Fayers

Hello from Denmark Sent from my iPhone using Tapatalk

Did you take a photo of the vin nr????. Sent from my iPhone using Tapatalk

Bought the lights on ebay for about 140 euro. So very cheap. Sent from my iPhone using Tapatalk

Did this retrofit in Denmark Sent from my iPhone using Tapatalk

I know because i already have retrofitted the bolero radio. And it dosn't fit. You need too cut alot Sent from my iPhone using Tapatalk

I just orderd a rain sensor "high" version on ebay Part nr 5Q0 955 547 A Only cost 35 e I'm sure i will work better Sent from my iPhone using Tapatalk

You are wrong it is the same sensor. It is mounted on the front windscreen. There 3 types of sensors One for humidity One for rain and light One for humidity, rain and light I know this because i retrofitted it to a car with only humidity sensor Sent from my iPhone using Tapatalk

Buy the buttons from the superb 3v. You ned to do some wire work as vell Sent from my iPhone using Tapatalk

And a change of the dashboard. The slot for the radio drive isn't there. Sent from my iPhone using Tapatalk

You guys with the rain sensor problems. Do you have climatronic og normsl ac. My 16 fabia only has ac but olso rain/light sensor i have the same problems. I know that cars with climatronic has a different sensor because of the humidity sensor. Maby it's more sensitive than the other version Sent from my iPhone using Tapatalk

It's plug and play if the car has telephone. Then the gateway and BCM is high version Sent from my iPhone using Tapatalk

No probs Got it working Sent from my iPhone using Tapatalk

Hey guys Anyone made this "mod" work. I have a Fabia with climatronic, and auto dimming mirror. Sent from my iPhone using Tapatalk

If you have gateway high in your car. You only need too put mfsw buttons in your steering wheel. Change the airbag wiring loom too one for mfsw. You also need too mount two wires. Linbus and 12v+ Sent from my iPhone using Tapatalk

Not all ecu's supports LED lights But if you plug in oem LED numberplate lights there are no fault light

Not that hard too do You need mfsw buttons ( not a new steering wheel ) Airbag wiring for mfsw 2 wires ( one wire too ignition 12v+ and another too lin bus on the central electric bcm Wiper stalk without trip buttons (not 100% needed but looks oem)

Hey guys i have a brand new stalk set with cruise control for sale. It is complete also with the slip ring

If the car has a highline gateway it is no problem. Buttons, slip ring that supports mfsw, mfsw airbag cable, and wiperstalk without trip buttons at the end. Then some coding. Done

Just recived 2 rvc for the O3 from juq-performans (stefan) A small rvc (aftermarket) and a large rvc (original) The new (2015) O3 estate is coming with a larger boot button than the sedan. Same button as the Yeti. I'm going to put it in a O3 Vrs sedan with columbus on monday Will provide pictures and code if someone wants it

You can't get the octavia with oem rvc. But you can code it to work on bolero and the satnav's. But what camera you have to use i'm not sure. Maby a universel number plate light with build in camera and a interface too trancelate the signal to det infotaiment system

You have too retrofit oem skoda rapid sensor kit. With pdc controller and the right wiring ( canbus )

I'm a skoda mec at home in denmark. Just wanted to know how eddie does it

No not yet. The car will arrive may 2014 just doing prep work

Perfect eddie. Will the phone button work alse??? Should i change the wiper stalk?? Thinking about the trip buttons on the stalk

Hey guys. I'm from denmark Just wanted to know how you retrofit the MFSW??? Wich wires do you need to use and where too put them. I've godt a fabia 1.2 tsi with maxidot and i'm gonna fit a aamundsen + also Please help