JFN

Hi/ I'm new on this forum and I'm looking for a list of adaptations for a Octavia 2 pre-FL. Mine is a VRS Combi PD170 with a 23 byte central. Can someone help me? sorry for my english. Thanks.

Hi: My car is a Octavia Combi MKII VRS PD170 with the BMN engine code. I want to know if the EGR valve is working correctly and I have a VAG-COM 12.12.0. I replaced weeks ago the OEM EGR gasket with the reduced 9mm gasket. But I´m not sure if the egr is working properly, even if I haven´t the EML light on. So I need help because I´m not an VCDS expert. I read that te EGR of the PD170 is electronically regulated, and I want to know if it´s possible to check and adjust the EGR using the VAG-COM. Can someone tell if is possible? Or some link to a tutorial to do it? And a reference to the correct values that the EGR need to have in orden to work properly? Sorry for my english. Thanks a lot.

Hi: I´m new in the forum, anyway I need help. At the first time, sorry for my english. My Combi VRS PD170 had the injector recall on april 7th. After the injector replacement, DPF warning lights at least three times on the first ten days. Now, sometimes the idle goes up - 1.000 - 1.100 rpm - and the car seems to not respond good when I press the throttle at low rpm. It hicth when engine is cold. Before the injector recall, my car runs perfect and smoothly. I read various post in the forum about the injector recall and I think that the origin of the symptoms on my car are a new injectors incorrect fitting. Tomorrow I'll return to the Skoda Service and I'll claim that he verified the injector fitting and work. But before that, I need to have some information in order to know if the service was working good in my car. So, does someone know if the service can detect an incorrect injector fitting using the VAG? Does the Idle Stabilization show inf injector are fitted and working properly? Whats about the conditios on testing with VAG? Engine warm or cold - engine at idle or in a certain number rpm? Which measures are correct with VAG in order to garantee a correct injector fitting and working? Can someone help me? Thanks a lot. I'm impressed with the technical level in this forum.