ikoseomer

Problem is solved with another pump. I have one more question. I have now servo, but I hear the sound of the pump constantly without turning the steering wheel. As it rotates, it sounds okay like it should be. But there is some noise without turning the steering wheel. I don't know if it was like that before and I notice it now. Vcds shows for the coding that the angle sensor is coded according to the abs / esp module but my sensor is on the rack. And it's also number 4 for the light vehicle. What should be the correct code? Now it is 00140. Should i make some adaptation for the steering sensor?

You mean my original pump before changing is fine? The measurements in steer. aid sensor were changing when i turn the steering wheel, but the pump motor status and pump motor voltage is 0 always

Hello everyone! I have a problem with my lovely Fabia and it is happening to me for the first time. The car is a Fabia 1.4 MPI The power steering lamp is on, the steering wheel is stiff. VCDS fault code: 00566 - Steering Assistance Operation: Implausible Signal I cleared and it reappeared. I checked the fuses. I also checked the ones above the battery, I only have 1,2,3 and 8,10. With them, everything looks good again. I don't know if there is another for the servo. The battery is one year and something. I measured and it is 12.40v at rest. I haven't had any problems with the steering wheel so far. It was very soft and I enjoyed it a lot. Apparently there are no leaks or anything. Here some vcds measurements on channel 44 before changing the pump. I changed the pump. My was KOYO 6Q0423155AA and i changed it with KOYO 6Q0423155AH. But the problem continues. I don't have the same error anymore but, I have error 01309 from channel cent. elct. Now I can't even connect to channel 44 where there is power assist steering. The original pump was a koyo 155AA and now this one is a koyo only 155AH. Is it possible that it does not match mine? Please advice what to do :) thanks in advance