Miniracer
Members-
Posts
55 -
Joined
-
Last visited
Profile Information
-
Location
Warrington
Car Info
-
Model
1.9tdi polo
Miniracer's Achievements
-
Lowered around 35mm post your pictures
Miniracer replied to Miniracer's topic in Skoda Fabia Mk I (1999-2007)
Got any side pictures of it to see the wheel arch gap? Cheers -
Lowered around 35mm post your pictures
Miniracer replied to Miniracer's topic in Skoda Fabia Mk I (1999-2007)
@Tech1e Looks good mate -
Hi everyone Can you post pictures of your motors lowered around 35mm as I'm thinking of getting koni suspension kit which lowers 35mm Im on 16" alloys at the moment but looking to getting 17" so pictures of either will be brilliant Thanks
-
A friend of mine has F1's on his Evo and they stick like **** and he's running 370bhp
-
budget really isn't too much of an issue, I usually get Michelin ps3's
-
Spotted some alloys I like and just after a point in the right direction with tyre brands and sizes Car 1.9tdi pd100 2002 Diameter 17" Offset 35 Rim width 7j I have a set of 20mm spacers too if these will help slide wider tyres under, also I want to lower the car 35mm will this be ok?
-
What hubs? Will 130s do or can I use the hubs off the s3 etc?
-
yeah 1.9tdi polo pd100, how would I be able too tell if I don't require different hubs? Front brakes at the moment are 256mm and it's an 02 plate if this is any help Is this on a 9n Polo? In my experience, they can be fitted with either set of brakes on the 100hp, so it's hard to say whether you need to change the hubs or just calipers and carriers.
-
Hi Thinking of planning out my next lot of upgrades one being the brakes I really fancy a set of brembos off a Cupra r or s3 etc My only issue is I've no idea where to start as there is plenty of guides on how to do these mods on a 130 but not a pd100 Please point me in the direction if I've missed a thread that is about this issue
-
Sorry only just seen your post my bad haha
-
I found this too that's why I wasn't sure, so everyone goes for 5w40 to that spec ?
-
Hi My 1.9tdi pd100 (ATD) is coming up for a service soon and I'm wandering where everyone gets their oil from? Up too now I've done 2 services myself using shell helix 5w30 and I've been getting it from europarts Can anyone point me in the direction of an alternative place or oil Also does anyone know if running on 5w40 like some other threads say is the better option to go down? My car is 175bhp at the minute soon too be 210bhp if this is a factor to consider Best regards
-
Right ok, well I might try it see how the car performs I can always put the original back inBe interesting to see the results
-
No would this have to be done ?
-
FurbyPD100 I've got them just haven't fitted yet as I wanted to get all the parts I can Will this make a difference once fitted? The pd130 maf sensor is a bigger diameter compared to the pd100 original one