deanmarshall73

I really need to clean the whole lot including manifold . Popped off the intake it’s well gunked up. I did my mk4 golf tdi . It’s was a lot easier the egr is more accessible.just wondering how easy it was.gaskets etc .

Anybody help me with removing an egr valve on a Fabia 2 1.4 tdi . Is it easy enough. Needs cleaned

Meant to say nearside . Long day

I was thinking bushes . It’s got what looks like a new ball joint on the offside

I’ve just bought a Fabia green line . It has a a worn outside edge in the front nearside . Also pulls to the left . Any ideas . Start with tracking maybe

my 1.4 tdi 80bhp is the same mechcnic says its the release bearing he said just leave if you can live with the noise its an 07 with 125000 on the clock never had a clutch so bearing wont get changed til it needs one

nobody knows

will a vw polo 6y1 motor fit on my skoda fabia 6y2 same plug fitment i only need the pcb controller from top of motor

door mirrors are fine so is the central locking not goin to buy a new one just have to keep a look out for a second hand one

its the temic controller i need the motor is fine . just got to get the right one

its the model ive got its a 6y2 sk240ddrs very hard to get second hand been looking at polo ones but not sure

thanks for your help

do i need to get one from skoda dealer or is their a cheaper alternatve

anyone?

can get my electric windows working by removing a fuse and replacing it but when i close the door and lock it then open it again there dead .have to pull the fuse again. is it the door lock that is the problem telling the windows to lock for security but somehow its not telling them to actvate them again when you open the car .

did you manage to fix this mine is the same

did you ever get this fixed

take the wheel off and remove the black inner trim its much easier dont have to muck about with the wipers or brake the plastic clips noticed the drain holes when i did my arb bushes

this is the same as mine

ct1 you can use it under water

i had a problem with my front windows when i bought my fabia mk1 . no windows working . checked switches power to motor and fuses . all ok .then i noticed when i removed one of the fuses for 30 secs then replaced it they would start working . i spliced the wiring before the fuse box and was goin to use a separate switch . but wat i found out eventully was because my rear doors were leaking water in to the car it was causing havoc with the electrics . so before you go changing switches motors and comfort control mods check for wet carpets in the back . i checked every wire in the drivers door loom for continuity. and they were fine . i found that when it rained really heavy the next day my windows didnt work

i did mine and used ct1 its about £8 pound a tube. we use it for sealing shed windows when its ****ing down

hello my name is dean new member