erstokke

Brief update: I have changed the original Swing radio with a Kenwood 7000 2-Din Dab radio. 1) I installed the window screen antenna that came with the radio. The airbag cover is fasted with springs had to be lifted upwards. 2) I mounted the handsfree mic on the drivers side and just tucked the cable under the side of the airbag cover. 3) Removed the old radio 4) I used a thick isolated copper wire to "fish" the mic and antenna cables from the side compartments (fuse box) into the radio compartment. 5) Installed the new radio with an installation kit (frame and wiring) that I bought with the radio. 6) It works! Did it yesterday, so it is too early to tell if the window screen antenna is good enough.

I have the antenna on the right side (passenger side) of the car - where the clove compartment is on my car. On the driver’s side (fusebox side) I am doing the same thing with a handsfree microphone. What I am trying to do, is to get these two cables into where the radio sits (not a DAB adapter, I am changing the whole radio).

And how did you get the cable past the glove compartment? I am trying to install a Kenwood dab in my Yeti.