DMilleaVRS

well im guessing the fronts are as important as the backs so i assume its got to be the same

whats FT ?????

Afternoon all I have recently returned from a trip to France and to fit all my carp gear in i had to remove the rear seats completly save on weight and improve loading, however im not sure of the torque setting the bolts need to be set with to ensure they are once again to safe standards can any one help?

Hi all little confused to which oil I need to use I've bought Castor Edge turbo diesel 5W-40 Fully synthetic it states on the back for VW 502 00/505 00/ 505 01 my log book states VW 507 is this OK?

Bluetooth RSAP app Sent from my GT-I9505 using Tapatalk

buying a 330d Stick with the octy my mates had endless trouble with his 57 330d plus he is gutted that my boot holds more then just golf clubs :-) Sent from my GT-I9505 using Tapatalk

I gathered that but surely it would of made more sense to have wired them up to the DRL's so they come on when the parking lights are engaged just my opinion, it's strange because on a second look there wired going to it so I'm assuming it's not connected to the loom. Sent from my GT-I9505 using Tapatalk

Never!!! what's the point in even fitting them? Sent from my GT-I9505 using Tapatalk

Hi all just wondered if any one could clear this up for me I was playing around with the headlights this afternoon and noticed that there is a small looking bulbs that is fitted just above the main projector headlight in each headlight I assumed these where parking bulbs similar to the standard 501's on most cars however they don't seem to light up on any setting so what are these bulbs for. I have the face lift model with daytime running LED if this matters

Is the facia still going also will it fit the face lift mk2 octy Sent from my GT-I9505 using Tapatalk

I had this problem couple if weeks back mick, found that the pump was engaging but no spray, checked the hoses all in tacked so I got a small pin and pushed it through the hole found that it was blocked 3-4 times doing this eventually shifted the dirt still don't know how it got in there. Hope this helps Sent from my GT-I9505 using Tapatalk

Solved the issue the leads SOT-976 have changed this year so now you do not have to plug the live ignition and ground plug from the parrot in asnit runs all the power from the main quad block, so all I did was swapped the two fuses over until I had the goodbye message when shutting down and then had to borrow a multimeter to test which fuse was live and what was ignition once found piggy backed off the ignition feed amd hay presto works a treat It did baffle me though as I used the old type SOT-976 lead in my vrs fL 10 Plate and the new one in my dads same spec newer reg which I also found the fuse box arrangement is slightly different. Juwt though my difficulties may help others DMilleaVRS

this is the lead I have for my Skoda http://www.ebay.co.uk/itm/SOT-976-Skoda-Octavia-2004-Car-Bluetooth-Parrot-SOT-Lead-T-Harness-ISO-Adaptor-/261232168896?pt=UK_Cars_Parts_Vehicles_Terminals_Cabling_ET&hash=item3cd2a68fc0 this is one my dad has http://www.ebay.co.uk/itm/261281039272?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D261281039272%26_rdc%3D1 have I made a stupid error?

ive looked on the bottom row I only have a 5 amp fuse which is the light switch (49) 48,47,46 all have no pins in the fuse holder and are not assigned

After recently fitting a Parrot mki9200 to my skoda Octavia VRS 10 plate with no issues my dad decided he wanted me to fit the same kit to his car skoda Octavia VRS 60 plate however im getting serious issues I fitted the kit the same way as mine so in know its the right way as mine works perfect however with no ignition on I get a constant live feed no matter which 10amp fuse I piggy back off and when I unplug the fuse it shuts off the display with no standard shut down goodbye message. So I read the book and swapped the two fuses over red to orange, orange to red re-plugged the piggy back fuse in and the display comes on but again all this happens with no ignition on and the unit stays on until I either remove the display or this time when I pull out the fuse I get the power down message Good Bye but yet it does not seem to run off the turn of the key just stays on!! please any suggestions would be greatly appreciated to what the hell im doing wrong as this is baffling me

pipecross panel it is then whats the usual pricings on the £50

what panel filter would you recommend as i have the dirty diesel vrs

Hi all has anyone attempted to fit as the title says? If so do you see any gains and whats the pipe diameters

Well my dad had his height adjusted by skoda so o just pulled mine next to hos n adjisted to suit so far day three rush hour traffic n no flashes of other motorists DMilleaVRS

http://www.briskoda.net/forums/index.php?/topic/291911-Headlight-adjustment DMilleaVRS

I had osrams in my previous car they last me over 3 years and my sister now has it and they are still going strong ive never changed and ive tried my fair amount of bulbs ill try get some pics up during next week as I can oark it next to my dads car with the standard halogen bulbs DMilleaVRS

mine too took it to skoda they said common issue with the boot seals if you open your boot you'll see water in the recess of the seal my dads had his replaced on warrenty im going in hopefully next week have mine repleced also they said they are gong to test the moisture level in the car if its high they will have it in over night with a dehumidifier in it to remove any moisture

I've like most had a serious problem with the quality of the head lights on the tavia, with them being projection type head light the cut off of light was shocking after a visit to skoda they assured me that its the design.... Well i decided that there must be away to better the light spread and well from help of this forum once again i now have a set of headlight light light up the road for all to see. What i did was first of all clean the lenses. Then i found from the forum how to higher the beam useing a allen key and adjusting the white plastic nut above the dip beam. (This improved it slightly but the original halogen bulbs where poor). So an upgrade to some Osram Nightbreakers Unlimited 110% brighter light 40M distance and 30% whiter light did the trick Im now chuffed with the results hopefully some pics to follow on the outcome

Hi baz Have you uploaded a skoda front screen and where abouts are you based mate also do you have the latest software updates for the nav im in terested depending on your location DMilleaVRS

Ive got a rook of pics of tge install what I used and what I removed could put um up or email them if any one needs them DMilleaVRS