Foxy

Withdrawn from sale...........too late people......going to store for summer.

I can confirm full plug and play, and fully working. I have fitted the facelift Yeti rear bumper to the Mk1 yeti and only replaced the sensors. The wiring has remained the same. I would add that the wiring is a tad tight to the offside sensor but after trimming the loom tape and re-binding it's all a-ok.

Despite my last *final offer*, I really can't store these as my unit is more stacked than I expected! £500 and a pack of beers, no post, no offers, cash and take them quick before I change my mind!

Very last call.........£599.......no less.........

I have a couple of user manuals in need of new home. The first is a Mk2 Octavia manual from 2006 era Complete with all usual books, including service book which has been used and stamped to a point as per pics. £12 inc.delivery UK mainland. (paypal payment) The second is a Mk2 FL Octavia manual from 2009 era Complete with all usual books, including service book which has been used although only the first page (vehicle data sticker) as per pics. £17 inc.delivery UK mainland. (paypal payment) Can do the both £25 delivered. Collection possible. Located Northants near M1 J17/J18

630 final price and then I'll wrap 'em up for storage..........

I think i've heard talk of rear seats needing modding but I'm not 100% sure. The fronts are *VAG platform universal* for this chassis so will fit fine to the best of my knowledge. Price reduced.

Up for grabs is a full set of new shape Skoda Octavia VRS seats in black with the red trim. The donor car was an estate with only 3000 miles on the clock. Some very minor marks (and these look worse in the pics!) Rear seat foam slightly squashed however it's just the wire in the pad and will pull out ok. Located in Northants, near M1 J17 / J18. *** WITHDRAWN FROM SALE ***

It's been a wee while but the Skoda brand has made its way back into our "stable". We bump around with mostly VWs across all household members - give or take, however the new acquisition is an 11-reg Yeti 2.0TDi SE with just 23k on the clock. The car was bought with a bit of damage and it's been a chore to get it sorted due to delays at bodyshop, however it's now back in my possession and almost complete. Have bought a few parts from the stealers but acquired larger bits second hand to keep costs down. The price of panels and bumpers has about doubled in less than 10 years - seems crazy! For the rear bumper I could have had it repaired however the stupid black textured plastic was scuffed and seeing as a new shell (just this bit) was over 350 quid I decided otherwise. I did some research and examined the facelift models - and found the bumper much nicer but would still fit the pre FL version. I found a used bumper for 60 quid complete. The only slight issue was parking sensors are different despite using same module. Got new sensors from germany less than 50 quid for 4x brand new! The front parking sensors were fitted by a previous owner and unfortunately aftermarket. If I feel the need, I may update the PDC module and but OEM sensors for front and the loom. Work in progress.......more pics shortly

Sensors ordered from German £32 ish delivered for new/gen parts.

A friend has now checked ETKA and ELSA, and says the plugs are same part number, and wiring is same pins on module......so should be A-OK!

Cheers. By the way - it's the newer sensors with older module that i'm considering

Was it the power wiring - daisychain versus radial?

Gents, I am hoping for a quick bit of advice.... I have a 2011 Yeti with just rear PDC (module 5J0919475A) and sensors 4x p/no 4H0919275. Hope thats easy to follow lol. What I am doing is fitting a facelift model rear bumper that already has PDC holes and the rear brackets. I don't have the sensors. What I believe is that the sensor p/no is 5Q0919275 for the new style bumper. There are two things i need to know please...... a) - will sensors 5Q0919275 work with module 5J0919475A. IF YES... - do I need any wiring or connector mods to plug those sensors into my loom? MTIA

Anyone know if the parking sensors from later model will work with earlier model? cheers