skodaloverbelgium

Hi, yesterday i installed a reverse camera in my 2012MY superb. I wired everything as it should be but i face some problems that i cannot solve. The screen of my Amundsen+ (RnS315) stays black when i put the car in reverse, it only says "Look? Safe to move". And there is the options button but i cannot click it. It seems to be "frozen". The amundsen knows i am clicking on it because it gives the usual 'beep' but nothing happens then. The camera is an boot handle camera with RCA plug. I use an interface as converter for the rca to the amundsen pin plugs. I already tested everything with a multimeter and everything should be fine. I already found some topics on the web with people who have exactly the same issues but nobody seemed to be able to help. Maybe here? greets

hi, how did you solve the issue? i have the same problem greets

I started this topic http://www.briskoda.net/forums/topic/351589-disable-the-light-diagnostics-bulb-out-warning/ about the bulb out warning fix

Hi, I made a little video about how to fix the bulb out warning with a VAS 5054a (VCDS alternative). I know a lot of people are looking for this fix so i decided to put it online: https://youtu.be/9ffmGfC_TI4 SO NO RESISTOR ANYMORE!!! I also coded my front parking lights to work as DRL's alongside the normal DRL. It should also work for VW models. Greets from Belgium

hi, do you mean for the fogs or the drl lights? I own a pre facelift model so i am not sure the bulbs are the same as yours. But you can find them in the manual of your car. greets

Hi, i made a little how to video about how to change the DRL's on a Superb II. https://youtu.be/cK330yVknYU I also changed the fogs to an LED and disabled the bulb warnings so i didn't have to use resistors. I will probably make a video about the bulb out warnings later and post it on this website to. greets