djduese

https://onedrive.live.com/View.aspx?resid=3AE6945C79E4C9E!17729&wd=target(5E - Octavia 3 FL.one|326dfe26-71ca-45e5-81c0-c94d626da7ad/Octavia 3 FL|a87ea3bd-9978-4578-b9e0-13dbee35f07e/)&wdo=2&authkey=!AMn8y885S2R-6Xg Information: it is forbidden to make screenshots from it (copyright) You can use the search function in vcds. The channels have the same name. Only the directories are different. For example it is not Zugangskontrolle, now it is in ZV-Heck or something like that.

Sure but i have it only in german. But not in text. Only as pics, so not to use with translator

No. The order of channels is different. Also model year 2017 has no coding in controller 09. All bytes are 00

It is depended of model year. In germany from model year 2017 the adaptation is sorted different to model year 2016

I have another scan from a Superb I coded. It has the part number 3V0 920 750. Performance Monitor can not be activated per coding

I only talk about mk3, not mk2. In Germany, there are other cluster installed. For example : 3V0 920 710 A I have activated it on several Superb mk3 and had never the message of "out of range". I think the UK cluster are completely different

I have a Octavia but I have activated lap timer several times at different cars. Superb is also MQB. Sport Information (Performance Monitor) is a completely other function than the lap timer. Sport information is at Octavia and Superb only with sportsline/RS. Lap timer is always in cluster. No matter if Octavia or Superb.

Laptimer is only in tacho

Controller 17 Byte 1 Bit 3 Without any login

That's wrong. Lap timer only needs a coloured multi function display and has nothing to do with performance monitor. Lap timer is shown in multi function display as a separate menu

If you want to open sunroof completely by comfort open you have to set SAD Richtung Komfortoeffnen to open and in controller CA "Ziellage bei Komfortöffnen" to "Schiebelage"

Sunroof is in 09. Adaptation "Schiebedach" "SAD Komfort oeffnen" and "SAD Komfort schliessen" both has to be changed to active

In 5F you have enabled the adaptations with Lane Assistant. These are the options for Blind Spot. Because of that you have to deactivate them again and have to enable the adaptations with Lane Departure Warning. Lane Departure Warning in 5F shows you the Buttons for Lane Assist

You have enabled the wrong or too many adaptations in 5F. Fault in 44 comes at coding. This fault could get erased easily by deleted fault Codes. In 5F could be because of wrong adaptations in 5F. Perhaps you have enabled lane-assistant instead of lane-departure-warning?

To retrofit the camera you also have to change windscreen

Ok. Write me in pm. I need photo from Leuchte2SL and leuchte5TFL. And photo of Cornering_Light_Adaptation

If you have vcds than make an admap from controller 09 and send it to me in pm. I will look on it and send you back the right coding

Of course it will. The initial test doesn't relate to this light functions

That update doesn't matter for that

This is too much. You only have to change Leuchte2SL Light function E2 from "Blinken Links Aktiv (Beide Phasen)" to "Blinken Links Hellphase" and in Leuchte3SL Light function E3 Blinken rechts Aktiv (Beide Phasen)" to "Blinken rechts Hellphase". Nothing need in Leuchte4TFL or Leuchte5TFL

But VCP is safer, because with VCP, you can change the threshold manually in km/h-steps.

Or VCP

This is equal to Superb until MY 2016 ;-)

This is possible. Controller 09 Login 31347 Adaption ZV_Allgemein-Funk bei Klemme 15 ein Change to active Then you can use your remote even if ignition is on

There are three different methods on O3 FL to activate cornering lights. Sometimes it is not sufficient to change the adaption in Leuchte12 and Leuchte13. On vrs it is for examples Leuchte2, Leuchte3, Leuchte4 and Leuchte5. Further there had to be change some adaption in the config adaptions of cornering lights