AaronD95

Thanks Sent from my iPhone using Tapatalk

The 3 plug one then. Which also controls the central locking. If so I'll get it swapped over tomorrow and let everyone know how coding it goes Sent from my iPhone using Tapatalk

The comfort one has 3 plugs the bcm has several. The one I've found so far is the 3 plug comfort one Sent from my iPhone using Tapatalk

I've found the comfort module above the clutch. Is it near that then? And there is no power going to the motors at all. Sent from my iPhone using Tapatalk

Ye that's fine should be able to get to it through vagcom just didn't know if it was the bcm or comfort module. Anyone know where the bcm is located. Already going the comfort module Sent from my iPhone using Tapatalk

I've got a spare comfort module to fit but not sure if it's that I need to change or the body control module? Sent from my iPhone using Tapatalk

What controls the electric Windows is it the comfort module or the body control module. I've got a spare comfort module but does that just do the central locking or Windows aswell? Sent from my iPhone using Tapatalk

Will do. Thanks. Sent from my iPhone using Tapatalk

ill have to give them a go and see how they fitSent from my iPhone using Tapatalk

even ones the same make are different prices. Even in motor factors Sent from my iPhone using Tapatalk

had the part numbers cross referenced and there exactly the same so don't know why there's differences in price Sent from my iPhone using Tapatalk

Either one of these are fine? Sent from my iPhone using Tapatalk

thanks. Getting drilled and grooved but there's £10-15 difference in price. Just didn't know if it was because there was a difference in them and which I needed with 4x4 callipers but with them spacers if they had to be 4x4 discs aswell. Sent from my iPhone using Tapatalk

I've got 4x4 callipers with adaptors but don't know what pads and discs to get if 4x4 ones are the same as fwd ones Sent from my iPhone using Tapatalk

anyone able to help?Sent from my iPhone using Tapatalk

Now I've got the spacers. What rear discs do I run. Do they have to be Quattro ones or are all 256mm vented discs the same Sent from my iPhone using Tapatalk

I've got 312mm front brakes and I'm running 17" spiders. It is partly for looks upgrading to 256mm rears. But also. Don't see the point in just doing the front and leaving the back standard Sent from my iPhone using Tapatalk

that would be feat great. Pm me. I'm only in Wrexham Sent from my iPhone using Tapatalk

What are the adaptors? The 6mm ones? Can you buy them or do you make them yourself Sent from my iPhone using Tapatalk

Are these 256mm brake callipers and will they fit the fabia? Thanks Sent from my iPhone using Tapatalk

Front bumper. And rear passanger door

Still got the front bumper

Front bumper?

My electric windows have stopped working completely now. They use to be a bit iffy at times but if I took the fuse out and put it back in they would work fine for a few weeks. But now though they won't work at all not even with the key in the door. Does anyone know the pin out for the connector to the motor. I'm getting a 12v ignition feed but don't know what the others should do. And I have also got a body control unit but remember hearing it has to be of the same part number or higher to work. Is this right? And if it's lower can it be coded to work? Thanks.

What diameter tubing?