MattCutts

likely the drivers door module has water ingress in the plug, common failure can sometimes be fixed with some contact cleaner if they aren't too corroded.

There's a large meet happening tomorrow night at bowlers Trafford, properly organised event. Maybe we could all meet up there?

Perfect for me only a minute away from my house

The more the better. Where we thinking?

I'd be up for a meet 31st

Purchased some xenon headlights and LCR splitter. Oh and topped up the screenwash

just a nip up with a quarter drive ratchet will be plenty

love them wheels rob

10nm pal Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Also make sure the pins in the plug are tight, use a pick to close them up so they grip the cam sensor wiring as tight as possible. Other thing it could be is the new cam sensor is faulty? Sent from my iPhone using Tapatalk

Looking forward to the guide, great work! Sent from my iPhone using Tapatalk

Ive been looking for a pair myself, gave up now it seems no one are stocking them and the ones that are want £185 per headlight Sent from my iPhone using Tapatalk

I've sorted some now thanks, settled with a set of aftermarket projector ones with the drls. Not 100% on them yet but can only try them and see.

Hi mate are you still after a manual mechanism? Sent from my iPhone using Tapatalk

Any idea where I can get a set of these? I'm struggling to find a set of black ones for £200. Sent from my iPhone using Tapatalk

Yeah it's 75w 80 and takes 2.3 litres

The cam sensor is easy to change, about 20 minute job. Remove the top intercooler hose, remove top timing belt cover, you'll see the cam sensor behind the belt it's held on with a 10mm bolt, remove the grommet in the back of the timing belt cover and unplug the wire and feed it through. Refit in reverse.

Had the exact same issue recently. It would go for weeks fine then sometimes wouldn't start for at least a few cranks then when it did start it would stall until it eventually ran fine. Once it wouldn't start once it would continue not to start straightaway for a few days then it'd be ok again for a couple of weeks. I replaced the cam sensor and all has been fine since.

Only a rear fog light is a failure. Reversing lights are for driver aid and are not necessarily needed so arn't part of the test