tomriches

Alright mate how much for the front and rear struts and springs Cheers

Hay how much for the suspension

I have found these if they are any good http://www.nicedeals.co.uk/index.php?cPath=3_311_1375_1376

That one looks pretty good. Think I might that and take off and smooth over the black plastic bits

This year just doing up my bike to put an mot on it then gonna buy a ibiza coupa with the money the let the fun and games begin lol

Forgot to say they have all the mounting points for calipers

I was going to do the bumper and I have wolfrace alloys on at the mo are the vrs springs stiffer cos I thought they would have been the same, its not to be a 1.4 for long once I have sold my bike im going to convert it to a 1.8 turbo

Like the title says can I put thing like rear discs or do I have to change the hubs and things like strut braces and rarb Thanks

On the large black thing there is a square hole take the allen key bolt out to get a better leverage get a 3/8 long extension bar and warm it up and hammer it to the size of the hole put it in the hole and put the ractket on it and pull it as hard as you can towards the bumper then slip it over the tensioner Hope this helps Tom

Hay there what I done to get it off, is to undo the bolts on the other side a (spring loaded bit) and it will make it go slack. To get it back on without the belt on do up the bolts and there is a little square hole in the spring loaded bit. I found an old 3/8 racket extension heat it up till warm enough to be hit with a hammer till it goes in the hole then stick you racket and pull it to the bumper as hard as you can Hope this helps Tom

I have that coming from my n/s front check your suspension wishbone I have recently changed all the bushes and wishbones and only started then could be your bush not in the right place

I think the cars only worth 700 quid lol

I didnt even know there was a sport one and I think ive found one for 100 quid posted just gotta ring up monday and find out

I know I have been looking for months now but cant find the right one most of them are damaged and cost to much

Hay, How much would I expect to pay for a mk1 vrs bumper I have a 1.4 mpi I recently had a accident and ripped a big hole in the bumper I could repair it with some glass resin but like the look of the vrs bumper Thanks tom

my steering rack is leaking from from n/s has anyone ever thought about putting a audi tt rack in as it has a quicker ratio looks like it should just fit in easy thanks tom

Is that the alan key screw on the spring side

Is that the alan key screw on the spring side

yeah it is routed correctly, I got a diagram of it off here to do it, is it better to put the belt on fully then tension it up with the tensioner or do the bolts up on the tensioner then try and squeeze over the pulley I have feted it both ways with no luck

Hay all I'm have troble with trying to get the belt tensioned up and it don't matter how much I pull the tensioner back its still to tight to go back on the belt come off off the car so I know its not the wrong size any help would be much appreciated thank tom