VRS.123

Unplug the EGR drove for about an mile still showing 0.00gs with the live data on the computer

Loom and plug all seem fine and in contact..

After replacing the egr valve with a genuine new replacement the findings from the MAF are as follow.. Live data for M.A.F showed 365.51 on pulling away then throughtout test showed 0.00 then pulling up showed 87.42..

Thriple checked all fuses.. And all is well..

Yeah air filter seems fine.. No excessive oil etc

Seem to be bambuzzled with this bizarre error code and dont really want to pass the car to dealers to say change maf sensor again..

Hi All I got 55 plate 1.9 TDI BKC ENGINE, and keep getting error "emissions workshop!" although car has power, turbo kicks in well, fuel consumption as normal just an annoying yellow engine management light on dashboard. Plugged it into VCDS/VAG.COM got the following error: Fault Found: 16486 - Mass Air Flow Sensor (G70) P0102 - 000 - Signal too Low Freeze Frame: RPM: 798 /min Torque: 29.3 Nm Speed: 0.0 km/h Load: 0.0 % Duty Cycle: 65.3 % Bin. Bits: 00101111 I cleaned out the EGR VALVE, cleaned the maf sensor inputs. Double checked all wiring for breakages. Swapped the sensor with a genuine from dealers working one. Still no luck!! Deleted the error, however after restarting the car on second go the eror on the dashboard returns with the engine management light Dealers are wanting £49.99-£69.99 for a diagnosis to find the culprit and are not free until end of week, which will be last resort.... ANY SUGGESTIONS/HELP/HINTS TIPS ANYONE ANY HELP GREATLY APPRECIATED Thanks all

Has anybody got the part number for the uprated seat cupra rear wishbone bushes. Bought some from TPS But think they gave wrong ones. Part Number on invoice is 1K0407183E THANKS

Has anybody got the part number for the uprated seat cupra rear wishbone bushes. Bought some from TPS But think they gave wrong ones. Part Number on invoice is 1K0407183E THANKS

Has anybody got the part number for the uprated seat cupra rear wishbone bushes. Bought some from TPS But think they gave wrong ones. Part Number on invoice is 1K0407183E THANKS

Let me know when you fit them spud31.. As im thinking of getting them done too.. See what happens

or these from ebay are worth a shot as so cheap there made in south africa and have a good reputation http://www.ebay.co.u...84625353&_rdc=1 Has anyone tried these what Spud shown above?

BUMP!! Never got round to doing these at the time.. Has anyone got any updated links or sites which are doing any deals? Thanks

Will a spare wheel from a skoda Octavia 16" steelie fit alright with 312mm brakes on A SKODA FABIA VRS?

Will a spare wheel from a skoda Octavia 16" steelie fit alright with 312mm brakes? As currently got 15" spare steely doubt that would be any good with 312mm?