dkarolj

Drive (forward) and Reverse movement by accelerator and not just idle movement by "crawling"

On my car HHC holds the car for 2s on inclines and that is enough for DSG to kick in after brake depress and engage the "crawl" mode or D/R.

I had the same problem look at this post

Finaly done using VCDS, now I was able to do adaptation and adjust "Display correction of fuel gauge"

look here https://www.silux.hr/proizvodi/retrovizori?car=400702

langers2k thank you for all the help and time

CCD is not the primary goal for me, I would like to adjust fuel level gauge as low fuel is coming on at cca. 15l in tank and by user manual it should be around 9l.

So update on my problem. Today with VCDS 18.2.1 no luck Adaptation channel on my instrument cluster can't be opened it is greyed out. So if anybody has any idea about SA code that could enable it please post it.

Good...try it with launch mode on and good MAF I love this engine!

I drive it daily. It is a great car and i love it, packed with addons. Fuel economy for me over 50.000 km is avg. 10.3 l/100 km. Sound, acceleration and 4x4 drive is fun all year long.

Yes, I also have gone over ElsaWin workshop manual over that information and haven`t found the code. As far as I read on the forums it is true for older cars (built before 2005.). VCP has a Login finder where you can enter a range for code, but the problem on my Superb is that it has a time lock. If you enter 2 wrong codes you need to wait before you can input it again. So that tool is useless on my car. here is a video how it works https://youtu.be/4__RA2VM4YM?t=39s

As far as I know yes, but I have to obtain Security Code to try it out. My main goal is to ajust fuel gauge, everything else is a bonus :) For Golf 1K its easy Security Access 13861 = Adaptation Enabling

As I saw on ross for Octavia adaptation you need also Security Code it is 13861. It will be easy just if someone can help me with code for Superb 2 Instrument Cluster. Ross Wiki Octavia

I need to adapt my fuel gauge and try to turn on cruse control speed display on MFD.

Hi all, I will have to ask for help about activating adaptations on my Skoda Superb II (3T) - MY2010 As you can see I have VCP but I can`t find the right Security Code/Access to input and activate adaptation of group 17 - Instrument. Have already tried 20103, 25327, 13861 but they don`t work. So does anybody on this forum has idea or code that I can use to access the adaptation settings? Thanks!

Hardware solution to disable headlight washer is rather simple. On Superb you just need to pull out fuse nr. 36 in the cabin. That fuse is dedicated to the headlight washing only then on VCDS scan you will get an error - Open circuit.

http://m.aliexpress.com/item/32317887706.html for $7.9 now this was my replacment for left one. It works great and no error on scan like the old one where one LED was broken. Poslano sa mog GT-I9300 koristeći Tapatalk

This is my 3.6V6 fuel consumption...think its great for a big V6 https://youtu.be/JNx8pb-4KLw

Wow in my county (Croatia) for SuperbII 3,6 V6 in official Skoda minor service is around £80 it includes 5,5l oil VW504 and filter + work. You can also agree with the shop to bring your own oil with 504 spec so then it costs you only even less as 6l of 5w30 oil in stores is arround £40. Brake fluid change is £17 with oil and work. Nice

Take off and measure there are 2 sizes according to TRW https://www.trwaftermarket.com/en/catalogue-search-results/#market=gb&vehicleType=P&manufacturerId=106&modelId=7588&vehicleId=%7C28256%2CFront+Wheel+Drive+(03%2F08+-%3E+05%2F10%3B+140HP+%2F+103KW)%7C28257%2CFront+Wheel+Drive+(07%2F08+-%3E+05%2F15%3B+170HP+%2F+125KW)&variantId=28257&productGroupId=82 288 or 312 mm

Glad to hear...enjoy! dk

Check out my topic http://www.briskoda.net/forums/topic/379180-autocom-coding-and-feature-activation/ successfully activated HH on my thanks to members on this forum via AutoCom CDP+ dk

Success! Just few minutes ago I activated HHC on my SII 3.6 V6 with Delphi AutoCOM. As I was unable to get any VCDS member near me today I decided to try coding ABS control module myself with just AutoCOM. First I activated HHC by changing 84;3D;A0;16;19;22;00;00;21;12;05;E4;98;1E;00;41;AA;00 <-- Stock to 84;3D;A0;16;19;22;00;00;21;12;05;E4;98;1E;00;41;AB;00 <-- HHC Code was accepted and instructions said to turn off ignition for 30 sec to store the new code. HHC is now on and holds the car on inclines. Then I tried to activate XDS 84;3D;A0;16;19;22;00;00;21;12;05;E4;98;1E;00;41;AB;00 <-- XDS 84;3D;A0;16;19;22;00;00;21;12;05;E4;98;1E;00;41;AB;08 <-- HHC+XDS but it said operation aborted so it seams ABS module does not support XDS and cant activate that. So if you input the wrong code it does not restart the module to 00 00... it just does not accept the code. Once again thanks to all members here and special thanks to @langers2k for a working solution to my problem.

you were spot on with addresses for MK60 look at https://youtu.be/TmdTq6g-s9w

Trial and error I managed to contact "exhaust" and he is already helping me alot. He is far away from me in Croatia so will try to also contact nearby member of our local Skoda forum. Would like to have VCDS as backup if AutoCOM does not preform