only. Parking sensor - one beep means the sensor as activated and when come enough close to obstruction then they start beeping respectively to distance. When You come to close to obstruction sound will be constant. Beeps start about 45-50cm from obstruction and constant sound will be heared for distance 15-20cm.

It was in built-up area with constant speed of 50kmph on fifth gear for about 20km in polish Tatras mountains (from Zakopane to Czarny Dunajec - link). My best economy travel was 3,4l/100km from Lodz to Katowice (200km) with cruise control set to 80kmph.

3,1l/100km it's about 91.12 mpg.

This is automatic brake dryer. That's how it's supposed to be.

Yes i have. Dealer adjusted the lock on the door and then was better, but now, after about 1000km the noise occurs more frequently than directly after adjustment.

Which MY is yours? Do You have 3Doors? In my case that's probably door lock crack. Ones my dealer improved the door lock but now I hear it again.