Shinzagi

Are the rearlights still available

Im not at home at mo mate but will let you know soon as.. Sent from my GT-I9505 using Tapatalk

Wr r resistors added to module ?? Sent from my GT-I9505 using Tapatalk

Tbh I think ill beable to get it through a taxi plate with 6 blinky if not than resistors sounds good Sent from my GT-I9505 using Tapatalk

Yep ur a star mate... had a play about and as you said mate I was able to disable both side airbags!!! Woohoo Still comes up with a fault code Which just state that both are disabled , also causing the airbag light to flash 6 times upon ignition before eventually going out.. Is this something that cant be avoided do you know.. Sent from my GT-I9505 using Tapatalk

Cheers for the help mate Sent from my GT-I9505 using Tapatalk

Really... what a relief mate that addition stuff went straight over my head so vcds go into long adaptation... im assuming your leon is of similar age??? Vcds is much easier on mk2s than the mk1s.. I hope it is as your leon... would save alot of bother Sent from my GT-I9505 using Tapatalk

Do u still have the airbag module, rear drivers side tail light and ashtray/ stereo surround?? Sent from my GT-I9505 using Tapatalk

Yeah I could stick the old seats back in for test purposes but ideally if I can figure out another way to code.. Trundlenut!! never too far in matters of VCDS!!.. have you come across anyone who has done this??? I cant seem to find definite answer.. in theory if can just tell the airbag module its actually in a vrs rather than an elegance than it would no longer try to communicate with seat airbags. Doing this seems a little more complex. .. The coding seems different no installation list n no long coding helper... just asks for 4 or 5 digit number if I remember. Sent from my GT-I9505 using Tapatalk

Right ive just brought another octavia.. this time a mark 1.. its an elegance but has retrofitted Vrs seats.... obviously with airbag fault due to lack of seats having any.. What are the options to bypass this issue?? I have been given the original seats 2.. thus have the airbags etc.. Is there a way to use VCDS (which I have) to code the module to think its a VRS??? Is it an easier job to fit the airbags into retro seats??? Or are there any other options ive overlooked??? Cheers. Sent from my GT-I9505 using Tapatalk

Oh adamal also the original can gateway taken out of car was coded with immobiliser in installation list.. does this not suggest there is one Sent from my GT-I9505 using Tapatalk

Cheers guys... yeah i thought it would just be the antenna.. Er ok at risk of looking like an absolute muppet.. doesnt the vrs come with immobiliser standard.. I thought it was alarm that was opt extra Sent from my GT-I9505 using Tapatalk

Guys can anyone help any further with this.. Address 19: CAN Gateway (J533) Labels: 7N0-907-530-V2.clb Part No SW: 7N0 907 530 AF HW: 7N0 907 530 AF Component: J533 Gateway H52 1634 Revision: H52 Serial number: 120213F1000982 Coding: 351307 Shop #: WSC 12345 123 12345 VCID: 74EC18EAD7AB53BE8FF-8021 1 Fault Found: 00474 - Control Module for Immobilizer 004 - No Signal/Communication Freeze Frame: Fault Status: 01100100 Fault Priority: 2 Fault Frequency: 1 Reset counter: 2 Mileage: 155903 km Time Indication: 0 Date: 2000.00.00 Time: 09:30:46 Address 77: Telephone (J412) Labels: 7P6-035-730.clb Part No SW: 7P6 035 730 K HW: 7P6 035 730 K Component: TELEFON H15 3200 Revision: 1B001001 Serial number: 00007663746697 Coding: 0A00000000010100 Shop #: WSC 00000 000 00000 ASAM Dataset: EV_UHVNA 002720 ROD: EV_UHVNA.rod VCID: 3A70F6D2BD4FE5CE953-806F 1 Fault Found: 9458195 - Control Module for Cellular Telephone B1052 13 [009] - Open Circuit Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 4 Fault Frequency: 1 Reset counter: 2 Mileage: 155903 km Date: 2000.00.00 Time: 09:28:47 Nothing I do seems to alleviate the signal to immobilizer fault code or that of the telephone although telephone and BT are functioning fine.

Pmd