ladasik

Same thing here, it started with Bluetooth acting funny but was going through the menus fine...now it's stuck on pairing Bluetooth as I've reset to factory values...can it be faulty main board ? I had it replaced twice as my right indicator was constantly on...could it be the same module responsible for that ? I have a diagnostic cable cable...would it show anything if that module is malfunctioning ?

@bb429 - did you got that BCM replaced under warranty ? And do you know which BCM do you have (vag number in VCDS) @silver1011 - which BCM do you have ? I have 1k0 937 087 p I will wait until my NCT (MOT equivalent in UK) which I have in FEB and then I'm going to chance those 35W Londoncolour ones.

I got 2 BCM's fried because I've "upgraded" my lights to aftermarket HID's - both were replaced by dealer under warranty but now I know it was the fact that HID's were installed. Have you ordered 35W HID kit or 55W kit ? I'm still very tempted to get 35W kit as previous one was 55W - but if you had a problem with 35W I wont chance it and I will just stay with Nightbreakers.

Problem solved with draught seals , they are made from nice soft rubber and D or P frofile will do the job oh and i got my house doors "sealed" as well so 2 birds with one stone happy days

Could you kindly Tell me What change have you made through vcds ? Is it just ticking the bi-xenon installed or any other bits have to be amended too ? Thanks a million @phil no it was not a canbus friendly set , but I would imagine that the fact it was 55w the self check wasn't showing any bulb errors

Hi, is there any home remedy for squeeking/rattling/noisy rear shelf ? I have tried putting cloth on the hinge that shelf is fixed on, vaseline in hope that it will prevent squeeking on that hinge, lifting the shelf by putting something directly underneath it...and it jus drives me crazyyyyyyy....any one else has the same problem ? Or maybe someone has fix it with a success ? Or is a new shelf the only option ?? I really hope that someone has similar problems which would mean that I'm not insane

@silver1011 - have you fitted those HID's into your superb or just the Octavia ? I had an HID kid fitted to my Superb and it had fried 2 BCM modules. Maybe it was due to fact that the HID kit was 55W not 35W or maybe because it hasnt been coded properly...I dont know. I have turned back to halogen bulbs - but once I have tasted the HID it is really no comparison when it comes to the whiteness and brightness of the HID kit installed before. I'm just looking to get a confirmation that the HID's from londoncolour wont fry my BCM module for the 3rd time - maybe proper coding as well. Some guidelines from a person that has them fitted and they work properly without generating any errors...so please please please help.

Hi Lads, I'm an owner of 2011 Superb...just to start that I got the car only in August and BCM unit has already been changed twice Other than that I love my Superb