Jump to content

Rajakay

Members
  • Posts

    41
  • Joined

  • Last visited

Profile Information

  • Gender
    Not Telling
  • Location
    Sheffield

Car Info

  • Model
    Skoda Superb 170 DSG 2009

Rajakay's Achievements

Contributor

Contributor (5/17)

  • First Post
  • Collaborator
  • Reacting Well
  • Conversation Starter
  • Week One Done

Recent Badges

2

Reputation

  1. But with a dpf regen wouldn't the dpf light come on?
  2. Had the AA out today when the problem started. As soon as the AA driver got to me he walked over and asked if it smoked when I revved which I replied yes. He gave it a Rev and no blue smoke and idle went to normal level. Luckily enough he had seen the high idle before he revved and also heard the unusual engine noise. No faults came up on his obd reader. Checked oil level and said it is high. Drained oil to correct level. There had been a 1 extra litre in engine. He advised me that this could have been the most likely cause and if it started to play up again it could well be a faulty injector.
  3. Can an air leak cause rough idle and blue smoke?
  4. No it's clearly visible coming from the left side where the exhaust is. Had the return pipes changed yesterday and no more oil leak but the problems come back this morning clouds of blue smoke from exhaust.
  5. Hi guys I have a cr170 on a 58 plate. Recently my car every now and then will start to idle at 900 rpm and when I set off kicks out blue smoke from exhaust. Some times I see smoke coming from the bonnet. Inspected it and it smelt like oil burning coming from underneath the turbo area. Took it to my local and he advised me that it was the return pipe from the turbo to the sump that had a small oil leak. 6 months ago I had a recon turbo fitted and my oil pump and bottom half of my engine done as my oil pump packed in and caused my turbo to blow and damaged the engine. My question is if there is an oil leak from the return pipe how is it that my exhaust would blow blue smoke. Sometimes I'll drive it with the problem and then suddenly when I stop at some lights the revs would go back to normal and the problem would be gone no smoke what so ever. It is now a daily problem. Will start up fine and an hour or 2 later would start to play up and then 10 mins later it's fine again. Any advise is welcome guys.
  6. Thank you very much. This has solved all my problems.
  7. Skoda being awkward with giving out part numbers. But managed to get them both. But they have gave me part number for a throttle body which I didn't want. I need part number for intake manifold flap motor that goes onto side of inlet manifold not front. Anyone know which part I'm talking about?
  8. Hi my cars a cr170 on a 2009 I'm looking for part numbers for a inlet manifold flap motor and a secondary water pump, hope someone can help.
  9. Picking car up today and taking it straight back to guy who's done the turbo recon as he gave me 6 months warranty and the cars literally had the turbo in a week.
  10. Had turbo reconditioned around a week ago and now have this code come up, any ideas?
  11. Had turbo reconditioned around a week ago and now have this code come up, any ideas?
  12. Cranks OK by sounds of it but oil pump needs replacing and work on bearings. I think the previous owner was the one who used sealant on the oil pump but not a 100% sure as other garage said they didn't use sealant. Another £1300 though. In total it's cost me £2200.
  13. I had the exact same problem. Changed all 4 tyres and had 4 wheel alignment but noise was still there. Changed all 4 hubs which quietend it a little but the droning is still there.
  14. Took car to a proper garage this time. He's stripped the bottom of the engine and has said that the previous owner had the pump removed at sometime and who ever put it back in used loads of sealant. The sealant has ended up blocking the oil feed pipe which has then caused damage to the crankshaft bearing in the engine. He sent me 2 pictures one of the oil pump and one of some part of the engine that's been scored. From what I remember he said the bearing had been marked and their was small particles of metal in the oil. IMG_1464.JPG IMG_1465.JPG
  15. Just been notified by my local that the oil pressure switch didn't work. They say the have visually inspected the oil filter housing and no oil is getting there. They say it's the pump that's at fault. Any ideas?
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.