vladnitro

Did you tried to just pull out the buttons without taking down the whole door panel, take the buttons apart and inside there are some metal parts that usually get oxidized from the water that gets in the doors (fabia mk2 has a huge problem with water getting inside the door) and the metal pieces inside the buttons often get oxidized. Just try to get them out and clean them.

Hi Jonro, yes it worked perfecly, I managed to move the projector (magnefier) closer to the bulb so now it even disperses the light better instead of beeing concentrated in one spot and with the help of the blades that cuts the high beam to the lower beam there is no problem blinding the drivers in front of the car, now with the high beam I see like a truck and the low beam does not distract any drivers. Thanks again for the info Xman! :clap:

Xman, thank you so much! you are right! Respect!

I updated my post here http://www.briskoda.net/forums/topic/353990-headlight-adjustment/ not to double post on this topic.

This is what I was afraid of I have to put the headlights in the oven so I could split them... at least that's how I saw on youtube to split the headlight :no: Do you guys know a better way ? Unless I can find the adjustment for left or right, if there is one. And I also have to take the bumper off in order to take the headlight out no? :peek: Thank you

Hi, This is the one with the problem... This is the other one that is normal: What do you think ? Thank you.

Yes

Hi, Sure you can, every car has this adjustment. My right headlight is way off to the right, I think it's an aftermarket one since it has different clippers for the head bulb. I bought my car second hand and the previous owner must had a crash and changed it. I can see the projector moved in the headlight. I'll post some pictures tomorrow

Hi there, Does anyone know how to adjust the headlights beam from left to right or vice versa on the projector lights ? I have searched all the web and this forum and still didn't managed to find the answer. Thank you!

So... does anyone know how to adjust the beam left or right ? thank you