triumph61

If my Fuel TanK is empty there is much more Noise than if the Tank is full. This Week my Car is at the dealer to make a hole Check, it is ordered by Skoda Germany.

The new shock absorber with Number 5q0513049FF were fittet yesterday. othing changed with the Noise. So i told the dealer that Skoda Germany will self look at the car.

Next Try.... Next Thursday i have a new Date with the Dealer. I get new shock absorber with Number 5q0513049FF. Also the shock absorber bearing will be change. It takes 6 Mails from Dealer to Skoda until they agree to change without cost. First Skoda agree only 70% of Material Cost. If that will not fix the noise i place the Car at the dealer until the fix it. I take another car of my company, so they will have time enough.

Yes, it totally aweful. For some days a car with a small Trailer is driving in front of me, The Trailer was wipping at some parts of the Streets. At same points in my Car was the boom. The bass note thrumming is much on small streets where composite stone are. ( https://upload.wikimedia.org/wikipedia/commons/thumb/1/13/Drosselweg.JPG/800px-Drosselweg.JPG ) The shock absorber were changed in Juli 2015 in 5q0513049EM.

I have the same Problems with low frequency Boom. Yesterday i placed my Notebook in the car and take a soundfile. The driving starts at 0.30 and ends 6.13. If its possible use Earphones from Mobile device or Hedaset. With my HP Pro Notebook and Samsung Earphones i can hear the bumbumbum sound. The Speed was from 20km/h up to 55km/h I uploaded it on my Gdrive https://drive.google.com/open?id=0B5INjAze86wxdGp2TnY0cWlPWms

I changed it at my Octavia 1.4 DSG. Now there are Errors in Enigine and Breaking Modul, but all Functions of the Car are working.

VAG / Audi have a nice Idee when they starts SWaP We are looking to code Drvie Profle Selection... no chance. without the SWaP code..

Guys, there is no chance yet to activate the maps. You need a special code und send this one via SWaP (software as produkt) to the Columbus. The same procedure is used for the "müdigkeitserkennung". The dealer gets the code from the factory spezialy for the VIM of the car. The code is on the server of VAG and if its correct the SWaP Code is written the the Columbus oder BCM /Gateway. So there is no chance yet.

In the Wiper is also a ECU included and it is able to code as a slave ECU. But no one knows the coding. Slave [1] :5E1955119 WWS371 140517 Coding: 065DDD

15Minutes should be also ok

The new Shock Absorber are listet in Etka. 5Q0 513 049 EM will be used for Cars <151PS with sports suspension and will be available end of July 2014 5Q0 513 049 FF will be used for Cars <151PS with normal suspension and will be available end of July 2014 The Absobers are the same for Estate and Hatch

Lock the Car for about 6-12 hours. Vcds is not able to Reset the ECU´s, so it takes Time to set the ECU to 0 (Busruhe). VCP-Pro is reseting the ECU at every Coding. So you have not to wait.

On other you can try: after coding the Adations and the RLFS go to the Infotaiment (open and close) and deaktivate the Rainclosing. After some seconds reactivate the Rainclosing again.

VW is changing at Golf 7 (sorry only in German) shock absorber. http://www.t-online.de/auto/news/id_69434506/rueckruf-vw-golf-7-klappergeraeusch-bei-vierlenker-hinterachse.html

Do you have the two, i don´t know the english word, or only one? For ACC you need two. The coding should be possible with VCP and PR Coding. http://www.octaviafan.com/wp-content/uploads/2012/12/cruise-control-and-ACC-on-separate-stalks-e1356529256370.jpg

Hi Andy. Nothing is needed. You only have to check if : (10)-Zugangskontrolle 2-SAD Richtung Komfortoeffnen,tilting (11)-Zugangskontrolle 2-SAD Komfort schliessen,nicht aktiv (12)-Zugangskontrolle 2-SAD Komfort oeffnen,nicht aktiv (15)-Zugangskontrolle 2-Regenschliessen_ein_aus,aktiv (16)-Zugangskontrolle 2-Regenschliessen_art,Permanent (2-Zugangskontrolle 2-Menuesteuerung Regenschliessen,aktiv 11 + 12 has to be active. at 10 you can change from tilting to complete openening

Yes. VCDS is an USA Produkt and VCP-Pro is Poland. ( The producer knows a lot of VAG... :think: ). In the Moment he is working on the new Passat Modules (Superb) to implimate in VCP Pro http://www.vag-tech.eu/

Here is another Video about Rainclosing O3. https://www.youtube.com/watch?v=LpvTDakz2oQ

In the Plus-Package is also a Rain Sensor included. The humity sensor is built in the Rainsensor. it is called RLFS (in German: Regen-Licht-Feuchtigkeits-Sensor Rain-Light-humity-sensor) It is not built in the mirror but in the top of the front window above the camera. The blue dots is the RLFS http://auto.ch.msn.com/news/skoda-octavia-die-dritte-generation-startet-1?page=25

No, i have not see it. The differenz between pre BW45 is, i think, is in the main Firmware of ECU 42/52. My factory settings are: folded every Time by closing with the key. At the moment they only folded with a longer push on the key (comfort closing). That can be change in the BCM, as you know. A friend have a pre BW45. In this week he will get a Update of the 5F Columbus, perhaps the dealer updates also the 42/52.

Yes correct. It is a screenshot of VCP-Pro. The first three is driver door, the second three passenger door. Both startet with row 8. 1-7 is reserved.

Here is my coding of O3 BW >45

Here is the summery https://vcp-forum.de/viewtopic.php?f=27&t=44

The RLS is coded 06A8DD. It is possible that you have to wait about 2-3 hours after locking the car. We have coded and it is not working at once. We take three coffee und then we test again.

Rainclosing is working. You need VCP Pro to activate. VCDS can´t code the RLS https://drive.google.com/file/d/0B5INjAze86wxRHFVUjZub3prVjQ/edit?usp=sharing