DaveA

Just back from a long drive and am having the same issue as you guys, my dipped headlights are way too high and I managed to get flashed about 12 times! Strange happening though, I turned of the main road and hit a pot hole . To my surprise the lights lowered and remained at what I think was the correct level for about 30 miles until I came off the motorway and came to a complete stop when they adjusted to the high level causing the headlight flashing to begin again. This is driving me nuts. So do you think this is some sort of leveling issue or a software issue? Cheers

Look forward to seeing the pics..

Have went for eibach spacers but they dont come with bolts however have found Taper 60 degree seat M14x1.5, 50mm shaft length, 17mm HEX from PRI Racing which should do the job.

Think Im going to take the jump and go for spacers on the rear and see what they look like. Plan is to go for 20mm but I will need new nuts, has anyone information on where to purchase new nuts and there length etc? Any info would be helpful. Cheers all.

Rob, I spoke to spring loaded who in turn contacted Eibach and came back with the kit linked. I then to confirm also contacted Eibach UK direct and got the same number. Springs fitted give good ride quality, not as harsh as the HR springs on my A4 only down side I preferred the look of the A4 with HR springs fitted. Given the choice Id side with comfort. On the spacers front I definitely think they will improve the look especially of the rear, somewhere in the 20mm mark maybe the answer I think.

Yes, here you go! http://www.spring-loaded.co.uk/proddetail.asp?prod=Eibach~Pro-Kit~Spring~Kit~Octavia~VRS~5E~Estate~2012~on~%3AE10-15-021-06-22

Eibach UK

Look forward to pics guys, Ive Eibach springs but they don't lower as much as the HR so will be interesting to see difference. This pic is from Eibach, with lowering springs fitted.

Hi Rob, Did you go for the springs and spacers?

Dont suppose you have any pics ? trying to decide if its going to be noticable.

I wasnt sure it would need as much as 30mm but good to see an example. Where did you find the photo?

I defo agree a minor tweek is required, has anyone taken the jump and purchased spacers?

Good idea.

Im sure I have that setting, but like you was not 100% on its function.

Id agree Damo, error on my part but like you say can be rectified. Now I need to begin looking for a good installer in east of scotland.